1. Uvod
Thank you for choosing the Deca Parva 145E Welding Machine. This manual provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your new welding equipment. Please read this manual thoroughly before using the machine and keep it for future reference.
The Deca Parva 145E is designed for various welding tasks, offering reliable performance for both hobbyists and professionals. Proper understanding and adherence to these instructions will ensure optimal results and prolong the life of your machine.
2. Sigurnosna uputstva
UPOZORENJE: Zavarivanje može biti opasno. Uvijek slijedite sigurnosne mjere kako biste spriječili ozbiljne ozljede ili smrt.
- Električni šok: Welding current can cause fatal electric shock. Ensure proper grounding. Do not touch live electrical parts. Wear dry, insulated gloves.
- Isparenja i gasovi: Welding fumes and gases can be hazardous to your health. Work in a well-ventilated area. Use a fume extractor if necessary.
- lučni zraci: Arc rays can burn eyes and skin. Wear a welding helmet with appropriate shade filter and protective clothing.
- Požar i eksplozija: Iskre zavarivanja i vrući metal mogu uzrokovati požar ili eksplozije. Zapaljive materijale držite dalje od područja zavarivanja. Imajte aparat za gašenje požara lako dostupan.
- Opekline: Vrući metal i troska mogu izazvati teške opekotine. Nosite zaštitne rukavice i odjeću.
- Pace Makers: Persons with pacemakers should consult their doctor before operating this equipment.
- Uvijek isključite napajanje prije izvođenja bilo kakvog održavanja ili servisiranja.
3. Sadržaj paketa
Pažljivo raspakujte kutiju i provjerite da li su svi predmeti prisutni i neoštećeni. Ako bilo koji predmet nedostaje ili je oštećen, odmah se obratite prodavaču.
- Deca Parva 145E Welding Machine
- Electrode Holder with Cable
- Prizemlje Clamp sa kablom
- Welding Mask (Handheld)
- Chipping Hammer / Wire Brush
- Uputstvo za upotrebu
4. Proizvod je gotovview
The Deca Parva 145E is a compact and robust welding machine designed for various arc welding applications. Below is an image illustrating the main unit and its included accessories.
Slika 1: Deca Parva 145E Welding Machine and included accessories. The image displays the yellow main welding unit, a black handheld welding mask, a black chipping hammer with a wire brush, an electrode holder, and a ground clamp.
Ključne komponente:
- Glavna jedinica: Žuto casing with control panel.
- Prekidač: On/Off kontrola.
- Dugme za podešavanje struje: For stepless welding current regulation.
- Thermal Protection Indicator: Illuminates when the machine overheats.
- Izlazni priključci: Connections for electrode holder and ground clamp.
- Electrode Holder: Secures the welding electrode.
- Prizemlje Clamp: Spaja se na radni komad kako bi se zatvorio električni krug.
- Maska za zavarivanje: Provides eye and face protection from arc rays and sparks.
- Chipping Hammer/Wire Brush: Used for removing slag and cleaning welds.
5. Podešavanje
- plasman: Place the welding machine on a stable, level surface in a well-ventilated area, away from flammable materials. Ensure adequate space around the machine for air circulation.
- Priključak za napajanje: Connect the machine's power cord to a suitable grounded electrical outlet. Ensure the power supply matches the machine's requirements (refer to specifications).
- Spoji uzemljenje Clamp: Pričvrstite uzemljenje clamp cable to the appropriate output terminal on the welding machine. Securely attach the ground clamp na radni komad ili sto za zavarivanje, osiguravajući dobar električni kontakt.
- Spojite držač elektrode: Attach the electrode holder cable to the other output terminal on the welding machine. Insert a suitable electrode into the electrode holder. The recommended electrode size for this machine is 1.6mm to 3.2mm.
- Lična zaštitna oprema (PPE): Before turning on the machine, ensure you are wearing all necessary PPE, including a welding helmet, welding gloves, and protective clothing.
6. Uputstvo za upotrebu
- Uključi: Switch the main power switch to the "ON" position.
- Podešena struja zavarivanja: Adjust the current adjustment knob to the desired welding current. The appropriate current setting depends on the electrode diameter and the material thickness being welded. Start with a lower setting and increase as needed.
- Pripremite radni komad: Ensure the workpiece is clean and free of rust, paint, or grease to ensure a good weld.
- Strike an Arc: While wearing your welding helmet, gently tap or scratch the electrode against the workpiece to strike an arc. Once the arc is established, maintain a consistent arc length and travel speed.
- zavarivanje: Move the electrode along the joint, maintaining a steady hand and angle. Observe the weld pool and adjust your technique as necessary.
- Termička zaštita: If the thermal protection indicator illuminates, the machine has overheated. Turn off the machine and allow it to cool down before resuming operation. Do not bypass this safety feature.
- Finish Welding: When finished, lift the electrode from the workpiece to break the arc. Turn off the welding machine.
- Post-Weld Cleaning: Use the chipping hammer to remove slag from the weld bead, then use the wire brush to clean the weld.
7. Održavanje
Redovno održavanje osigurava dugotrajnost i siguran rad vašeg aparata za zavarivanje.
- čišćenje: Periodically clean the machine's exterior with a dry cloth. Use compressed air to blow out dust and debris from the ventilation openings. Ensure the machine is unplugged before cleaning.
- Inspekcija kablova: Regularly inspect all cables (power, electrode, ground) for cuts, fraying, or damage. Replace damaged cables immediately.
- Priključci terminala: Ensure all terminal connections are tight and free of corrosion.
- Skladištenje: Store the welding machine in a dry, clean environment, away from moisture and extreme temperatures.
- Electrode Holder and Ground Clamp: Keep these accessories clean and in good working condition. Replace if damaged.
8. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Nema napajanja mašine. | Power cord unplugged, faulty outlet, tripped circuit breaker. | Check power connection, test outlet, reset circuit breaker. |
| Machine turns on but no arc. | Poor ground connection, incorrect current setting, faulty electrode holder/cable, wet electrode. | Osigurajte uzemljenjeamp is securely attached to clean metal. Adjust current. Inspect cables and holder. Use dry electrodes. |
| Thermal protection light is on. | Machine overheated due to prolonged use or insufficient ventilation. | Turn off the machine and allow it to cool down. Ensure proper ventilation. Reduce duty cycle. |
| Poor weld quality (e.g., porosity, lack of penetration). | Incorrect current, improper arc length, wrong electrode, dirty workpiece, incorrect travel speed. | Adjust current, maintain proper arc length, use correct electrode for material, clean workpiece, adjust travel speed. |
Ako naiđete na probleme koji nisu ovdje navedeni ili ako predložena rješenja ne riješe problem, obratite se korisničkoj podršci.
9. Specifikacije
| Feature | Detalj |
|---|---|
| Brand | Deca |
| Naziv modela | Parva 145E |
| Broj dijela | 0400193 |
| Broj modela stavke | 322006 |
| Struja zavarivanja | Beskonačno podešavanje |
| Electrode Diameter Range | 1.6 mm - 3.2 mm |
| Vrsta izvora napajanja | Električna energija (AC) |
| Dimenzije proizvoda | 390 x 210 x 280 mm (from description) / 24.99 x 16.99 x 29.49 cm (from specifications) |
| Težina artikla | 14.5 kg (from description) / 14.3 kg (from specifications) |
| Proizvođač | DECA |
| Datum prve dostupnosti | 17 septembar 2015 |
Napomena: Specifikacije se mogu promijeniti bez prethodne najave radi poboljšanja proizvoda.
10. Garancija i podrška
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Deca products are manufactured to high-quality standards, and support is available for any operational issues or technical inquiries.
If you require technical assistance or have questions regarding your Deca Parva 145E Welding Machine, please contact the authorized Deca service center or your point of purchase. When contacting support, please have your model number (0400193 / 322006) and purchase date available.
