ADTRAN NetVanta 3140 Router User Manual

Uvod

This manual provides essential information for the installation, operation, and maintenance of the ADTRAN NetVanta 3140 Router. The NetVanta 3140 is a fixed-port, high-performance Ethernet router designed to support converged access and high-quality Voice services. It features three routed, autosensing Gigabit Ethernet interfaces, making it suitable for enterprise-class Internet access and secure corporate connectivity.

Sigurnosne informacije

Always observe basic safety precautions to reduce the risk of fire, electric shock, and injury to persons, including the following:

• Prije upotrebe uređaja pažljivo pročitajte sva uputstva.
• Ne izlažite uređaj kiši ili vlazi.
• Ne otvarajte uređaj casing. Za sve servisne radove obratite se kvalifikovanom servisnom osoblju.
• Osigurajte odgovarajuću ventilaciju oko uređaja.
• Koristite samo strujni adapter koji ste dobili uz uređaj.

Sadržaj paketa

Provjerite da li vaš paket sadrži sljedeće stavke:

• ADTRAN NetVanta 3140 Router (Model: 1700341F1)
• Adapter za napajanje
• Dokumentacija (Kratki vodič, Informacije o garanciji)

Note: Rack-mounting hardware may be sold separately.

Physical Overview

The ADTRAN NetVanta 3140 features various ports and indicators on its front and rear panels. Familiarize yourself with these components before installation.

Figure 1: Front Panel of NetVanta 3140 Router
This image displays the front panel of the ADTRAN NetVanta 3140 router. From left to right, it shows status LEDs (STAT, USB), three Gigabit Ethernet ports labeled GIG 0/1, GIG 0/2, and GIG 0/3, two USB ports, and a CONSOLE port (DB9 serial connector). The ADTRAN logo is visible on the left, and "NetVanta 3140" is printed on the right.

Komponente prednje ploče:

• STAT LED: Označava status sistema.
• USB LED: Indicates USB activity.
• GIG 0/1, GIG 0/2, GIG 0/3 Ports: Three autosensing Gigabit Ethernet interfaces for network connections.
• USB portovi: Za povezivanje kompatibilnih USB uređaja.
• CONSOLE port: A DB9 serial port for local management and configuration via a terminal emulator.

Setup

1. Plasman

Place the NetVanta 3140 on a flat, stable surface or install it in a standard 19-inch equipment rack (rack-mounting hardware not included). Ensure adequate ventilation and avoid placing the device near heat sources or in direct sunlight.

2. Priključak za napajanje

1. Connect the provided power adapter to the power input on the rear panel of the router.
2. Uključite drugi kraj adaptera za napajanje u odgovarajuću električnu utičnicu.
3. The device will power on automatically. Observe the STAT LED for boot-up sequence.

3. Mrežne veze

1. Connect your Internet service provider's (ISP) modem or network uplink to one of the Gigabit Ethernet ports (e.g., GIG 0/1).
2. Connect your local area network (LAN) devices (e.g., computers, switches) to the remaining Gigabit Ethernet ports.
3. Provjerite jesu li svi Ethernet kablovi sigurno spojeni.

4. Initial Configuration (Console Access)

For initial configuration or advanced management, connect a computer to the CONSOLE port using a serial cable (DB9). Use a terminal emulation program (e.g., PuTTY, Tera Term) with the following settings:

• Brzina prijenosa: 9600
• Bitovi podataka: 8
• Paritet: Nema
• Stop bitovi: 1
• Kontrola protoka: Nema

Refer to the ADTRAN OS documentation for detailed command-line interface (CLI) configuration instructions.

Uputstvo za upotrebu

System Boot-up

Upon power-on, the router will perform a self-test and load the ADTRAN OS. The STAT LED will blink during this process and become solid green once the system is operational.

LED indikatori

Osnovne mrežne operacije

Once configured, the NetVanta 3140 will route traffic between its Gigabit Ethernet interfaces according to its configuration. It supports features such as Quality of Service (QoS) for prioritizing traffic and Voice over IP (VoIP) readiness for voice services.

Održavanje

Ažuriranja firmvera

Periodically check the ADTRAN support website for firmware updates. Keeping the router's firmware up-to-date ensures optimal performance, security, and access to new features. Follow the instructions provided with the firmware update package carefully.

Čišćenje

To clean the device, power it off and disconnect the power adapter. Use a soft, dry cloth to wipe the exterior. Do not use liquid or aerosol cleaners, as they may damage the device.

Environmental Considerations

Ensure the operating environment remains within specified temperature and humidity ranges to prevent damage and ensure reliable operation.

Rješavanje problema

Nema snage

• Provjerite je li adapter za napajanje sigurno spojen i na ruter i na ispravnu električnu utičnicu.
• Provjerite da li je utičnica funkcionalna tako što ćete uključiti drugi uređaj.
• Provjerite da li je adapter za napajanje ispravan onaj koji dolazi s uređajem.

Nema mrežne veze

• Check the Ethernet cable connections to the GIG ports. Ensure they are firmly seated.
• Observe the GIG port LEDs. If they are off, there might be no link. Try a different cable or port.
• Verify the configuration of the router using the console port.
• Restart the router and connected network devices.

Console Access Issues

• Ensure the serial cable is correctly connected to the CONSOLE port and your computer.
• Verify the terminal emulation software settings (baud rate, data bits, parity, stop bits, flow control) match the recommended settings.
• Check if the correct COM port is selected in your terminal software.

Specifikacije

Garancija i podrška

Informacije o garanciji

ADTRAN products are covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty documentation included with your product or visit the official ADTRAN webSačuvajte dokaz o kupovini za slučaj reklamacije.

Tehnička podrška

For technical assistance, product documentation, or firmware downloads, please visit the official ADTRAN support portal. You can typically find support resources, FAQs, and contact information for technical support there.

ADTRAN Official Webstranica: www.adtran.com