1. Uvod
The Tektronix AFG1022 Arbitrary Function Generator is a versatile instrument designed for generating various waveforms required in laboratory and testing environments. With a bandwidth of 25 MHz or 60 MHz and dual output channels, it provides an output amplitude ranging from 1 mVpp to 10 Vpp across its full bandwidth. This device offers a comprehensive set of features for waveform generation, making it a valuable tool for a wide range of applications.
Ključne karakteristike uključuju:
- Dual-channel operation with 25 MHz bandwidth.
- Izlaz amplitude from 1 mVpp to 10 Vpp.
- 14-bit vertical resolution and 1 µHz frequency resolution.
- 50 built-in arbitrary waveforms.
- Support for continuous, modulation, sweep, and burst modes.
- Dedicated 3.95-inch TFT LCD display for clear visualization.
- User-friendly front panel and menu navigation.
2. Sigurnosne informacije
Before operating the Tektronix AFG1022, please read and understand all safety instructions to prevent injury and avoid damage to the instrument or other connected equipment. This device is designed for use by qualified personnel only.
Opće sigurnosne mjere:
- uzemljenje: Always ensure the instrument is properly grounded. The power cord provided has a three-prong plug for this purpose. Do not defeat the grounding-type plug.
- Izvor napajanja: Connect the instrument to a power source that is within the specified voltage range (100-240V AC, 50/60 Hz). Verify the line selector switch on the rear panel is set correctly for your local voltage.
- ventilacija: Ensure proper ventilation around the instrument. Do not block ventilation openings. Overheating can cause damage.
- Okruženje: Operate the instrument in a clean, dry environment. Avoid exposure to moisture, extreme temperatures, or corrosive gases.
- servisiranje: Refer all servicing to qualified service personnel. Do not attempt to service the instrument yourself unless you are qualified to do so.
- Kablovi i konektori: Use only specified cables and connectors. Ensure all connections are secure before applying power.
- čišćenje: Isključite napajanje prije čišćenja. Koristite meku, suhu krpu. Ne koristite tekuća ili aerosolna sredstva za čišćenje.
3. Šta se nalazi u kutiji
Upon unpacking your Tektronix AFG1022 Arbitrary Function Generator, please verify that all the following items are included:
- Tektronix AFG1022 Arbitrary Function Generator Unit
- Izjava o usklađenosti
- CD (containing software and documentation)
- Korisnički priručnik (ovaj dokument)
- Fuse (2 pieces, spare)
- Cables (3 pieces, including USB and BNC cables)
- Potvrda o kalibraciji
- Kabl za napajanje
If any items are missing or damaged, please contact your Tektronix supplier or customer support immediately.
4. Podešavanje
Follow these steps to set up your AFG1022 Arbitrary Function Generator for initial use.
4.1 Raspakivanje i pregled
- Carefully remove the instrument and all accessories from the packaging.
- Inspect the instrument for any signs of physical damage that may have occurred during transit. If damage is found, contact your supplier.
- Retain the original packaging materials for future transport or storage.
4.2 Priključak za napajanje
- Locate the power inlet on the rear panel of the AFG1022.
- Potvrdite Birač linija prekidač na zadnjoj ploči postavljen na ispravnu jačinu zvukatage for your region (110V AC or 220V AC). Adjust if necessary.
- Connect the provided power cord to the instrument's power inlet and then to a grounded AC power outlet.
4.3 Connecting Outputs
- Identify the two output channels (Out1 and Out2) on the front panel. These are BNC connectors.
- Connect appropriate BNC cables from the desired output channel(s) to your test circuit or device under test.
- Ensure the impedance setting on the AFG1022 matches the impedance of your load (typically 50Ω or high impedance).
5. Uputstvo za upotrebu
Ovaj odeljak pruža prekoview of the basic operation of the Tektronix AFG1022. For detailed instructions on specific functions, refer to the comprehensive user manual provided on the included CD.
5.1 Uključivanje i početni ekran
- Press the power button located on the front panel to turn on the instrument.
- The display will show the Tektronix logo and then transition to the main waveform generation interface.
5.2 Basic Waveform Generation
The AFG1022 can generate various standard waveforms and arbitrary waveforms.
- Selecting Waveform Type: Use the dedicated buttons below the display (Sine, Square, Ramp, Pulse, Arb, Noise) to select the desired waveform.
- Setting Frequency: Use the numeric keypad and the rotary knob to input the desired frequency. The display will update in real-time.
- Podešavanje Amplitude and Offset: Podesite amplitude (Vpp) and DC offset (V) using the corresponding soft keys and the rotary knob.
- Omogućavanje izlaza: Pritisnite On/Off button for Channel 1 (Out1) or Channel 2 (Out2) to enable the waveform output. The button will illuminate when the output is active.
5.3 Napredne funkcije
- modulacija: Pritisnite Mod button to access modulation settings (AM, FM, PM, FSK, PWM).
- Sweep: Configure frequency sweeps by pressing the Sweep softverski taster.
- rafal: Generate burst waveforms by pressing the Burst softverski taster.
- proizvoljni talasni oblici: The AFG1022 supports user-defined arbitrary waveforms. Refer to the full manual for instructions on creating and loading custom waveforms.
6. Održavanje
Proper maintenance ensures the longevity and optimal performance of your Tektronix AFG1022.
6.1 Čišćenje
- Always disconnect the power cord before cleaning the instrument.
- Use a soft, dry cloth to wipe the exterior surfaces. For stubborn dirt, a cloth lightly dampened with mild detergent and water may be used.
- Do not use abrasive cleaners, solvents, or strong chemicals, as these can damage the plastic parts and labels.
- Avoid spraying liquids directly onto the instrument.
6.2 Zamjena osigurača
If the instrument does not power on, check the fuse located in the power inlet on the rear panel. Ensure the replacement fuse matches the specified type and rating (e.g., 250V, 2A). Refer to the full manual for detailed instructions on fuse replacement.
6.3 Kalibracija
For continued accuracy, periodic calibration by qualified service personnel is recommended. Refer to the calibration certificate for the recommended calibration interval.
7. Otkrivanje problema
This section provides solutions to common issues you might encounter with your AFG1022. If the problem persists, contact Tektronix customer support.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Instrument se ne uključuje. | No power, faulty power cord, blown fuse. | Check power cord connection. Verify power outlet. Check and replace fuse if necessary. Ensure line selector is correct. |
| No waveform output. | Output channel not enabled, incorrect amplitude/offset settings, faulty cable, incorrect load impedance. | Press the On/Off button for the desired channel. Verify amplitude and offset settings. Check BNC cable connections. Ensure load impedance matches instrument setting. |
| Prikaz je prazan ili zamrznut. | Software error, internal fault. | Power cycle the instrument (turn off, wait 10 seconds, turn on). If issue persists, contact support. |
| Incorrect waveform shape/frequency. | Incorrect settings, external interference. | Double-check all waveform parameters (frequency, amplitude, offset, modulation settings). Ensure proper shielding of cables. |
8. Specifikacije
The following table lists the key specifications for the Tektronix AFG1022 Arbitrary Function Generator. All specifications are typical unless otherwise noted.
| Parametar | Vrijednost |
|---|---|
| Naziv modela | AFG1022 |
| Bandwidth | 25 MHz |
| Kanali | Dvokanalni |
| Izlaz Amplitude | 1 mVpp do 10 Vpp |
| Okomita rezolucija | 14-bitni |
| Rezolucija frekvencije | 1 µHz |
| Built-in Waveforms | 50 Arbitrary Waveforms |
| Display | 3.95-inčni TFT LCD |
| Izvor napajanja | Electricity Powered |
| Voltage | 100-240V AC (selectable) |
| Težina artikla | 4.9 kilograma (10.8 funti) |
| Dimenzije paketa | 17.2 x 14 x 11.4 inča |
| Proizvođač | Tektronix |
| Datum prve dostupnosti | 15. jul 2015 |
9. Jamstvo i podrška
Tektronix products are designed for reliability and performance. For specific warranty terms and conditions applicable to your AFG1022, please refer to the warranty information provided with your purchase or visit the official Tektronix website.
Korisnička podrška:
If you require technical assistance, have questions about your instrument, or need to arrange for service, please contact Tektronix customer support. Support contact information can typically be found on the Tektronix webweb-mjestu ili u dokumentaciji koja dolazi s vašim proizvodom.
When contacting support, please have your instrument's model number (AFG1022) and serial number ready. The serial number is located on the rear panel of the instrument.
For the latest information, drivers, software, and additional resources, please visit the official Tektronix webstranica: www.tek.com
