Uputstvo za upotrebu daljinskog upravljača DIRECTV RC72

Uvod

The DIRECTV RC72 Remote Control is designed to provide seamless control over your DIRECTV Genie DVRs and clients in RF (Radio Frequency) mode, and other DIRECTV-branded receivers and DVRs in IR (Infrared) mode. This remote is essential for 2014 and newer Toshiba DIRECTV-Ready TVs, offering advanced functionality and user-friendly operation.

Ključne karakteristike uključuju:

• Next-generation design with updated IR codes for modern televisions.
• Required for 2014 or newer Toshiba DIRECTV-ready TVs.
• Compatible with all DIRECTV-ready (RVU) televisions.
• Functions with older DIRECTV receivers when configured in IR mode.
• Provides on-screen tips to assist with button usage and programming.

Product Overview

Slika: Front view of the DIRECTV RC72 Remote Control. The remote is black and white, with a black top section containing navigation and function buttons, and a white bottom section with a numeric keypad. The DIRECTV logo is at the bottom.

Podešavanje i programiranje

The RC72 remote can operate in two primary modes: RF (Radio Frequency) for Genie DVRs and clients, and IR (Infrared) for older DIRECTV receivers and other devices like TVs and audio systems.

Pairing with DIRECTV Genie DVRs (RF Mode)

1. Ensure your Genie DVR is powered on.
2. Point the RC72 remote towards the Genie DVR.
3. Pritisnite i držite MUTE dugme i ENTER button simultaneously until the green light at the top of the remote flashes twice.
4. A message should appear on your TV screen confirming the remote is now paired in RF mode.

Programming for TV and Audio Devices (IR Mode)

To control your TV's power and volume, or other audio devices, you will need to program the remote using specific codes. The remote utilizes an extensive database of included codes.

1. Turn on the device you wish to program (e.g., your TV).
2. On the RC72 remote, press and hold the MUTE dugme i SELECT button simultaneously until the green light at the top of the remote flashes twice.
3. Enter the 5-digit code for your TV brand. Common codes can be found in your DIRECTV receiver's on-screen menu under "Remote Control Setup" or on the DIRECTV support website.
4. After entering the code, point the remote at the TV and press the POWER dugme. Ako se TV isključi, kod je ispravan.
5. If the TV does not turn off, repeat the process with another code for your brand until successful.
6. To program an audio device, follow similar steps, but select the appropriate device type during the programming process.

Note: On-screen tips provided by your DIRECTV receiver can guide you through the programming process effectively.

Uputstvo za upotrebu

Familiarize yourself with the buttons and their functions for optimal use of your DIRECTV RC72 remote control.

Top Section Buttons

• UKLJUČENO/ISKLJUČENO: Powers your DIRECTV receiver and programmed TV on or off.
• VODIČ: Prikazuje programski vodič.
• MENI: Accesses the main menu of your DIRECTV receiver.
• LISTA: Displays your recorded programs list.

Navigation and Control Buttons (Center Section)

• Strelice za smjer (gore, dolje, lijevo, desno): Navigate through menus and guides.
• ODABIR: Potvrđuje odabir.
• POVRATAK: Vraća se na prethodni ekran ili meni.
• IZLAZ: Izlazi iz trenutnog menija ili ekrana.
• INFO: Prikazuje informacije o trenutnom programu ili odabranoj stavci.
• Rekord (Crvena tačka): Pokreće snimanje trenutnog programa.

Kontrola jačine zvuka i kanala

• VOL (Pojačavanje/Smanjivanje jačine zvuka): Adjusts the volume of your programmed TV or audio device.
• CH (Prelazak na drugi/zadnji kanal): Changes the channel on your DIRECTV receiver.
• MUTE: Isključuje zvuk.
• PREV: Vraća se na prethodni kanal.

Kontrole reprodukcije

• PREMOTAJ NAZAD: Premotava reprodukciju unazad.
• REPRODUKCIJA/PAUZA: Reproducira ili pauzira sadržaj.
• BRZO NAPRIJED: Premotavanje unapred.
• STOP: Zaustavlja reprodukciju.

Numerička tipkovnica

• 0-9: Used for direct channel entry and other numeric inputs.
• ENTER (input): Confirms numeric entries or switches to a specific input.
• Dash (-): Used for sub-channels or other specific functions.

Održavanje

Proper care will extend the life of your remote control.

• čišćenje: Za čišćenje daljinskog upravljača koristite meku, suhu krpu. Ne koristite tekuća sredstva za čišćenje ili abrazivne materijale.
• Zamjena baterije: When the remote's performance degrades or the indicator light no longer flashes, it's time to replace the batteries. The RC72 remote typically uses two AA batteries.
  1. Otvorite poklopac odeljka za baterije na poleđini daljinskog upravljača.
  2. Uklonite stare baterije.
  3. Insert new AA batteries, ensuring correct polarity (+ and -).
  4. Čvrsto zatvorite poklopac odeljka za baterije.
• Skladištenje: Daljinski upravljač čuvajte na suhom mjestu, dalje od ekstremnih temperatura i direktne sunčeve svjetlosti.

Rješavanje problema

If you encounter issues with your RC72 remote, try the following solutions:

Specifikacije

Podrška

For further assistance, programming codes, or advanced troubleshooting, please refer to the official DIRECTV support resources:

• Visit the official DIRECTV website for support documentation and FAQs.
• Contact DIRECTV customer service for personalized assistance.
• Utilize the on-screen help features available through your DIRECTV receiver.

Note: Specific warranty information for this accessory may be available through your DIRECTV service provider or the point of purchase.