Uputstvo za upotrebu za vanjsku zidnu lampu Progress Lighting P6071-31

Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Progress Lighting P6071-31 outdoor wall lantern. Please read this manual thoroughly before beginning installation or use to ensure proper function and safety.

For your safety, always follow local electrical codes and consult a qualified electrician if you are unsure about any part of the installation process.

Sigurnosne informacije

UPOZORENJE: Always turn off power at the main circuit breaker before installing, cleaning, or servicing this fixture. Failure to do so may result in serious injury or death.

OPREZ: Ovaj proizvod mora biti instaliran u skladu sa važećim kodeksom za instalaciju od strane osobe upoznate sa konstrukcijom i radom proizvoda i opasnostima koje su uključene.

VAŽNO: Inspect wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire's insulation, do not attempt installation. Contact customer service.

This fixture is designed for outdoor use and is suitable for wet locations. Ensure all connections are properly sealed to prevent water intrusion.

Sadržaj paketa

Prije početka instalacije provjerite da li su sve komponente prisutne.

Sklop rasvjetnog tijela
Mounting Hardware Kit (screws, wire nuts, mounting strap)
Uputstva za instalaciju

Diagram showing all components included in the package for the outdoor wall lantern.

Slika 1: Eksplodirao view of the P6071-31 outdoor wall lantern components.

Specifikacije

Atribut	Vrijednost
Brand	Progres Lighting
Model	P6071-31
Boja	Crna
Materijal	Aluminijum
Stil	Tradicionalno
Forma rasvjetnog tijela	Zid
Dimenzije (cca.)	Height: 9-1/8", Width: 5-1/2", Depth from wall: 6-1/2"
Bulb Type	Incandescent, 100W Medium Base (Max)
Voltage	120V
Ocjena lokacije	cCSAus Wet location listed

Dimensional drawing of the Progress Lighting P6071-31 outdoor wall lantern showing height, width, and depth measurements.

Figure 2: Product dimensions for the P6071-31 fixture.

Postavljanje i instalacija

Before you begin, ensure the power is turned off at the circuit breaker. This fixture is designed for wall mounting over a standard 4" hexagonal recessed outlet box.

Prepare the Mounting Strap: Attach the mounting strap to the outlet box using the provided mounting screws. Ensure the strap is securely fastened.
Napravite električne veze:
- Connect the bare copper or green ground wire from the fixture to the green ground screw on the mounting strap.
- Connect the white wire from the fixture to the white (neutral) supply wire using a wire nut.
- Connect the black wire from the fixture to the black (hot) supply wire using a wire nut.
- Pažljivo uvucite sve žice u utičnicu.
Montirajte uređaj: Align the fixture with the mounting strap and secure it with the provided mounting screws. Ensure the fixture is flush against the wall and sealed to prevent water entry, especially in wet locations.
Instalirajte žarulju: Screw in a medium base incandescent bulb (max 100W) into the socket. Do not overtighten.
Vrati snagu: Ponovo uključite napajanje na glavnom prekidaču.

Detailed diagram showing the electrical wiring connections and mounting steps for the outdoor wall lantern.

Figure 3: Installation diagram for the P6071-31 outdoor wall lantern.

Uputstvo za upotrebu

Once installed and power is restored, the fixture can be operated via the wall switch connected to the circuit. This fixture does not include a built-in switch or sensor.

Ensure the light bulb is securely screwed into the socket.
Koristite standardni zidni prekidač za uključivanje ili isključivanje rasvjetnog tijela.
For optimal performance and longevity, use bulbs within the specified wattage range.

Održavanje

Redovno održavanje će pomoći u očuvanju izgleda i funkcionalnosti vaše vanjske zidne lampe.

čišćenje: To clean the fixture, turn off the power at the circuit breaker. Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass. For glass panels, a mild glass cleaner can be used.
Zamjena žarulje: Turn off the power at the circuit breaker and allow the bulb to cool before replacing. Unscrew the old bulb and screw in a new medium base incandescent bulb (max 100W). Do not exceed the maximum wattage.
inspekcija: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Ensure the seal around the mounting surface remains intact to prevent water intrusion.

Close-up view of the Progress Lighting P6071-31 outdoor wall lantern, highlighting the black finish and clear water glass panels.

Figure 4: The P6071-31 fixture, showing details of the finish and glass for cleaning reference.

Rješavanje problema

Ako naiđete na probleme sa svojim uređajem, pogledajte sljedeće uobičajene probleme i rješenja:

Problem	Mogući uzrok	Rješenje
Svjetlo se ne pali.	Struja je isključena na prekidaču. Labave žičane veze. Neispravna sijalica. Neispravan zidni prekidač.	Check circuit breaker and ensure it is in the "ON" position. Turn off power, check all wire connections and tighten if necessary. Zamijenite sijalicu novom, ispravnom. Consult a qualified electrician to check the switch.
Svetlo treperi.	Loose bulb. Labave žičane veze. Neispravan tip/snaga sijalicetage.	Zategnite sijalicu u grlu. Turn off power, check and tighten wire connections. Ensure bulb is correct type and wattage (max 100W incandescent).
Uređaj zuji.	Labava montaža. Nekompatibilni prekidač za prigušivanje (ako je primjenjivo).	Ensure fixture is securely mounted to the outlet box. If using a dimmer, ensure it is compatible with incandescent loads.

Garancija i podrška

Ovaj proizvod je pokriven a 1-godišnja ograničena garancija from the date of purchase. This warranty guarantees your complete satisfaction and includes professional after-sales customer service support.

For warranty claims, technical assistance, or any questions regarding your Progress Lighting P6071-31 fixture, please contact Progress Lighting customer service. Please have your model number (P6071-31) and proof of purchase ready when contacting support.

You can find more information and contact details on the official Progress Lighting webstranica: www.progresslighting.com

	Progress Lighting 8715, 8718 Assembly & Installation Instructions Step-by-step guide for assembling and installing Progress Lighting pendant fixtures, models 8715 and 8718, including wiring instructions and safety warnings.
	Progress Lighting P560341/P560342/P560343 1-LT Vodič za ugradnju vanjske zidne lampe Detaljna uputstva za instalaciju i sigurnosne informacije za vanjske zidne lampe s 1 svjetiljkom Progress Lighting P560341, P560342 i P560343. Uključuje sadržaj pakovanja, popis hardvera, korake za montažu, upute za njegu i informacije o garanciji.
	Upute za montažu i instalaciju Progress Lighting 7206EB Detaljan vodič za montažu i instalaciju fluorescentne stropne rasvjete Progress Lighting 7206EB, uključujući sigurnosna upozorenja, identifikaciju dijelova i detaljne upute na engleskom, španskom i francuskom jeziku.
	Upute za montažu lustera Progress Lighting P400395 sa 6 sijalica Sveobuhvatni vodič za montažu i instalaciju lustera Progress Lighting P400395 sa 6 sijalica. Sadrži sadržaj paketa, detalje o hardveru, sigurnosne mjere i detaljne postupke instalacije.
	Progress Lighting P500284-031 Atwell viseća lampa - Specifikacije i višeview Otkrijte viseću lampu Progress Lighting P500284-031 Atwell. Ovaj dokument pruža specifikacije, karakteristike i detalje instalacije za ovu upečatljivu rasvjetnu tijela, idealnu za predsoblja, kuhinje i trpezarije.
	Progress Lighting Hartwick P710087-009 Zidna svjetiljka od brušenog nikla Detaljne specifikacije za zidnu svjetiljku Progress Lighting Hartwick P710087-009, sa završnom obradom od brušenog nikla, graviranim opalnim staklom, usklađenom sa ADA standardima i pogodnom za moderne interijere. Uključuje dimenzije, električne instalacije i detalje za montažu.

Progress Lighting P6071-31