UpBright 12V 2.5A AC/DC Adapter User Manual

Uvod

This manual provides essential information for the safe and effective use of your UpBright 12V 2.5A AC/DC Adapter. This power supply is designed to provide reliable power to compatible HP HPE Aruba 303, 500, and 510 series wireless access points.

Molimo vas da pažljivo pročitate ovaj priručnik prije upotrebe proizvoda i sačuvate ga za buduću upotrebu.

Image: The UpBright 12V 2.5A AC/DC Adapter, showing the main unit with its US plug and the DC output connector. A magnified view of the DC plug tip is also visible.

Važne informacije o sigurnosti

• Ensure the adapter's input voltage (100-240VAC, 50/60Hz) matches your local power supply.
• Ne izlažite adapter vodi, vlazi ili ekstremnim temperaturama.
• Izbjegavajte ispuštanje ili izlaganje adaptera jakim udarcima.
• Do not disassemble or attempt to repair the adapter. Refer to qualified service personnel.
• Always unplug the adapter from the power outlet before cleaning or if it will be unused for an extended period.
• This adapter is designed for specific devices. Verify compatibility with your device's power requirements (12VDC, 2.5A, 30W) before use. Not for 48V versions.
• The adapter features Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP) for safety.

Uputstva za postavljanje

Follow these steps to connect your UpBright AC/DC Adapter to your compatible device:

1. Provjerite kompatibilnost: Confirm that your HP HPE Aruba wireless access point requires a 12V DC input with a current draw of 2.5A (30W) or less. This adapter is compatible with models such as APIN0303, APIN0505, APIN0504, APIN0514, APIN0515, AP-303, AP-505, AP-504, AP-514, AP-515, JX990A, JX990ACM, and AP-AC-12V30B.
2. Povežite se na uređaj: Insert the DC output plug of the adapter firmly into the power input port of your wireless access point.
3. Spojite na utičnicu: Plug the AC input prongs of the adapter into a standard 100-240V AC wall outlet.
4. Uključeno: Once connected, your device should power on. Refer to your device's manual for specific power-on indicators.

Image: The UpBright AC/DC Adapter connected to a power strip, illustrating a typical setup. A diagram highlighting the "Premium Cable" construction is also shown, indicating inner insulator, coarsening core, and TPE protective layers.

Uputstvo za upotrebu

The UpBright AC/DC Adapter operates automatically once connected. It converts the AC wall power to the required 12V DC power for your compatible device.

• Ensure the adapter is placed in a well-ventilated area to prevent overheating.
• Do not cover the adapter with cloth or other materials during operation.
• If your device has an on/off switch, use that to control its power. The adapter itself does not have a power switch.

Njega i održavanje

• čišćenje: Prije čišćenja isključite adapter iz utičnice i uređaja. Za brisanje vanjske strane koristite meku, suhu krpu. Ne koristite tekuća sredstva za čišćenje ili aerosole.
• Skladištenje: When not in use, store the adapter in a cool, dry place away from direct sunlight and moisture. Avoid tightly coiling the cable to prevent damage.
• inspekcija: Periodically inspect the adapter and its cable for any signs of damage, such as cuts, fraying, or bent pins. If damage is found, discontinue use and replace the adapter.

Rješavanje problema

If you encounter issues with your UpBright AC/DC Adapter, refer to the following common solutions:

• Uređaj se ne uključuje:
  • Provjerite je li adapter sigurno priključen i u zidnu utičnicu i u uređaj.
  • Provjerite da li zidna utičnica radi tako što ćete uključiti drugi uređaj.
  • Verify that the adapter's specifications (12V, 2.5A) match your device's power requirements.
  • Inspect the adapter cable and connectors for any visible damage.
• Adapter se zagrijava na dodir:
  • It is normal for the adapter to feel slightly warm during operation.
  • If it becomes excessively hot, disconnect it immediately and ensure it is in a well-ventilated area, not covered by anything. If the issue persists, discontinue use.
• Intermitentna snaga:
  • Check for loose connections at both the wall outlet and the device.
  • Ensure the cable is not bent or crimped, which could cause internal damage.

Ako koraci za rješavanje problema ne riješe problem, obratite se korisničkoj podršci.

Specifikacije proizvoda

Slika: pramples of international plug adapters (AU, EU, UK) that may be included with international orders, alongside a representation of the UpBright Limited Warranty Certificate.

Informacije o garanciji

Your UpBright AC/DC Adapter comes with the following warranty:

• Refund Period: 30 dana od dana kupovine.
• Exchange Period: 24 mjeseci od datuma kupovine.

Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the warranty certificate included with your product or contact customer support.

Korisnička podrška

If you have any questions, require assistance, or need to make a warranty claim, please contact UpBright customer support through the retailer where the product was purchased or visit the official UpBright store page for contact options.

For more information about UpBright products, visit the UpBright Store.