1. Uvod
This manual provides essential information for the proper installation, operation, and maintenance of your Datalogic QuickScan Lite QW2100 Bar Code Reader. The QW2100 is an entry-level linear imager designed for reading long, truncated 1D bar codes, commonly found in retail, light industrial, document processing, and office environments. Its ergonomic design ensures user comfort during daily operations.
Molimo vas da pažljivo pročitate ovaj priručnik prije upotrebe uređaja kako biste osigurali siguran i efikasan rad.
2. Sigurnosne informacije
Pridržavajte se sljedećih sigurnosnih mjera opreza kako biste spriječili ozljede i oštećenje uređaja:
- Ne izlažite uređaj ekstremnim temperaturama, vlazi ili direktnoj sunčevoj svjetlosti.
- Izbjegavajte ispuštanje uređaja ili izlaganje jakim udarcima.
- Ne pokušavajte otvarati ili modificirati uređaj. Za sve servisne radove obratite se kvalificiranom osoblju.
- Keep the scanning window clean to ensure optimal performance.
- Koristite samo dodatnu opremu i napajanja koje je odobrio Datalogic.
3. Sadržaj paketa
Provjerite da li su sve stavke prisutne u paketu:
- Datalogic QuickScan Lite QW2100 Bar Code Reader
- USB Cable (if USB interface model) or RS-232/Keyboard Wedge Cable
- Quick Start Guide (refer to this manual for full instructions)
- Optional: Stand (if purchased as a kit)
4. Proizvod je gotovview
The Datalogic QuickScan Lite QW2100 features a compact and ergonomic design for comfortable handheld use. Key components include:
- Prozor za skeniranje: Emits the scan line and reads bar codes.
- Dugme za okidanje: Activates the scanning process.
- LED indikator: Provides feedback on scanning status (e.g., successful read, error).
- Cable Connector Port: For connecting the interface cable.
5. Podešavanje
Follow these steps to set up your QW2100 Bar Code Reader:
- Povežite kabl: Insert the appropriate interface cable (USB or RS-232/Keyboard Wedge) into the connector port at the base of the scanner. Ensure a secure connection.
- Poveži se s host uređajem:
- USB sučelje: Plug the USB connector into an available USB port on your computer or POS system. The operating system should automatically detect and install the necessary drivers.
- RS-232/Keyboard Wedge Interface: Connect the cable to the corresponding port on your host device. Configuration may be required using Datalogic Aladdin software or by scanning configuration bar codes (refer to the full programming manual for details).
- Uključeno: The scanner typically powers on automatically once connected to the host device. The indicator LED may illuminate to confirm power.
- Optional Stand Setup: If using the optional stand, assemble it according to its instructions and place the scanner in the stand for hands-free operation.
For advanced configuration, such as changing symbologies or interface settings, refer to the Datalogic Aladdin Configuration Software or the comprehensive programming manual.
6. Uputstvo za upotrebu
To scan a bar code with your QW2100 reader:
- Cilj: Point the scanning window of the reader at the bar code you wish to scan.
- Aktiviraj: Press and hold the trigger button. A bright scan line will project from the scanning window.
- skeniranje: Position the scan line across the entire bar code. The QW2100 is designed for wide-angle scanning, making it effective for long or wide codes.
- Potvrda: Upon a successful read, the scanner will emit an audible beep (if enabled) and the indicator LED will flash. Release the trigger button.
For optimal performance, ensure the bar code is clean and not excessively creased or damaged. Adjust the distance between the scanner and the bar code for the best read.
7. Održavanje
Proper maintenance ensures the longevity and performance of your bar code reader:
- Čišćenje prozora za skeniranje: Koristite meku krpu koja ne ostavlja dlačice dampened with a mild, non-abrasive cleaner (e.g., glass cleaner) to gently wipe the scanning window. Avoid harsh chemicals or abrasive materials that could scratch the surface.
- Čišćenje C-aasing: Obrišite vanjski dio casing s mekim, damp tkanina.
- Inspekcija kablova: Regularly check the interface cable for any signs of damage, fraying, or loose connections. Replace damaged cables immediately.
- Skladištenje: Kada se ne koristi, skener čuvajte na čistom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.
8. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Skener se ne uključuje. | Cable not connected properly or host device not providing power. | Ensure the cable is securely connected to both the scanner and the host device. Try a different USB port or host device. |
| Scanner does not read bar codes. |
|
|
| Scanner reads intermittently. | Damaged cable or loose connection. | Check the cable for damage and ensure connections are secure. Replace cable if necessary. |
9. Specifikacije
| Feature | Detalj |
|---|---|
| Broj modela | QW2120-BK |
| Brand | Datalogic |
| Tehnologija povezivanja | USB Cable (also available in RS-232/Keyboard Wedge) |
| Izvor napajanja | AC (via host device USB or external power supply for RS-232) |
| Scan Rate | 400 skeniranja/sekundi |
| Dimenzije proizvoda (D x Š x V) | 6.69 x 2.56 x 2.76 inča (17 x 6.5 x 7 cm) |
| Težina artikla | 4.2 unce |
| Boja | Crna |
| Podržane simbolike | Most standard 1D bar codes (e.g., EAN/UPC, Code 39, Code 128, Interleaved 2 of 5, etc.) |
10. Garancija i podrška
Datalogic products are designed and manufactured to the highest quality standards. For warranty information, please refer to the warranty card included with your product or visit the official Datalogic website.
For technical support, product registration, or to download the latest drivers and software (such as Datalogic Aladdin Configuration Software), please visit the Datalogic support portal or contact your local Datalogic representative.
Webstranica: www.datalogic.com
