1. Uvod
This manual provides essential information for the safe and efficient operation of your Intermec CN51 Mobile Computer, model CN51AN1KC00A1000. Please read this manual thoroughly before using the device to ensure proper setup, operation, and maintenance. Keep this manual for future reference.
The Intermec CN51 is a rugged mobile computer designed for demanding environments, featuring an EA30 imager for data capture and running on the Android operating system.
2. Sigurnosne informacije
Observe the following safety precautions to reduce the risk of injury, electric shock, fire, or damage to the device:
- Use only Intermec-approved accessories, batteries, and power adapters.
- Ne izlažite uređaj ekstremnim temperaturama, direktnoj sunčevoj svjetlosti ili prekomjernoj vlazi.
- Izbjegavajte ispuštanje ili izlaganje uređaja jakim udarcima.
- Ne pokušavajte rastavljati ili modificirati uređaj. Za sve servisne radove obratite se kvalificiranom osoblju.
- Odložite baterije u skladu s lokalnim propisima. Ne spaljujte baterije.
3. Sadržaj paketa
Provjerite da li vaš paket sadrži sljedeće stavke:
- Intermec CN51 Mobile Computer (CN51AN1KC00A1000)
- Punjiva baterija
- Adapter za napajanje
- USB kabel
- Vodič za brzi početak (ovaj priručnik pruža detaljne upute)
If any items are missing or damaged, contact your reseller or Intermec support immediately.
4. Device Overview
The Intermec CN51 features a robust design with a numeric keypad and an integrated EA30 imager for barcode scanning. It operates on the Android platform, providing a familiar user interface.

Slika 4.1: Front view of the Intermec CN51 Mobile Computer. This image shows the device's display, numeric keypad, and the integrated scanner window at the top.
4.1. Ključne komponente
- Prikaz: Touchscreen interface for interacting with the Android operating system.
- Numerička tastatura: For data entry and navigation.
- EA30 Imager: Integrated barcode scanner located at the top of the device.
- Dugme za napajanje: Located on the side for turning the device on/off and managing sleep mode.
- Pretinac za baterije: Nalazi se na zadnjoj strani uređaja.
- USB port: Za punjenje i prijenos podataka.
5. Podešavanje
5.1. Instaliranje baterije
- Uvjerite se da je uređaj isključen.
- Pronađite poklopac odjeljka za bateriju na stražnjoj strani uređaja.
- Remove the cover by sliding or unlatching it according to the markings.
- Insert the battery pack, ensuring the contacts align correctly.
- Vratite poklopac odeljka za baterije i pričvrstite ga.
5.2. Punjenje uređaja
Before initial use, fully charge the battery.
- Connect the USB cable to the device's USB port.
- Povežite drugi kraj USB kabla na adapter za napajanje.
- Uključite adapter za napajanje u zidnu utičnicu.
- The charging indicator will illuminate. A full charge typically takes approximately 3-4 hours.
5.3. Početno uključivanje i podešavanje Androida
- Press and hold the Power button until the Intermec logo appears.
- Follow the on-screen prompts to complete the initial Android setup, including language selection, Wi-Fi connection, and Google account setup (optional).
6. Rukovanje uređajem
6.1. Osnovna navigacija
- Touchscreen: Dodirnite za odabir, prevucite prstom za pomicanje, uštipnite za zumiranje.
- Dugme za početnu stranicu: Vraća se na početni ekran.
- Dugme za povratak: Vraća se na prethodni ekran.
- Dugme za nedavne aplikacije: Prikazuje nedavno korištene aplikacije.
- Tastatura: Use the numeric keys for data input and function keys for specific operations as configured by your application.
6.2. Using the EA30 Imager (Barcode Scanner)
The integrated EA30 imager allows for rapid and accurate barcode scanning.
- Otvorite aplikaciju koja podržava skeniranje barkodova.
- Point the top of the device, where the imager window is located, at the barcode.
- Press the scan trigger button (typically located on the side of the device or a dedicated key on the keypad).
- Ensure the red aiming beam or illumination pattern covers the entire barcode.
- The device will emit a beep or vibrate to indicate a successful scan.
6.3. Povezivanje na Wi-Fi
- Idi na Postavke > Mreža i internet > Wi-Fi.
- Uključi/isključi Wi-Fi On.
- Odaberite željenu mrežu s popisa.
- Unesite mrežnu lozinku ako se to od vas zatraži i dodirnite Povežite se.
7. Održavanje
7.1. Čišćenje uređaja
- Isključite uređaj prije čišćenja.
- Koristite meku krpu koja ne ostavlja dlačice dampened with water or a mild cleaning solution (e.g., isopropyl alcohol) to wipe the exterior.
- Ne koristite abrazivna sredstva za čišćenje niti uranjajte uređaj u tekućine.
- Gently clean the scanner window with a soft, dry cloth to ensure optimal scanning performance.
7.2. Održavanje baterije
- Izbjegavajte često potpuno pražnjenje baterije.
- Uređaj i baterije čuvajte na hladnom i suhom mjestu kada ih ne koristite duži period.
- Replace batteries that show signs of damage or significantly reduced performance.
7.3. Ažuriranja softvera
Regularly check for and install software updates to ensure optimal performance, security, and access to new features. Updates can typically be found under Postavke > Sistem > Ažuriranje sistema.
8. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Uređaj se ne uključuje. | Baterija je prazna ili nije pravilno instalirana. | Napunite bateriju. Provjerite da li je baterija pravilno postavljena u svoj odjeljak. |
| Nije moguće skenirati barkodove. | Imager window is dirty; barcode is damaged or out of range; scanning application not active. | Clean the imager window. Ensure the barcode is within the scanner's optimal range. Verify the scanning application is open and ready. |
| Problemi s Wi-Fi vezom. | Netačna lozinka; van dometa; problem s mrežom. | Re-enter Wi-Fi password. Move closer to the access point. Restart the device and/or router. |
| Uređaj ne reaguje. | Softverski kvar. | Perform a soft reset by holding the power button for 10-15 seconds until the device restarts. |
If problems persist, contact Intermec technical support or your authorized service provider.
9. Specifikacije
| Feature | Detalj |
|---|---|
| Broj modela | CN51AN1KC00A1000 |
| Brand | Intermec |
| Operativni sistem | Android |
| Tip skenera | EA30 Imager |
| Kamera | Nema |
| Dimenzije proizvoda | 2.91 x 1.1 x 6.46 inča |
| Težina artikla | 12.3 unce |
| Datum prve dostupnosti | 16. aprila 2015 |
10. Garancija i podrška
Intermec products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Intermec weblokacija. Garantni periodi mogu varirati ovisno o regiji i vrsti proizvoda.
For technical assistance, troubleshooting, or service inquiries, please contact your authorized Intermec reseller or visit the Intermec support portal. Ensure you have your device's model number (CN51AN1KC00A1000) and serial number available when contacting support.
Online podrška: www.intermec.com/support (This is a placeholder link as no specific support URL was provided in the input. Users should replace with actual link if available.)





