1. Uvod
The Inkbird IDC-S1RH is a high-performance digital preset scale counter designed for precise counting and control in various industrial applications. This device features a compact DIN (48x48mm) size, clear LED displays for both process value (PV) and set value (SV), and user-friendly tactile switches for easy parameter configuration. It supports both NPN and PNP input types and offers SSR and contact outputs, making it versatile for different control systems. The built-in EEPROM ensures data retention for up to 10 years, providing reliable operation.
2. Značajke proizvoda
- Digital DIN Counter: Standard 48x48mm panel mount design.
- Raspon brojanja: 1-9999 with selectable UP/DOWN counting modes.
- Maximum Counting Speed: Up to 5 kcps (kilocounts per second) at a 1:1 rate.
- Preset Scale Range: Configurable from 0.001 to 9.999.
- Zadržavanje podataka: EEPROM stores data for up to 10 years without power.
- Kompatibilnost ulaza: Supports both NPN and PNP input types, switchable.
- Korisničko sučelje: Tactile switches for intuitive setting adjustments.
- Funkcija zaključavanja tipki: Sprečava slučajne promjene postavki.
- Prikaz: High-visibility LED displays; 9.9mm red LED for Process Value (PV) and 8mm green LED for Set Value (SV).
- Napajanje: AC 100-240V ± 10% 50/60Hz.
- Tipovi izlaza: Contact output (AC250V 3A resistive load, ON/NC) and SSR output (DC 12V, Max. 40mA).
- Vanjsko napajanje: DC 12V/50mA (max.) for sensor use.
3. Sigurnosne informacije
Please read and understand all instructions before installation and operation. Failure to follow these instructions may result in product damage, property damage, or personal injury.
- Osigurajte napajanje voltage odgovara specifikacijama uređaja.
- Isključite napajanje prije izvođenja bilo kakvog ožičenja ili održavanja.
- Instalaciju treba da izvodi samo kvalifikovano osoblje.
- Do not operate the device in environments with excessive moisture, dust, corrosive gases, or high temperatures beyond specified limits.
- Avoid strong vibrations or impacts to the device.
- Nemojte rastavljati niti modificirati uređaj.
4. Sadržaj paketa
Provjerite da li su sve stavke prisutne u paketu:
- 1 x Inkbird IDC-S1RH Digital Counter
- 1 x Connector Plug (for wiring terminals)
- 1 x engleski priručnik za upotrebu
Slika 4.1: Package contents including the IDC-S1RH counter, connector plug, and manual.
5. Proizvod je gotovview i komponente
The IDC-S1RH features a clear front panel for display and control, and a rear panel for electrical connections.
Slika 5.1: Front view of the IDC-S1RH Digital Counter. It displays the Process Value (PV) and Set Value (SV) and includes buttons for 'MD' (Mode), 'RST' (Reset), and arrow keys for value adjustment.
6. Instalacija i ožičenje
6.1 Montaža na panel
The IDC-S1RH is designed for panel mounting. Create a cutout in your panel with dimensions of 45mm x 45mm (1.77 x 1.77 inches). Insert the counter into the cutout and secure it using the provided mounting brackets.
6.2 Ožičenje
Refer to the wiring diagrams below for proper electrical connections. Ensure all connections are secure and correct before applying power.
Slika 6.1: Side view showing the wiring diagram for the IDC-S1RH. It details connections for IN, Gate, Reset, +12V, 0V, NC, COM, NO, and Power.
Slika 6.2: Pozadi view of the IDC-S1RH, illustrating the screw terminal block for electrical connections. Terminals are numbered for easy identification.
Opisi terminala:
- IN (Terminal 1): Counting input. Connect your NPN/PNP sensor here.
- Gate (Terminal 2): Gate input for enabling/disabling counting.
- Reset (Terminal 3): External reset input.
- +12V (Terminal 4): 12V DC output (max. 50mA) for powering external sensors.
- 0V (Terminal 5): Ground for external sensor power.
- NC (Terminal 6): Normally Closed contact output.
- COM (Terminal 7): Common terminal for contact output.
- NO (Terminal 8): Normally Open contact output.
- Power (Terminals 9 & 10): AC 100-240V power input.
- SSR Output (Terminals 11 & 12): DC 12V (Max. 40mA) Solid State Relay output.
7. Operacija
7.1 Uključivanje
After proper wiring, apply power to the device. The display will illuminate, showing the current count (PV) and the set value (SV).
7.2 Adjusting Set Value (SV)
- Pritisnite MD button briefly to enter the setting mode for the Set Value. The SV display will start flashing.
- Koristite Up (
) i Dole () arrow buttons to increase or decrease the flashing digit. - Pritisnite MD button again to move to the next digit.
- Once the desired SV is set, press and hold the MD button for a few seconds to save the setting and exit the setting mode.
7.3 Resetting the Count
The counter can be reset in three ways:
- Ručno resetiranje: Pritisnite RST dugme na prednjoj ploči.
- External Reset: Apply a signal to the Reset terminal (Terminal 3).
- Power On Reset: The counter can be configured to reset automatically upon power cycling (refer to parameter settings).
7.4 Funkcija zaključavanja tastera
To prevent accidental changes to the settings, the key lock function can be activated. Refer to the parameter settings section for instructions on enabling and disabling this feature.
8. Postavke parametara
The IDC-S1RH has several configurable parameters to adapt to different applications. Accessing and adjusting these parameters typically involves pressing and holding the MD button for an extended period (e.g., 3-5 seconds) to enter the parameter menu. Use the Up/Down arrows to navigate through parameters and adjust their values, and the MD button to confirm and move to the next parameter.
Common parameters include:
- Način odbrojavanja: Select between UP or DOWN counting.
- Tip unosa: Switch between NPN and PNP sensor inputs.
- Preset Scale Factor: Adjust the multiplication factor (0.001 - 9.999) for the input pulses to display the desired unit.
- Način izlaza: Configure the behavior of the relay and SSR outputs (e.g., momentary, latched).
- Reset Reset: Set whether the counter resets on power-up or only via manual/external trigger.
- Brava: Enable or disable the key lock function.
- Pohrana podataka: Configure if data is stored in EEPROM or not.
For a detailed list of parameters and their specific adjustment procedures, please refer to the comprehensive manual included in the product package.
9. Održavanje
The Inkbird IDC-S1RH is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure longevity:
- čišćenje: Pažljivo obrišite ekran i casinObrišite mekom, suhom krpom. Ne koristite abrazivna sredstva za čišćenje ili rastvarače.
- Uslovi okoline: Ensure the operating environment remains within the specified temperature and humidity ranges. Avoid exposure to direct sunlight, excessive heat, or extreme cold.
- Provjere veze: Periodically inspect wiring connections to ensure they are secure and free from corrosion.
10. Otkrivanje problema
If you encounter issues with your IDC-S1RH counter, refer to the following common problems and solutions:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Uređaj se ne uključuje. | Nema napajanja; nepravilno ožičenje; neispravan izvor napajanja. | Check power connections (Terminals 9 & 10). Verify power source voltage. Ensure wiring is correct according to the diagram. |
| Counter is not counting. | Sensor not connected; incorrect sensor type (NPN/PNP); faulty sensor; Gate input active; counting speed too high/low for sensor. | Check sensor wiring to IN (Terminal 1). Verify sensor type setting (NPN/PNP). Ensure Gate input (Terminal 2) is not preventing counting. Test sensor functionality. Adjust counting speed if possible. |
| Output does not activate. | Incorrect output wiring; set value not reached; output mode misconfigured; faulty relay/SSR. | Verify output wiring (Terminals 6, 7, 8 for contact; 11, 12 for SSR). Ensure the count reaches the set value. Check output mode parameters. Test the load connected to the output. |
| Postavke se ne mogu promijeniti. | Funkcija zaključavanja tipki je aktivna. | Disable the key lock function in the parameter settings. |
| Ekran prikazuje nepredvidljive vrijednosti. | Electrical noise/interference; loose connections. | Ensure proper grounding. Use shielded cables for sensor inputs if interference is suspected. Check all wiring connections for tightness. |
Ako problem i dalje postoji nakon isprobavanja ovih rješenja, obratite se korisničkoj podršci Inkbirda.
11. Specifikacije
| Feature | Specifikacija |
|---|---|
| Proizvođač | Inkbird Tech |
| Broj modela | IDC-S1RH-110 |
| Vrsta izvora napajanja | Corded Electric |
| Voltage | AC 100-240V ± 10% 50/60Hz |
| Eksterna izlazna snaga | DC 12V / 50mA (max.) for sensors |
| Display | PV: 4-digit, 9.9mm red LED; SV: 4-digit, 8mm green LED |
| Range brojanja | 1-9999 |
| Max Counting Speed | 5 kcps (rate 1:1) |
| Preset Scale Range | 0.001 - 9.999 |
| Tip unosa | NPN and PNP switchable |
| Contact Output | AC250V 3A (resistive load) ON/NC |
| SSR izlaz | DC 12V (Max. 40mA) |
| Mehanički životni vek | 10,000,000 operations Min. |
| Electronic Lifespan | 100,000 operations Min. |
| Backup podataka | 10 godina (EEPROM) |
| Metod resetiranja | Power On / External / Manual |
| Veličina izreza | 45mm x 45mm |
| Radna temperatura | -10 to 55°C (14 to 131°F) (no icing or condensation) |
| Temperatura skladištenja | -25 to 65°C (-13 to 149°F) (no icing or condensation) |
| Vlažnost okoline | 35 - 85% relativne vlažnosti |
| Dimenzije paketa | 13.72 x 6.35 x 5.59 cm (5.4 x 2.5 x 2.2 inča) |
| Težina | 204.11 g (7.2 oz) |
| UPC | 705701587019 |
12. Garancija i podrška
12.1 Informacije o garanciji
Inkbird products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Inkbird website. The warranty typically covers defects in materials and workmanship under normal use for a specified period from the date of purchase.
12.2 Korisnička podrška
If you have any questions, require technical assistance, or need to report an issue with your Inkbird IDC-S1RH Digital Preset Scale Counter, please contact Inkbird customer support through their official website or the contact information provided in your product documentation. When contacting support, please have your product model number (IDC-S1RH) and purchase details ready.
