Masonite Uputstvo za upotrebu za preklopna vrata sa 6 panela

Uvod

This manual provides comprehensive instructions for the proper installation, operation, and maintenance of your Masonite Bi-Fold 6-Panel Door. Please read all instructions carefully before beginning installation to ensure safe and correct assembly and long-term performance.

Sigurnosne informacije

• Uvijek nosite odgovarajuću ličnu zaštitnu opremu (LZO) kao što su zaštitne naočale i rukavice tokom instalacije.
• Ensure the work area is well-lit and free of obstructions.
• Handle the door panels with care to prevent injury or damage to the product.
• Držite male dijelove i hardver dalje od djece.
• Ako niste sigurni u vezi s bilo kojim korakom, obratite se kvalificiranom stručnjaku.

Lista komponenti i dijelova

Verify that all components are present before beginning installation. If any parts are missing or damaged, contact Masonite customer support.

• Prefinished Bi-Fold Door Panels (2 sections)
• Top Track
• Pivot Brackets (top and bottom)
• Guide Wheel/Roller
• Hinges (pre-attached)
• Door Knob/Pull (may be included or sold separately)
• Pričvršćivači (vijci)

Image: A white, prefinished bi-fold door with a six-panel design. The door consists of two vertical sections, each with three recessed rectangular panels, designed to fold inward for space-saving operation.

Postavljanje i instalacija

Potreban alat:

• Measuring Tape
• Olovka
• Bušilica
• Odvijač
• Nivo
• Saw (if trimming is required)

Koraci instalacije:

1. Pripremite otvaranje: Provjerite da li je otvor vrata okomit, ravan i pod pravim uglom. Izmjerite visinu i širinu kako biste potvrdili da odgovara dimenzijama vrata (30x80 cm).
2. Instalirajte gornju traku: Secure the top track inside the door frame header using the provided fasteners. Ensure it is level and centered.
3. Install Bottom Pivot Bracket: Mount the bottom pivot bracket to the floor or door frame sill, aligning it with the top track.
4. Attach Door Hardware: Insert the top pivot pin into the pre-drilled hole on the top edge of the door panel. Attach the guide wheel/roller to the other top edge of the door panel. Insert the bottom pivot pin into the pre-drilled hole on the bottom edge of the door panel.
5. Objesite vrata: Lift the door panels and insert the top pivot pin into the top pivot bracket in the track. Guide the bottom pivot pin into the bottom pivot bracket. Engage the guide wheel/roller into the top track.
6. Podesite i poravnajte: Adjust the pivot pins and guide wheel to ensure the door hangs plumb and operates smoothly. The door should close flush with the frame.
7. Install Door Knob/Pull: Attach the door knob or pull according to its specific instructions.

Uputstvo za upotrebu

The Masonite Bi-Fold Door is designed for smooth and quiet operation. To open the door, gently pull the door knob or handle, allowing the panels to fold inward. To close, push the door panels until they are fully extended and meet in the center of the opening.

Održavanje

• čišćenje: Clean the prefinished door surface with a soft, damp krpu i blagi sapun. Izbjegavajte abrazivna sredstva za čišćenje ili jake hemikalije koje bi mogle oštetiti završnu obradu.
• Provjera hardvera: Periodically inspect all hardware, including hinges, pivots, and the top track, for any signs of wear or looseness. Tighten screws as needed.
• podmazivanje: Apply a silicone-based lubricant to the top track and guide wheel/roller annually to ensure continued smooth operation.
• Popravak farbanja: If the prefinished surface gets scratched or chipped, use a matching white paint to touch up the affected area.

Rješavanje problema

Specifikacije

Garancija i podrška

For information regarding product warranty or to obtain technical support, please refer to the official Masonite webweb-mjesto ili direktno kontaktirajte njihovu službu za korisnike. Sačuvajte račun kao dokaz o kupovini.

Masonite Customer Service: www.masonite.com/contact-us