AUTONICS BX700-DDT Uputstvo za upotrebu fotoelektričnog senzora

1. Uvod

This instruction manual provides essential information for the safe and effective use of the AUTONICS BX700-DDT Photoelectric Sensor. Please read this manual thoroughly before installation and operation to ensure proper functionality and to prevent potential hazards. Keep this manual in a safe place for future reference.

2. Sigurnosne mjere

Observe all safety warnings and instructions to prevent electric shock, fire, or product damage.

• Ensure the power supply is disconnected before wiring, installation, or maintenance.
• Ne koristite ovaj uređaj u okruženjima sa zapaljivim ili eksplozivnim plinovima.
• Proverite voltage je unutar specificiranog opsega (12-24 VDC).
• Avoid installing the sensor in locations subject to direct sunlight, strong vibrations, or excessive dust and moisture.
• Nemojte rastavljati niti modificirati jedinicu.

3. Proizvod je gotovview

The AUTONICS BX700-DDT is a diffuse reflective photoelectric sensor designed for reliable object detection. It operates by emitting light and detecting the reflected light from the target object. This model features a 700mm sensing distance and offers both NPN and PNP output types with selectable Light ON/Dark ON operation.

Slika 1: Prednja i bočna strana view of two AUTONICS BX700-DDT sensors. These sensors are compact, black, and feature connection terminals on one side.

Slika 2: Detaljno view of the AUTONICS BX700-DDT sensor's label, indicating the model number, output specifications (NPN/PNP), and power input (12-24VDC). It also shows the 'OUT' and 'STAB' indicators and adjustment buttons.

4. Specifikacije

5. Instalacija i podešavanje

5.1 Montaža

Mount the sensor securely using appropriate brackets and fasteners. Ensure the sensing surface is clear of obstructions and positioned correctly relative to the target object. Avoid mounting the sensor where it may be exposed to excessive vibration or impact.

5.2 Razmatranja životne sredine

• temperatura: Operate within the specified temperature range to ensure optimal performance.
• Vlažnost: Avoid environments with high humidity or condensation.
• Light Interference: Minimize exposure to strong ambient light sources, such as direct sunlight or high-intensity lamps, which can interfere with sensing.
• Prašina i prljavština: Keep the sensing surface clean to maintain reliable detection.

6. Ožičenje

Proper wiring is crucial for the sensor's functionality and safety. Refer to the wiring diagram typically found on the product label or in the full technical datasheet. The BX700-DDT supports both NPN and PNP output configurations.

General Wiring Guide:

• smeđa žica: Connect to +VDC (12-24 VDC).
• Plava žica: Connect to 0V / GND.
• crna žica: NPN Output.
• Bijela žica: PNP Output.

Važno: Osigurajte ispravan polaritet i jačinu zvukatage. Incorrect wiring can damage the sensor or connected equipment. Always disconnect power before making or changing wiring connections.

7. Operacija

7.1 Uključivanje

After completing installation and wiring, apply power to the sensor. The power indicator (if present) should illuminate.

7.2 Light ON / Dark ON Selection

The BX700-DDT allows selection between Light ON and Dark ON operation modes. This selection is typically made via a switch or button on the sensor body. Refer to Figure 2 for potential switch locations.

• Light ON (NO - Normally Open): The output turns ON when light is received (object detected).
• Dark ON (NC - Normally Closed): The output turns ON when light is NOT received (no object detected, or object blocks light).

7.3 Podešavanje osjetljivosti

For diffuse reflective sensors, sensitivity adjustment may be necessary to optimize detection for specific target objects and distances. This is often done via a potentiometer or push-button on the sensor. Adjust the sensitivity while observing the output indicator (OUT) to ensure reliable detection of the target and non-detection of background objects.

8. Održavanje

Regular maintenance ensures consistent performance and extends the lifespan of your sensor.

• čišćenje: Periodically clean the sensing surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• inspekcija: Check wiring connections for looseness or damage. Inspect the sensor body for any physical damage.
• Provjera okoliša: Ensure the operating environment remains within specified conditions (temperature, humidity, dust).

9. Otkrivanje problema

10. Garancija i podrška

This AUTONICS BX700-DDT sensor comes with a 1 godine garancije od datuma kupovine, pokrivajući proizvodne nedostatke. Molimo sačuvajte dokaz o kupovini za reklamacije u slučaju garancije.

For technical support, service, or warranty inquiries, please contact your authorized AUTONICS distributor or the seller. Do not attempt to repair the unit yourself, as this may void the warranty.