Priručnici+

Generac 0J93230SSM

Generac 0J93230SSM Maintenance Kit for 20-22kW Generators - Instruction Manual

Uvod

This manual provides essential instructions for the Generac 0J93230SSM Maintenance Kit, designed to facilitate routine upkeep for Generac 20kW to 22kW generators. Regular maintenance using genuine Generac parts is crucial for ensuring the longevity and reliable performance of your generator. This kit includes all necessary components for a standard service interval.

The kit contains genuine OEM Generac parts, specifically chosen to fit Generac engine models requiring this part number.

Komplet komponenti je završenview

The Generac 0J93230SSM Maintenance Kit includes the following items:

  • Two (2) Quarts of SAE 5W-30 Full Synthetic Engine Oil
  • One (1) Air Filter
  • One (1) Oil Filter (Part #: 070185E)
  • Two (2) Spark Plugs
  • One (1) Service Sticker
Two black bottles of Generac SAE 5W-30 Full Synthetic Engine Oil
Two quarts of Generac SAE 5W-30 Full Synthetic Engine Oil.
Generac air filter, rectangular with yellow pleated filter material and orange frame, showing dimensions 5 inches by 9 1/4 inches
Generac air filter with approximate dimensions of 5 inches by 9 1/4 inches.
Generac oil filter, orange cylindrical canister with 'GENUINE PARTS' and 'Part #: 070185E' labels, showing dimensions 2 3/4 inches diameter by 3 1/2 inches height
Generac oil filter, Part #: 070185E, with approximate dimensions of 2 3/4 inches diameter by 3 1/2 inches height.
Two Generac spark plugs, showing detailed view of the ceramic insulator and threaded metal body, with one plug showing dimensions 5/8 inch hex and 3 inches total length
Two Generac spark plugs, each approximately 3 inches in total length with a 5/8 inch hex size.

Procedure održavanja

Regular maintenance is vital for the optimal performance and longevity of your Generac generator. Always refer to your generator's specific owner's manual for detailed safety precautions and procedures.

1. Zamjena motornog ulja

The kit includes two quarts of SAE 5W-30 full synthetic engine oil. This oil is formulated for optimal performance in various temperatures.

  1. Uvjerite se da je generator isključen i ohlađen.
  2. Locate the oil drain plug and place a suitable container underneath to collect used oil.
  3. Remove the drain plug and the oil fill cap/dipstick. Allow all old oil to drain completely.
  4. Čvrsto vratite čep za odvod.
  5. Carefully pour the new SAE 5W-30 synthetic engine oil into the oil fill opening. Refer to your generator's manual for the exact oil capacity.
  6. Check the oil level with the dipstick, ensuring it is within the recommended range.
  7. Zamijenite čep za punjenje ulja/mjernu šipku.

2. Zamjena filtera za ulje

The kit includes one Generac oil filter (Part #: 070185E).

  1. After draining the old engine oil, locate the oil filter.
  2. Use an oil filter wrench to loosen and remove the old oil filter. Be prepared for some oil spillage.
  3. Apply a thin film of new engine oil to the rubber gasket of the new oil filter.
  4. Screw on the new oil filter by hand until the gasket makes contact with the engine block. Then, tighten an additional 1/2 to 3/4 turn. Do not overtighten.
  5. After refilling the engine oil, run the generator for a few minutes and check for leaks around the oil filter.

3. Zamjena zračnog filtera

The kit includes one air filter. A clean air filter ensures proper engine breathing and prevents contaminants from entering the engine.

  1. Pronađite kućište filtera za zrak na vašem generatoru.
  2. Open the housing by releasing the clips or screws.
  3. Remove the old air filter. Note its orientation.
  4. Očistite sve ostatke iz unutrašnjosti kućišta filtera za zrak.
  5. Insert the new air filter, ensuring it is seated correctly.
  6. Zatvorite i pričvrstite kućište filtera za zrak.

4. Zamjena svjećice

The kit includes two spark plugs. Replacing spark plugs ensures efficient ignition and optimal engine performance.

  1. Ensure the generator is off and cooled. Disconnect the spark plug wires.
  2. Koristite ključ za svjećice da pažljivo uklonite stare svjećice.
  3. Provjerite nove svjećice da li imaju ispravan zazor (za specifikacije pogledajte priručnik za vaš generator). Podesite ako je potrebno.
  4. Thread the new spark plugs into the cylinder head by hand to prevent cross-threading.
  5. Tighten with a spark plug wrench. Do not overtighten; typically, a quarter to half turn after hand-tight is sufficient.
  6. Čvrsto ponovo spojite žice svjećice.

5. Service Sticker

Use the included service sticker to record the date and hours of this maintenance service. This helps track future maintenance intervals.

Video snimci proizvoda

Video: Generac 0J93230SSM Maintenance Kit Overview. This short video provides a visual introduction to the components included in the Generac 0J93230SSM Maintenance Kit, showcasing the synthetic oil, air filter, oil filter, and spark plugs.
Video: Generac Product Overview. Ovaj video nudi opći pregledview of Generac products, highlighting their features and benefits. While not specific to the maintenance kit, it provides context on the brand's commitment to quality and generator performance.

Specifikacije

FeatureDetalj
BrandGenerac
Naziv modela0J93230SSM
Preporučeno zaGenerac 20kW-22kW Generators
Uključene komponente2 Quarts of 5W-30 Synthetic Motor Oil, 1 Air Filter, 1 Oil Filter, 2 Spark Plugs, 1 Service Sticker
Težina artikla2.76 funti (otprilike)
Dimenzije proizvoda27.94 x 27.94 x 27.94 inches (approx. package dimensions)
MaterijalPlastic (for some components)
Posebna karakteristikaMaintenance kit, Tune up kit

Garancija i podrška

For specific warranty information regarding the Generac 0J93230SSM Maintenance Kit or its individual components, please refer to the documentation included with your purchase or visit the official Generac website.

For technical support, troubleshooting assistance, or to locate authorized service centers, please contact Generac customer service directly or consult your generator's owner's manual.