Progress Lighting Helm Collection One-Light 11" LED Flush Mount Instruction Manual

Uvod

The Progress Lighting Helm Collection One-Light 11" LED Flush Mount fixture is a contemporary lighting solution designed for both ceiling and wall mounting. Featuring an acrylic diffuser with architectural details, this fixture provides efficient and stylish illumination. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new light fixture.

Važne informacije o sigurnosti

Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be fatal or cause serious damage. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). If you are unfamiliar with electrical wiring, consult a qualified electrician.

• Uvijek isključite napajanje na glavnom prekidaču prije instalacije ili održavanja.
• Ne instalirajte ovaj uređaj na vlažnim mjestima. Namijenjen je samo za upotrebu u zatvorenom prostoru.
• Uvjerite se da su svi priključci sigurni i pravilno izolirani.
• This fixture is designed for 120 Volts AC.
• Ne pokušavajte modificirati uređaj. Bilo kakve modifikacije mogu poništiti garanciju i stvoriti sigurnosni rizik.
• LED izvor svjetlosti je integriran i korisnik ga ne može zamijeniti.

Sadržaj paketa

Prije početka instalacije provjerite da li su sve komponente prisutne:

• Helm Collection LED Flush Mount Fixture (1)
• Komplet hardvera za montažu (1)
• Installation Sheet (1)

Postavljanje i instalacija

Follow these steps carefully to install your new fixture. It is recommended to have two people for installation.

Korak 1: Pripremite se za instalaciju

1. Isključite napajanje na prekidaču ili razvodnoj kutiji kako biste izbjegli strujni udar.
2. Remove the old fixture (if applicable) and disconnect all wiring.
3. Unpack the new fixture and its components. Keep all parts organized.

Korak 2: Montirajte uređaj

Slika: Front view of the 11-inch LED flush mount fixture in a brushed nickel finish, showcasing its square design and acrylic diffuser.

Image: Diagram showing the dimensions of the fixture, indicating an 11-inch width and 3-3/4 inch height.

4. Pričvrstite nosač za montažu na razvodnu kutiju pomoću priloženih vijaka. Provjerite da li je sigurno pričvršćen.
5. Connect the fixture's wires to the corresponding house wires:
   • Connect the black wire (Live) from the fixture to the black wire from the junction box.
   • Connect the white wire (Neutral) from the fixture to the white wire from the junction box.
   • Connect the green or bare copper wire (Ground) from the fixture to the green or bare copper wire from the junction box.
   Use wire nuts to secure all connections and wrap them with electrical tape for added safety.
6. Pažljivo ugurajte sve žice u razvodnu kutiju.
7. Align the fixture with the mounting bracket and secure it using the provided screws. Ensure the fixture is flush against the ceiling or wall.

Korak 3: Završite instalaciju

8. Obnovite napajanje na glavnom prekidaču.
9. Testirajte uređaj kako biste bili sigurni da radi ispravno.

Uputstvo za upotrebu

This LED flush mount fixture is designed for simple operation.

• Uključivanje/isključivanje: Use a standard wall switch connected to the fixture's circuit to turn the light on or off.
• Dimming: This fixture is compatible with most standard dimmer switches. For optimal performance and to avoid flickering, use an LED-compatible dimmer switch. Consult your dimmer switch manufacturer's instructions for proper installation and operation.

Održavanje

To ensure the longevity and appearance of your fixture, follow these maintenance guidelines:

• čišćenje: Always turn off the power and allow the fixture to cool before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or acrylic diffuser.
• LED izvor svjetla: The LED light source in this fixture is integrated and designed for long-term use. It is not user-replaceable. If the LED light source fails, the entire fixture may need to be replaced.
• inspekcija: Periodically inspect the fixture for any loose connections or signs of wear. If any issues are found, disconnect power and consult a qualified electrician.

Rješavanje problema

Ako imate problema sa svojim uređajem, pogledajte sljedeće uobičajene probleme i rješenja:

If the problem persists after trying these solutions, contact Progress Lighting customer support or a qualified electrician.

Specifikacije

Garancija i podrška

Ova rasvjetna tijela Progress Lighting dolaze sa 5-godišnja ograničena garancija. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support.

For warranty claims, technical assistance, or any questions regarding your product, please contact Progress Lighting customer service.

Također možete posjetiti službenu osobu Progress Lighting Store na Amazonu za više informacija i ponude proizvoda.