Britax baza za autosjedalicu za bebe S908200 Uputstvo za upotrebu

1. Proizvod je gotovview

The Britax Infant Car Seat Base provides a secure and convenient foundation for compatible Britax infant car seats. Designed for travel flexibility across multiple vehicles, this base incorporates features to simplify installation and enhance safety.

Ključne karakteristike:

• Kompatibilnost: Designed for use with Britax B-safe 35, B-safe 35 elite, B-safe ultra, and Endeavors infant car seats.
• Impact-Absorbing Base: Engineered to compress and absorb crash energy, reducing potential injury.
• SafeCenter LATCH Installation: Facilitates easy and correct installation using LATCH connectors.
• Push-Button LATCH Connectors: Allows for simple attachment and detachment to vehicle LATCH anchors.
• Built-in Seat Belt Lock-Offs: Provides an alternative secure installation method using the vehicle's seat belt.
• Spring-Assisted Recline: Aids in achieving the proper installation angle.
• Dual Level Indicators: Visual guides to confirm the correct recline angle for installation.

Slika 1: Prednja strana view of the Britax Infant Car Seat Base, showing the overall design and red accents.

2. Postavljanje i instalacija

Proper installation of the infant car seat base is critical for child safety. Follow these steps carefully. Refer to your vehicle's owner's manual for specific LATCH or seat belt anchor locations.

2.1. Adjusting the Recline Angle

1. Postavite bazu autosjedalice na sjedište vozila.
2. Locate the recline adjustment lever on the front of the base.
3. Pull up on the recline adjustment lever and move the base up or down until the red marker is visible between the two lines on the recline angle indicators. This ensures the correct recline for your infant.

Figure 2: Close-up of the dual level indicators on the Britax Infant Car Seat Base, used to confirm the correct recline angle.

2.2. LATCH Installation (Lower Anchors and Tethers for Children)

1. Firmly pull to remove the lower LATCH connectors from their storage in the base.
2. Press and hold the lower connector release button and pull the lower connectors to lengthen the straps.
3. Press the lower connectors onto their adjacent vehicle lower anchors until a click is heard. Pull on the lower connectors to verify they are securely attached.
4. While pressing the center of the base into the vehicle seat, pull up on the lower connector straps located in the center of the base to tighten. To achieve the tightest install, you can push on the right or left of the base while pulling the corresponding LATCH webbing.
5. Feed any excess webbing back into the base and ensure that the lower connector straps are flush with the base.
6. Check that the base is secure by attempting to move it side-to-side and front-to-back at the belt path. The base should move less than one inch in any direction.

Figure 3: Illustration of the SafeCenter LATCH installation, showing a hand pulling the LATCH strap to tighten the base.

2.3. Seat Belt Installation (Alternative Method)

If your vehicle does not have LATCH anchors, or if you prefer to use the vehicle's seat belt, follow these general steps. Always refer to the full instruction manual for detailed guidance.

1. Route the vehicle's lap and shoulder belt through the designated belt path on the car seat base.
2. Zakopčajte pojas.
3. Engage the built-in lock-offs to secure the seat belt tightly.
4. Press down firmly on the base while pulling the shoulder belt to remove slack.
5. Check that the base is secure by attempting to move it side-to-side and front-to-back at the belt path. The base should move less than one inch in any direction.

Figure 4: Detail of the built-in lock-offs on the Britax Infant Car Seat Base, used for securing the vehicle's seat belt.

2.4. Video vodič za instalaciju

3. Operating the Car Seat Base

3.1. Attaching the Infant Car Seat to the Base

1. Poravnajte autosjedalicu za bebe sa bazom.
2. Place the infant car seat onto the base and press down firmly until a distinct click is heard. This indicates a secure connection.
3. Pull up on the infant car seat handle to verify that it is securely attached to the base.

3.2. Removing the Infant Car Seat from the Base

1. Locate the release lever on the back of the infant car seat (not the base).
2. Pull and hold the release lever.
3. Lift the infant car seat straight up from the base.

4. Održavanje

4.1. Upute za čišćenje

The car seat base features an easy-to-remove cover for cleaning. For general cleaning of the plastic and metal parts, use a mild soap and water solution. Do not use abrasive cleaners or solvents. Allow all parts to air dry completely before reassembly or use.

4.2. Inspekcija

Regularly inspect the car seat base for any signs of damage, wear, or missing parts. Check the LATCH connectors, seat belt path, and recline mechanism for proper function. If any damage is found, discontinue use and contact Britax customer service.

5. Otkrivanje problema

5.1. Base Not Secure (Moves More Than 1 Inch)

• Ugradnja REZNE: Ensure the LATCH straps are pulled as tightly as possible while pressing down on the base. Verify that the LATCH connectors are fully engaged with the vehicle anchors.
• Ugradnja sigurnosnog pojasa: Ensure the vehicle seat belt is routed correctly and the built-in lock-offs are engaged. Pull all slack from the seat belt while pressing down on the base.
• Kompatibilnost vozila: Confirm that the car seat base is compatible with your vehicle's seating position.

5.2. Incorrect Recline Angle

• Re-adjust the recline angle using the spring-assisted recline lever until the red marker is clearly visible between the two lines on the dual level indicators.
• Ensure the vehicle seat is not excessively sloped, which might prevent achieving the correct recline.

6. Specifikacije

7. Informacije o garanciji

For detailed warranty information regarding your Britax Infant Car Seat Base, please refer to the official documentation included with your product or visit the official Britax webstranica. Uslovi i odredbe garancije mogu se razlikovati.

8. Korisnička podrška

If you have any questions, require assistance with installation, or need to report a product issue, please contact Britax customer support. Contact information can typically be found on the Britax official weblokaciji ili unutar ambalaže proizvoda.