Uvod
This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E). Please read all instructions carefully before beginning installation to ensure correct assembly and to prevent damage or injury. Keep this manual for future reference.
Sadržaj paketa:
- Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount
- Komplet montažnog pribora (razni vijci, tiplovi, podloške)
- High Speed HDMI Cable (1080p 1.4v)
- 6-inch Tri-axis Spirit Level
- Uputstvo za upotrebu
Slika 1: Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E) components, including the main mount assembly, VESA plate, and accessories like the spirit level and HDMI cable.
Važne informacije o sigurnosti
WARNING: Failure to read and follow these instructions can result in serious personal injury, property damage, or voiding of your warranty.
- Ne postavljajte ovaj proizvod na zidove koji nisu konstrukcijski čvrsti. Osigurajte da površina za montažu može podnijeti ukupnu težinu nosača i vašeg televizora.
- Always use a stud finder to locate wood studs or ensure you are mounting into solid concrete/brick.
- Do not exceed the maximum load capacity of 36.2kg (80lbs).
- Ovaj proizvod je dizajniran samo za upotrebu u zatvorenom prostoru.
- Ensure all screws are securely tightened, but do not overtighten.
- Držite djecu i kućne ljubimce podalje tokom instalacije.
- Ako niste sigurni u vezi bilo kojeg dijela procesa instalacije, obratite se kvalificiranom stručnjaku.
Specifikacije
| Feature | Detalj |
|---|---|
| Broj modela | HDTV-E |
| Brand | Invision |
| Materijal | Čelik visokog kvaliteta |
| Boja | Crna |
| Kompatibilnost veličine ekrana | 24-55 inča |
| VESA kompatibilnost | 100x100mm to 400x400mm (Not suitable for 75x75mm VESA) |
| Maksimalni kapacitet opterećenja | 36.2 kg (80 lbs) |
| Wall Profile (Min-Max) | 55mm (2.2 inches) to 500mm (19.7 inches) |
| Movement Type | Tilt, Swivel |
| Maksimalni kut nagiba | 5 do 8 stepeni |
| Uključena dodatna oprema | High Speed HDMI Cable, Tri-axis Spirit Level |
Slika 2: Key specifications of the Invision HDTV-E mount, including load capacity (36.2kg), minimum wall profile (55mm), and maximum extension (500mm).
Postavljanje i instalacija
1. Kontrolna lista prije instalacije
- Verify VESA Compatibility: Check the back of your TV for four mounting holes. Measure the horizontal and vertical distance between these holes. This mount supports VESA patterns from 100x100mm to 400x400mm. Note: Not suitable for 75x75mm VESA.
- Vrsta zida: Determine if your wall is wood stud, solid concrete, or brick. Different mounting hardware is required.
- Potreban alat: Pencil, drill, stud finder (for wood studs), level (included), measuring tape, socket wrench, screwdriver.
- Weight Check: Ensure your TV's weight does not exceed 36.2kg (80lbs).
Slika 3: Guide to checking VESA compatibility. Measure the distance between mounting holes to determine your TV's VESA pattern. The image illustrates how to measure width and height for VESA standards.
2. Attaching the TV Brackets to Your Television
- Pažljivo postavite televizor ekranom prema dolje na meku, čistu površinu kako biste spriječili oštećenje ekrana.
- Identify the correct screws (M4, M6, or M8) from the hardware kit that fit your TV's mounting holes. Use washers if necessary.
- Attach the two vertical TV brackets to the back of your television using the selected screws. Ensure they are securely fastened but do not overtighten. The brackets should be centered horizontally on the TV.
3. Mounting the Wall Plate to the Wall
- Odredite visinu montaže: Decide on the desired height for the top of your TV. Mark this on the wall.
- Pronađite potporne grede (za zidove od drvenih greda): Use a stud finder to locate the center of two adjacent wood studs. Mark these locations.
- Pozicija zidne ploče: Hold the wall plate against the wall at the desired height, aligning it with the marked stud centers. Use the included spirit level to ensure it is perfectly horizontal. Mark the drill holes.
- Izbušite pilot rupe:
- For wood studs: Drill pilot holes using a 5.5mm (7/32 inch) drill bit to a depth of 60mm (2.36 inches).
- For solid concrete/brick: Drill pilot holes using a 10mm (3/8 inch) drill bit to a depth of 70mm (2.75 inches). Insert concrete anchors into the holes.
- Sigurna zidna ploča: Attach the wall plate to the wall using the lag bolts and washers provided. Tighten all bolts firmly.
4. Hanging the Television
- Uz pomoć, pažljivo podignite televizor pomoću priloženih nosača.
- Pričvrstite nosače TV-a na zidnu ploču. Provjerite je li TV sigurno postavljen na zidnu ploču.
- Engage the safety locking screws or mechanisms on the bottom of the TV brackets to prevent accidental dislodging.
Uputstvo za upotrebu
The Invision HDTV-E mount offers flexible viewing options with its tilt and swivel capabilities.
Slika 4: The mount's design allows for extensive swivel and tilt adjustments, providing optimal viewing angles from various positions in a room.
Podešavanje okretnog mehanizma
Gently grasp the sides of your television and carefully pull it away from the wall. You can then pivot the TV left or right to achieve your desired viewing angle. The mount allows for a wide range of swivel motion, up to 500mm (19.7 inches) extension from the wall.
Podešavanje nagiba
To adjust the vertical tilt, gently push the top or bottom of the television forward or backward. The mount supports a tilt angle of 5 to 8 degrees. The lockable tilt mechanism ensures the TV stays at your chosen angle.
Cable Management
The mount features integrated cable management covers on the arms. Route your cables (including the included HDMI cable) through these covers to keep them organized and out of sight, ensuring a clean installation.
Slika 5: Detaljno view of the mount's cable management system and the lockable tilt mechanism, designed for a tidy and secure setup.
Održavanje
- Redovni pregled: Periodically check all mounting screws and bolts to ensure they remain tight. Over time, vibrations or adjustments can cause them to loosen slightly.
- čišćenje: Očistite nosač mekom, suhom krpom. Izbjegavajte abrazivna sredstva za čišćenje ili rastvarače koji bi mogli oštetiti završnu obradu.
- podmazivanje: Pokretni dijelovi nosača su dizajnirani za nesmetan rad i uglavnom ne zahtijevaju podmazivanje. Ako primijetite bilo kakvu ukočenost, obratite se korisničkoj podršci.
- Ograničenje težine: Never exceed the maximum weight capacity of 36.2kg (80lbs).
Rješavanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| TV nije ravan nakon instalacije. | Wall plate was not installed level. | Remove TV, loosen wall plate screws, adjust with spirit level, re-tighten. |
| Nosač se čini nestabilnim. | Screws are loose; wall not suitable; weight exceeded. | Check all screws for tightness. Verify wall type and TV weight. If issues persist, consult a professional. |
| Teškoće s podešavanjem nagiba/okretanja. | Mechanism might be stiff or overtightened. | Ensure no cables are obstructing movement. Check for any adjustment knobs that might be too tight. Do not force movement. |
| Nedostaju dijelovi. | Greška u pakovanju. | Contact Invision customer support immediately for replacement parts. |
Informacije o garanciji
The Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E) comes with a 25-godišnja garancija na proizvod. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
For warranty claims or further details, please contact Invision customer support.
Korisnička podrška
If you have any questions, require assistance with installation, or need to report a missing/damaged part, please contact Invision Technology (UK) Ltd. customer support.
Proizvođač: Invision Technology (UK) Ltd
Globalni trgovački identifikacioni broj (GTIN): 05060264551392
Please refer to the product packaging or the official Invision webstranicu za najnovije kontakt informacije.
Slika 6: Product packaging displaying manufacturer information and contact details for Invision Technology (UK) Ltd.
