Stayer SCE 1650 WMC Uputstvo za upotrebu ugaone pile

1. Uvod

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Stayer SCE 1650 WMC Miter Saw. This versatile tool is designed for precise cutting of various materials including iron, aluminum, plastic, and wood. Please read this manual thoroughly before initial use and keep it for future reference.

2. Sigurnosna uputstva

Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Failure to follow these instructions may result in serious injury.

• Pročitajte sva uputstva: Familiarize yourself with the tool's controls and proper use.
• Nosite zaštitu za oči: Uvijek nosite zaštitne naočale ili zaštitne naočale sa bočnim štitnicima.
• Nosite zaštitu za sluh: Koristite čepiće za uši ili štitnike za uši tokom rada.
• Osigurajte radni komad: Uvijek clamp ili na drugi način osigurajte radni komad kako biste spriječili pomicanje tokom rezanja.
• Držite ruke čiste: Nikada ne stavljajte ruke blizu oštrice za rezanje.
• Održavajte čisto radno područje: Zatrpana područja izazivaju nesreće.
• Nemojte raditi u eksplozivnim atmosferama: Ne koristite električne alate u prisustvu zapaljivih tečnosti ili gasova.
• Isključite iz struje prije podešavanja: Always disconnect the saw from the power source before making any adjustments, changing accessories, or performing maintenance.
• Use the Correct Blade: Ensure the blade is appropriate for the material being cut and is sharp and undamaged.
• Izbjegavajte preterivanje: Održavajte pravilan položaj i ravnotežu u svakom trenutku.

3. Proizvod je gotovview

The Stayer SCE 1650 WMC is a robust miter saw featuring a durable aluminum base and upper table. It includes an electronic speed variator for optimized cutting across different materials.

Slika 1: Gotovoview of the Stayer SCE 1650 WMC Miter Saw. This image shows the complete miter saw unit, highlighting its red base, silver cutting table, and the main motor housing with the blade guard. The adjustable fence and clamping mechanisms are also visible.

Ključne komponente:

• Aluminum Base and Upper Table: Pruža stabilnost i izdržljivost.
• Electronic Variator: Allows adjustment of blade speed.
• Mehanizam za naginjanje: Enables bevel cuts up to 45°.
• Swiveling Table: Features self-locking positions for miter cuts at 22.5°, 45°, and 90°.
• Priključak za usisavanje prašine: Za povezivanje sistema za sakupljanje prašine.

4. Podešavanje

Before operating the miter saw, ensure it is properly set up and secured.

1. Raspakivanje: Carefully remove all components from the packaging. Verify that all included items are present: SCE 1650 WMC miter saw, Widia TCT Z-52 blade, parallel guide, 2 horizontal clamps, and service wrench.
2. Montaža: Securely mount the miter saw to a stable workbench using appropriate fasteners.
3. Instalacija oštrice: Ensure the Widia TCT Z-52 blade (Ø 254 x 3 x 30 mm) is correctly installed and tightened according to the instructions provided with the blade. Always unplug the saw before installing or changing blades.
4. Parallel Guide and Clamps: Install the parallel guide and horizontal clamps as needed for your specific cutting task to secure the workpiece.
5. Usisavanje prašine: Connect a suitable dust extraction system to the designated port to maintain a clean work environment.

5. Uputstvo za upotrebu

The Stayer SCE 1650 WMC is designed for precise cuts in various materials. Always ensure the workpiece is stable and secured before cutting.

5.1. Kontrola snage i brzine

• The saw operates at 1600W power.
• Use the electronic variator to adjust the no-load speed between 2500 and 4000 RPM (Giri/min) depending on the material being cut. Lower speeds are generally suitable for harder materials or larger cuts, while higher speeds are for softer materials or finer finishes.

5.2. Pravljenje rezova

1. Straight Cuts (0°): Position the workpiece against the fence. Ensure the swiveling table is locked at 0°. Maximum cutting capacity: 50 x 100 mm.
2. Miter Cuts (Angled Horizontal Cuts): Adjust the swiveling table to the desired angle (e.g., 22.5°, 45°). The table has self-locking positions for common angles. Maximum cutting capacity at 45°: 32 x 100 mm.
3. Bevel Cuts (Angled Vertical Cuts): Tilt the saw head up to 45° to the left or right. Maximum cutting capacity at 45° inclined: 150 x 20 mm or 90 x 50 mm.
4. Compound Cuts (Miter and Bevel): Combine miter and bevel adjustments for complex angles. Maximum cutting capacity at 45° miter and 45° bevel: 75 x 20 mm.
5. General Cutting Capacity:
   • 90° (Straight): 155 x 25 mm / 65 x 77 mm
   • 45° Right/Left (Miter): 103 x 30 mm / 55 x 77 mm
   • 45° Inclined (Bevel): 150 x 20 mm / 90 x 50 mm
   • 45° Compound (Miter & Bevel): 75 x 20 mm
6. Operacija: Lower the blade slowly into the workpiece, allowing the blade to reach full speed before contact. Apply steady, even pressure. Once the cut is complete, allow the blade to stop rotating before raising it from the workpiece.

6. Održavanje

Regular maintenance ensures the longevity and safe operation of your Stayer SCE 1650 WMC Miter Saw. Always unplug the tool before performing any maintenance.

• čišćenje: Regularly clean dust and debris from the saw, especially around the motor vents, blade guard, and cutting table. Use compressed air for hard-to-reach areas.
• Inspekcija oštrice: Inspect the blade before each use for sharpness, cracks, or missing teeth. Replace dull or damaged blades immediately.
• Inspekcija četkica: The motor uses brushes. Periodically inspect the carbon brushes for wear and replace them when they are worn down to their limit. Refer to a qualified service technician if unsure.
• podmazivanje: Apply light machine oil to moving parts and pivot points as recommended in a more detailed service manual (if available) or as needed to ensure smooth operation.
• Provjera pričvršćivača: Povremeno provjeravajte zategnutost svih matica, vijaka i šrafova. Zategnite sve labave pričvršćivače.

7. Otkrivanje problema

Ovaj odjeljak se bavi uobičajenim problemima s kojima se možete susresti pri korištenju ugaone pile.

8. Specifikacije

Technical specifications for the Stayer SCE 1650 WMC Miter Saw:

• Model: SCE1650WMC
• Snaga: 1600 W
• Voltage: 230 volti (AC)
• Brzina bez opterećenja: 2500 – 4000 RPM (Giri/min)
• Prečnik oštrice: Ø 254 mm
• Provrt oštrice: 30 mm
• Materijal oštrice: Tungsten Carbide (Widia TCT Z-52)
• Izvor napajanja: Corded Electric
• Težina: 16.5 kg
• Cutting Capacity (Max):
  • 90° (Straight): 155 x 25 mm / 65 x 77 mm
  • 45° Right/Left (Miter): 103 x 30 mm / 55 x 77 mm
  • 45° Inclined (Bevel): 150 x 20 mm / 90 x 50 mm
  • 45° Compound (Miter & Bevel): 75 x 20 mm

9. Garancija

STAYER products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official STAYER webZa detaljne uslove garancije posjetite stranicu. Sačuvajte dokaz o kupovini za slučaj reklamacije.

10. Podrška

For technical assistance, spare parts, or service inquiries, please contact your local STAYER dealer or authorized service center. You can also visit the official STAYER website for further support information and contact details.

Webstranica: www.stayer.es (Nprample, stvarni URL može varirati)