KanexPro Full-Motion Tilt/Swivel TV Wall Mount

KanexPro Full-Motion Tilt/Swivel TV Wall Mount Instruction Manual

Model: Full-Motion Tilt/Swivel TV Wall Mount

1. Uvod

This manual provides essential instructions for the safe and proper installation, operation, and maintenance of your KanexPro Full-Motion Tilt/Swivel TV Wall Mount. Please read this manual thoroughly before installation and retain it for future reference. Incorrect installation may result in product damage or personal injury.

Sigurnosne informacije

  • Osigurajte da površina za montažu može sigurno podnijeti ukupnu težinu nosača i televizora.
  • Ne prekoračujte maksimalnu nosivost od 30 kg (66 lbs).
  • Always use appropriate safety equipment during installation.
  • Consult a qualified professional if you are unsure about the installation process or wall type.
  • Držite djecu i kućne ljubimce podalje tokom instalacije.

2. Sadržaj paketa

Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to install the mount. Contact customer support for assistance.

  • Full-Motion TV Wall Mount Assembly
  • Pribor za montažu na zid (vijci, tiple)
  • TV Mounting Hardware (various screw sizes, spacers)
  • Uputstvo za upotrebu
KanexPro Full-Motion Tilt/Swivel TV Wall Mount

Slika 2.1: Gotovoview of the KanexPro Full-Motion Tilt/Swivel TV Wall Mount. This image displays the main assembly of the wall mount, including the wall plate, articulating arms, and the VESA compatible TV plate.

3. Postavljanje i instalacija

Follow these steps carefully to ensure a secure and stable installation of your TV wall mount.

3.1 Provjere prije instalacije

  • Vrsta zida: Determine if your wall is solid concrete, brick, or wood stud. Different wall types require specific mounting hardware.
  • Stud Finder: If mounting to wood studs, use a stud finder to locate the center of the studs.
  • Potreban alat: Drill, level, tape measure, pencil, Phillips head screwdriver, socket wrench.
  • TV kompatibilnost: Ensure your TV's VESA pattern and weight are within the mount's specifications. This mount is compatible with Hisense Roku TV 40H4 and similar models up to 66 lbs.

3.2 Montiranje zidne ploče

  1. Position the wall plate on the desired location on the wall. Use a level to ensure it is perfectly horizontal.
  2. Mark the drilling holes with a pencil.
  3. Drill pilot holes according to the marked positions and your wall type. For wood studs, drill 5/32 inch (4mm) holes. For concrete/brick, drill 3/8 inch (10mm) holes and insert wall anchors.
  4. Attach the wall plate to the wall using the provided lag bolts and washers. Tighten securely.

3.3 Attaching the TV Plate to the Television

  1. Pažljivo postavite televizor ekranom prema dolje na meku, čistu površinu.
  2. Identifikujte VESA rupe za montažu na poleđini vašeg TV-a.
  3. Select the appropriate screws and spacers from the provided hardware kit that fit your TV's mounting holes.
  4. Attach the TV plate (the part of the mount that connects to the TV) to the back of your television. Ensure it is centered and securely fastened. Do not overtighten.

3.4 Hanging the Television

  1. Uz pomoć, pažljivo podignite televizor sa priloženom TV pločom.
  2. Align the TV plate with the articulating arms of the wall-mounted assembly.
  3. Hook the TV plate onto the arms and ensure it is securely seated.
  4. Engage any safety locking mechanisms if present on your mount to prevent accidental dislodgement.
KanexPro Full-Motion TV Wall Mount Dimensions and Articulation Diagram

Image 3.1: Technical diagram illustrating the dimensions and articulation range of the KanexPro Full-Motion TV Wall Mount. This diagram shows the mount's extension, swivel, and tilt capabilities, along with key measurements in millimeters.

4. Upravljanje nosačem

Your KanexPro Full-Motion TV Wall Mount allows for flexible positioning of your television.

  • Podešavanje okretanja: The mount allows for 90 degrees of swivel to the left and right. Gently push or pull the TV to achieve the desired viewing kut.
  • Podešavanje nagiba: The mount offers a tilt range of +20 to -20 degrees. Loosen the tilt adjustment knobs (if present), adjust the TV to the desired vertical angle, and then re-tighten the knobs to secure the position.
  • ekstenzija: The articulating arms allow the TV to be extended away from the wall for optimal viewing or retracted for a flush profile.

Always move the TV smoothly and avoid sudden, forceful movements. Ensure all cables have enough slack to accommodate the full range of motion without tension.

5. Održavanje

Redovno održavanje pomaže u osiguravanju dugotrajnosti i sigurnog rada vašeg zidnog nosača za TV.

  • čišćenje: Obrišite nosač mekom, suhom krpom. Izbjegavajte abrazivna sredstva za čišćenje ili rastvarače koji bi mogli oštetiti završnu obradu.
  • Periodične kontrole: Every 3-6 months, inspect all screws and bolts to ensure they are still tight. Re-tighten if necessary. Check for any signs of wear or damage to the mount components.
  • podmazivanje: The articulating joints are designed for smooth movement. If any stiffness occurs, a small amount of silicone-based lubricant can be applied to the pivot points.

6. Otkrivanje problema

If you encounter issues with your TV wall mount, refer to the following common problems and solutions.

ProblemMogući uzrokRješenje
TV nije ravan nakon instalacije.Wall plate or TV plate not perfectly level.Carefully remove the TV, adjust the wall plate or TV plate using a level, and re-mount.
Nosač se čini labavim ili klimavim.Mounting screws are not fully tightened or incorrect hardware used.Ensure all wall and TV mounting screws are securely tightened. Verify correct hardware for your wall type. Do not exceed weight capacity.
Difficulty adjusting tilt or swivel.Tilt knobs are too tight or joints require lubrication.Loosen tilt knobs before adjusting. Apply a small amount of silicone-based lubricant to stiff joints.
TV cables are too tight.Insufficient cable slack for full range of motion.Ensure all cables have enough slack to prevent tension when the TV is moved to its maximum extension or angle.

7. Specifikacije

  • Brand: KanexPro
  • Model: Full-Motion Tilt/Swivel TV Wall Mount
  • Vrsta montaže: Zidni nosač
  • Vrsta pokreta: Articulating, Swivel, Tilt
  • Materijal: legirani čelik
  • Boja: Crna
  • Kompatibilni uređaji: Television (e.g., Hisense Roku TV 40H4)
  • Maksimalni kapacitet težine: 66 lbs (30 kg)
  • Swivel Feature: 90 Degrees Left to Right
  • Funkcija nagiba: +20 to -20 Degrees
  • Unaprijed sastavljeno: Yes, for quick installation

8. Garancija i podrška

For warranty information or technical support, please contact KanexPro customer service directly. Refer to the product packaging or the official KanexPro webweb mjesto za kontakt detalje.

Please have your product model information and purchase date available when contacting support.

Povezani dokumenti - Full-Motion Tilt/Swivel TV Wall Mount

Preview KanexPro 2-kanalni analogni audio enkoder s Dante napajanjem i POE Korisnički priručnik
Korisnički priručnik za KanexPro AUD-DTE-ECODE, dvokanalni analogni audio enkoder s Dante napajanjem i POE. Detaljne karakteristike, specifikacije, rad i primjena npr.ampza profesionalne audio sisteme.
Preview KanexPro AP3DBL audio sa 3 ulaza AmpKorisnički priručnik za lifier
Comprehensive user manual for the KanexPro AP3DBL 3-Input 40-Watt audio amplifier. Covers features, specifications, system connection, operations, troubleshooting, and warranty.
Preview KanexPro KVM-2X1HDMI8K 2-Port 8K@60Hz HDMI KVM Switcher User Manual
User manual for the KanexPro KVM-2X1HDMI8K, a 2x1 KVM Switcher supporting 8K@60Hz resolution and USB 3.0. Includes features, specifications, operation, and ASCII commands.
Preview KanexPro HDMX88-18G: 4K UHD+ 8x8 HDMI Matrix Switcher with USB Power Outputs - User Manual
Explore the KanexPro HDMX88-18G, a professional 8x8 HDMI matrix switcher supporting 4K UHD resolutions at 60Hz. This manual details its features, operation, specifications, and control options, including RS-232, IR, and WebGUI, making it ideal for advanced AV distribution and smart home integration.
Preview KanexPro SW-2X14KUSBC: 2x1 USB-C & HDMI Auto Switcher User Manual
User manual for the KanexPro SW-2X14KUSBC, a 2x1 USB-C & HDMI Auto switcher with Video Conferencing & CEC. This guide covers product introduction, features, specifications, panel descriptions, system connections, button controls, RS232 control, troubleshooting, and customer service.
Preview KanexPro AUD-SBAR-8K HDMI 8K Soundbar Adapter w/ eARC User Manual
User manual for the KanexPro AUD-SBAR-8K HDMI 8K Soundbar Adapter with eARC. Learn about its features, specifications, connections, and operation for de-embedding audio from HDMI sources to soundbars.