Zebra ZT220 Direct Thermal/Termo Transfer Printer Korisnički priručnik

1. Uvod

The Zebra ZT220 is a robust and reliable direct thermal and thermal transfer printer designed for various label printing applications. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your ZT220 printer to ensure optimal performance and longevity.

Key features include a 4.09-inch print width, 203 dpi resolution, and connectivity options such as USB and Serial. It supports both direct thermal printing (no ribbon required) and thermal transfer printing (requires ribbon) for versatile media compatibility.

2. Sigurnosne informacije

Please read and understand all safety instructions before operating the printer. Failure to follow these instructions may result in injury or damage to the printer.

• Izvor napajanja: Use only the power supply provided with the printer. Ensure the power outlet is properly grounded.
• ventilacija: Do not block ventilation openings. Ensure adequate airflow around the printer.
• Okruženje: Operate the printer in a clean, dry environment, away from direct sunlight, excessive heat, and moisture.
• Vruće površine: The printhead can become very hot during operation. Avoid touching it immediately after printing.
• Pokretni dijelovi: Držite ruke i labavu odjeću dalje od pokretnih dijelova tokom rada.
• čišćenje: Disconnect power before cleaning the printer. Use a soft, damp krpom; izbjegavajte abrazivna sredstva za čišćenje ili rastvarače.

3. Sadržaj paketa

Verify that all items are present in the printer package:

• Zebra ZT220 Printer
• Kabl za napajanje
• USB kabel
• Vodič za brzi početak
• Documentation CD (may contain drivers and full user manual)

4. Fizičke karakteristike i komponente

Familiarize yourself with the main components of your Zebra ZT220 printer.

Slika 4.1: Prednje desno view of the Zebra ZT220 printer with a label roll loaded. The image shows the control panel on the left, the main body of the printer, and the media compartment on the right with a label exiting the print mechanism.

4.1 Kontrolna tabla

• Dugme za napajanje: Uključuje ili isključuje štampač.
• Dugme za unos: Advances one label.
• Dugme za pauzu: Pauzira ili nastavlja štampanje.
• Dugme za odustajanje: Otkazuje trenutni zadatak štampanja.
• Indikatori statusa: LEDs to show printer status (e.g., Ready, Error, Data).

4.2 Priključci stražnje ploče

• Napajanje: Povezuje kabl za napajanje.
• USB port: Connects to a computer for data transfer.
• Serijski port: Connects to a computer or other device via serial cable.

5. Podešavanje

5.1 Instalacija hardvera

1. plasman: Place the printer on a stable, flat surface with adequate space for media loading and output.
2. Priključite napajanje: Connect the power cord to the printer's power port and then to a grounded electrical outlet. Do not power on yet.
3. Spojite podatkovni kabel: Connect the USB cable from the printer's USB port to an available USB port on your computer, or connect a serial cable to the serial port.

5.2 Učitavanje medija (etiketa)

1. Open the printer's media cover.
2. Place the roll of labels onto the media supply hanger. Ensure the labels feed from the bottom of the roll.
3. Thread the labels through the media guides. Adjust the guides to fit the width of your labels snugly but without binding.
4. Pull the leading edge of the labels past the printhead and out through the front slot.
5. Zatvorite poklopac medija.

5.3 Loading Ribbon (for Thermal Transfer Printing)

If you are performing direct thermal printing, you can skip this step.

1. Open the printer's media cover.
2. Place the ribbon roll onto the supply spindle, ensuring the ribbon unwinds from the top.
3. Attach the leading edge of the ribbon to the take-up spindle.
4. Rotate the take-up spindle clockwise a few turns to ensure the ribbon is taut and aligned.
5. Zatvorite poklopac medija.

5.4 Instalacija drajvera

1. Uključeno: Pritisnite dugme za napajanje na štampaču.
2. Instalirajte drajvere: Insert the documentation CD into your computer's CD-ROM drive and follow the on-screen instructions to install the printer drivers. Alternatively, download the latest drivers from the official Zebra website.
3. Slijedite upute: During installation, your operating system may detect the new hardware and prompt you to install drivers. Follow these prompts.
4. Provjerite instalaciju: After installation, check your computer's "Devices and Printers" (Windows) or "Printers & Scanners" (macOS) to ensure the Zebra ZT220 is listed and ready.

6. Upravljanje štampačem

6.1 Osnovno štampanje

1. Provjerite da li je štampač uključen i povezan sa računarom.
2. Load the appropriate media and ribbon (if using thermal transfer).
3. Otvorite dokument ili aplikaciju iz koje želite da štampate.
4. Iz menija aplikacije odaberite "Štampaj".
5. Choose the "Zebra ZT220" printer from the list of available printers.
6. Adjust print settings (e.g., label size, print darkness, print speed) as needed in the printer preferences.
7. Kliknite na "Štampaj" da biste poslali zadatak na štampač.

6.2 Calibrating the Printer

Calibration ensures accurate label sensing and print registration. Refer to the full user manual or Zebra's support website for detailed calibration procedures, which often involve specific button sequences on the control panel or software utilities.

7. Održavanje

7.1 Cleaning the Printhead

Regular cleaning of the printhead is crucial for maintaining print quality and extending printhead life. Clean the printhead after every few rolls of labels or if print quality degrades.

1. Isključite štampač i iskopčajte kabl za napajanje.
2. Otvorite poklopac medija.
3. Using a Zebra printhead cleaning pen or a cotton swab lightly moistened with 99.9% isopropyl alcohol, gently wipe across the dark line of the printhead from center to edge.
4. Allow the printhead to dry completely (approximately 1 minute) before closing the cover and reconnecting power.

7.2 Čišćenje valjka za štampu

The platen roller helps feed the media. Clean it periodically to prevent media jams and ensure smooth operation.

1. Isključite štampač i iskopčajte kabl za napajanje.
2. Otvorite poklopac medija.
3. Using a lint-free cloth lightly moistened with 99.9% isopropyl alcohol, wipe the surface of the platen roller while rotating it.
4. Allow it to dry completely before closing the cover and reconnecting power.

8. Otkrivanje problema

This section addresses common issues you might encounter with your ZT220 printer.

9. Specifikacije

Below are the technical specifications for the Zebra ZT220 printer:

• Način štampanja: Direktni termalni / termalni transfer
• Rezolucija štampanja: 203 dpi (tačke po inču)
• Maksimalna širina ispisa: 4.09 inča (104 mm)
• Maksimalna brzina ispisa: 6 inča u sekundi (152 mm/s)
• Povezivanje: USB, serijski
• Izlaz štampača: Monochrome
• Težina artikla: 22.8 funte (10.34 kg)
• Kompatibilni uređaji: PC
• Proizvođač: O.E.M. (Zebra)
• Prvo dostupno: 25. marta 2015

10. Informacije o garanciji

Warranty terms and conditions for the Zebra ZT220 printer are typically provided with the product at the time of purchase or can be found on the official Zebra website. Please refer to your purchase documentation or the manufacturer's website for specific warranty details, coverage periods, and claim procedures.

11. Podrška

For further assistance, technical support, or to download the latest drivers and firmware, please visit the official Zebra support website. You may also find additional resources, FAQs, and contact information for customer service there.

Zebra Technologies Official Webstranica: www.zebra.com