Ohaus ST10C-A Uputstvo za upotrebu pen merača

1. Uvod

The Ohaus ST10C-A Pen Meter is designed for simple, fast, and accurate measurement. This economical device offers reliable performance for various applications. Its durable construction and user-friendly features make it suitable for consistent use in diverse environments.

2. Proizvod je gotovview

The ST10C-A Pen Meter is a compact, handheld device. Key features include a clear digital display, an intuitive on/off button, a protective sensor cap, and a wrist strap for secure handling.

Ohaus ST10C-A Pen Meter displaying '8.8 pH' on its screen, with red caps and a white body.

Slika 1: Ohaus ST10C-A Pen Meter. This image shows the Ohaus ST10C-A Pen Meter. It features a digital display for pH readings, an 'On/Off' button, and a durable, waterproof design with red accents.

The meter's IP67 waterproof ABS housing ensures protection against dust and water ingress, making it suitable for wet conditions. An automatic shutdown feature helps conserve battery life.

3. Podešavanje

Raspakivanje: Carefully remove the meter and all accessories from the packaging. Inspect for any damage.
Instalacija baterije: The meter typically comes with batteries pre-installed or requires simple installation. Refer to the battery compartment cover for instructions on opening and inserting batteries, ensuring correct polarity.
Sensor Preparation: Remove the protective sensor cap. If the sensor appears dry, condition it according to standard pH electrode practices (e.g., soaking in storage solution or pH 7 buffer for a short period).
Početna kalibracija: For optimal accuracy, perform an initial calibration using fresh pH buffer solutions (e.g., pH 4.01, 7.00, and 10.01). Follow the calibration procedure outlined in the meter's specific quick start guide or on-screen prompts.

4. Uputstvo za upotrebu

Uključivanje/isključivanje: Pritisnite On/Off button located on the front of the meter to turn the device on or off.
Mjerenje:
- Ensure the sensor cap is removed.
- Rinse the sensor with distilled water before and after each measurement.
- Uronite senzor u sample solution, ensuring the sensor tip is fully submerged.
- Gently stir the solution to ensure homogeneity and allow the reading to stabilize.
- Read the pH value displayed on the screen once it becomes stable.
Automatsko isključivanje: The meter is equipped with an automatic shutdown feature to conserve battery life. It will power off after a period of inactivity.

5. Održavanje

Čišćenje senzora: After each use, rinse the sensor thoroughly with distilled or deionized water. Do not wipe the sensor bulb, as this can cause static charges and damage the sensitive glass.
Skladištenje: Always replace the protective sensor cap after use. Ensure the cap contains a small amount of storage solution (or pH 7 buffer) to keep the sensor hydrated. Never store the sensor dry or in distilled water.
Zamjena baterije: When the battery indicator appears on the display, replace the batteries promptly. Refer to the battery compartment for the correct battery type and installation procedure.
Generalno čišćenje: The meter's housing can be cleaned with a damp tkanina. Izbjegavajte korištenje jakih kemikalija ili abrazivnih sredstava za čišćenje.

6. Otkrivanje problema

Problem	Mogući uzrok	Rješenje
Mjerač se ne uključuje.	Prazne ili nepravilno instalirane baterije.	Zamijenite baterije, pazeći na ispravan polaritet.
Netačna ili nestabilna očitanja.	Sensor is dirty or dry. Calibration is required or incorrect. Temperature difference between sample and buffer.	Clean and rehydrate sensor. Perform a fresh calibration with new buffer solutions. Dozvoli samples and buffers to reach the same temperature.
Sporo vrijeme odziva.	Sensor is old or contaminated.	Clean the sensor. If problem persists, consider replacing the sensor.

7. Specifikacije

Model: ST10C-A
Brand: Ohaus
Stanovanje: IP67 waterproof ABS
Karakteristike: Protective sensor cap, automatic shutdown, wrist strap
Dimenzije: Approximately 15 x 10 x 4 inches (Product dimensions as listed, note this might be packaging size)
Težina: Approximately 2 Pounds (Product weight as listed, might be shipping weight)

Note: Specific measurement ranges, accuracy, and resolution details should be confirmed with the official Ohaus product data sheet.

8. Garancija i podrška

For detailed warranty information, technical support, or service inquiries, please refer to the official Ohaus website or contact your local Ohaus representative. Keep your purchase receipt for warranty claims.

Official Ohaus Webstranica: www.ohaus.com

	OHAUS ST10R & ST20R Pen ORP Meter Instruction Manual Comprehensive instruction manual for OHAUS ST10R and ST20R waterproof pen ORP meters, detailing setup, operation, maintenance, specifications, and compliance information.
	OHAUS ST Series Pen Meter Instruction Manual - ST10 pH Meter Guide Comprehensive instruction manual for the OHAUS ST Series Pen Meter, model ST10. Learn about pH measurement, accuracy, maintenance, and specifications for this waterproof pen pH meter.
	OHAUS ST serija Pen metar Uputstvo za upotrebu Uputstvo za upotrebu za OHAUS ST seriju pH metar u obliku olovke, posebno za vodootporni ST20 pH metar u obliku olovke. Obuhvata prvu upotrebu, kalibraciju, održavanje i specifikacije.
	OHAUS a-AB33M1 Višeparametarski analizator i stolni mjerači: Uputstvo za instalaciju i upotrebu Sveobuhvatno uputstvo za upotrebu za OHAUS a-AB33M1 višeparametarski analizator, a-AB33PH pH metar, a-AB41PH pH metar i a-AB33EC mjerač provodljivosti. Obuhvata instalaciju, rad, održavanje, sigurnost i tehničke specifikacije za laboratorijsku upotrebu.
	OHAUS AquaSearcher AP50MM Prijenosni fotometar Uputstvo za upotrebu Sveobuhvatno uputstvo za upotrebu prenosnog fotometra OHAUS AquaSearcher AP50MM, koje detaljno opisuje instalaciju, rad i održavanje kolorimetrijskih i mutnomjernih mjerenja na terenu i u laboratoriju.
	OHAUS ST400 i ST400M Prijenosni pH i višeparametarski mjerač Upute za uporabu Ovo uputstvo za upotrebu pruža detaljne smernice za rukovanje i održavanje prenosnog pH metra OHAUS ST400 i prenosnog višeparametarskog metra ST400M. Saznajte više o instalaciji, podešavanju, postupcima merenja, kalibraciji, održavanju i tehničkim specifikacijama za tačne i pouzdane rezultate.

Ohaus ST10C-A