1. Uvod
Thank you for choosing the BLACK+DECKER PS7525-QS 800W 25cm Pole Saw. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new tool. Please read these instructions carefully before use and keep them for future reference.
This pole saw is designed for pruning and trimming branches in domestic garden environments. It is not intended for professional or commercial use.
2. Opće sigurnosne informacije
Always wear appropriate personal protective equipment (PPE) including safety glasses, gloves, hearing protection, and a hard hat when operating the pole saw. Ensure the work area is clear of bystanders, children, and pets. Do not operate the tool in wet conditions or near power lines. Always disconnect the power supply before performing any maintenance or adjustments.
For detailed safety guidelines, refer to the safety section of the full product manual available on the BLACK+DECKER website.
3. Proizvod je gotovview
The BLACK+DECKER PS7525-QS is an 800W electric pole saw featuring a 25cm cutting capacity and an adjustable pole for extended reach. Key features include an automatic chain lubrication system and an easy-fill oil tank.
Slika 1: The BLACK+DECKER PS7525-QS 800W 25cm Pole Saw. This image shows the complete pole saw assembly, highlighting the motor unit, cutting bar, chain, and the adjustable pole.
Ključne karakteristike:
- Kapacitet rezanja: Up to 25cm for efficient branch trimming.
- Podesivi stub: Extends up to 2.7m to reach higher branches safely from the ground.
- Automatsko podmazivanje lanca: Ensures continuous and efficient cutting performance.
- Easy-Fill Oil Tank: Simplifies the process of refilling chain oil.
- okretna glava: Allows for easy access and improved cutting angles in difficult-to-reach areas.
4. Postavljanje i montaža
Before assembly, ensure all components are present and undamaged. Refer to the parts list in your full manual for a complete overview.
4.1 Attaching the Bar and Chain
- Postavite lanac oko lančanika i vodilice.
- Mount the guide bar and chain onto the motor unit, ensuring the chain is correctly seated in the guide bar groove.
- Secure the cover and tighten the retaining nuts, leaving them slightly loose for chain tension adjustment.
4.2 Filling the Chain Oil Tank
The pole saw features an automatic chain lubrication system. It is crucial to fill the oil tank with appropriate chain lubricant before each use.
- Odvrnite poklopac rezervoara za ulje.
- Fill the tank with high-quality chain and bar oil, avoiding overfilling.
- Čvrsto vratite čep rezervoara za ulje.
4.3 Podešavanje zategnutosti lanca
Proper chain tension is vital for safe and efficient operation. The chain should be snug against the guide bar but still able to be pulled freely by hand.
- With the retaining nuts slightly loose, use the tensioning screw to adjust the chain tension.
- Once the correct tension is achieved, fully tighten the retaining nuts.
5. Uputstvo za upotrebu
Always ensure you are wearing appropriate PPE and that the work area is clear before starting the pole saw.
5.1 Produžavanje štapa
The pole can be adjusted to the desired length for reaching various branch heights. Loosen the locking mechanism, extend the pole to the required length, and securely tighten the locking mechanism.
Slika 2: Operating the pole saw with the pole extended. This image demonstrates the user holding the pole saw at an extended length to reach higher branches, emphasizing the tool's reach capability.
5.2 Pokretanje i zaustavljanje
To start the pole saw, press the safety lock-off button and then squeeze the trigger switch. To stop, release the trigger switch.
5.3 Tehnike rezanja
Always maintain a firm grip on the pole saw with both hands. Position yourself securely and ensure the branch to be cut is stable. Avoid cutting branches thicker than the recommended capacity (25cm).
- Prvo podrezivanje: For larger branches, make a small undercut on the underside of the branch to prevent bark stripping.
- Gornji rez: Make the main cut from the top, slightly further out from the undercut.
- Final Cut: Remove the stub close to the main trunk or limb.
Slika 3: User pruning high branches. This image shows a user safely operating the pole saw to trim branches high in a tree, demonstrating the tool's effectiveness for elevated tasks.
Slika 4: User operating the pole saw from a lower angle. This image provides another perspective of the pole saw in use, highlighting its maneuverability and the user's control during pruning operations.
Always be aware of falling branches and ensure a clear escape path. Do not stand directly under the branch being cut.
6. Održavanje
Regular maintenance ensures the longevity and safe operation of your pole saw. Always disconnect the power supply before performing any maintenance.
6.1 Podmazivanje lanca
The automatic lubrication system requires regular refilling of the oil tank. Check the oil level before each use and refill as necessary.
6.2 Chain Tension
Check chain tension frequently, especially during initial use. A loose chain can derail, and a too-tight chain can cause excessive wear and damage. Adjust as described in Section 4.3.
6.3 Čišćenje i skladištenje
After each use, clean the pole saw thoroughly. Remove sawdust and debris from the motor unit, guide bar, and chain. Store the tool in a dry, secure location, out of reach of children.
7. Otkrivanje problema
If you encounter issues with your pole saw, refer to the following common problems and solutions:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Testera se ne pokreće | No power supply; Safety lock-off not engaged; Faulty switch | Check power connection; Ensure safety lock-off is pressed before trigger; Contact service center |
| Lanac ne reže efikasno | Dull chain; Incorrect chain tension; Insufficient lubrication | Sharpen or replace chain; Adjust chain tension; Refill oil tank |
| Chain derails | Loose chain tension; Worn guide bar or chain | Adjust chain tension; Inspect and replace worn parts |
| Ulje se ne toči | Empty oil tank; Clogged oil port | Refill oil tank; Clean oil port |
If the problem persists, contact BLACK+DECKER customer support.
8. Specifikacije
| Specifikacija | Detalj |
|---|---|
| Brand | BLACK+DECKER |
| Model | PS7525-QS |
| Izvor napajanja | Corded Electric |
| Snaga | 800W |
| Težina artikla | 3.8 kg |
| Dimenzije proizvoda | 91.6D x 11.6Š x 21.6V cm |
| Dužina lanca | 25 cm |
| GTIN | 05035048554081 |
| Proizvođač | BLACK+DECKER |
9. Informacije o garanciji
BLACK+DECKER products are manufactured to high-quality standards and are guaranteed against manufacturing defects. The specific warranty period and terms may vary by region and product. Please retain your proof of purchase. For detailed warranty information, refer to the warranty card included with your product or visit the official BLACK+DECKER website.
10. Korisnička podrška
For technical assistance, spare parts, or service, please contact your local BLACK+DECKER service center. You can find contact information on the official BLACK+DECKER webweb-mjestu ili u dokumentaciji koja se isporučuje s vašim proizvodom.
Webstranica: www.blackanddecker.com
