Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of your DS18 PRO-DKH1 2-inch Compression Driver with Aluminum Horn. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Karakteristike proizvoda
- 2-Inch Competition Compression Driver: Designed for high-quality audio performance, featuring a titanium diaphragm, mylar capacitor crossover, and an aluminum horn.
- Rukovanje vršnom snagom: Capable of handling up to 640W maximum power and 320W program power, delivering robust audio output.
- High-Quality Magnets: Equipped with a 35 oz Ferrite magnet for a wide range of tones and high-volume power handling.
- Integrated Aluminum Horn: Includes a durable aluminum horn, ensuring optimal sound dispersion and aesthetic integration.
- Trajne performanse: Engineered for long-lasting performance without excessive power draw from your amplifier.
Specifikacije
| Model | PRO-DKH1 |
| Tip | Compression Driver |
| RMS snaga | 600W |
| MAX snaga | 1000W |
| Osjetljivost | 108dB |
| Veličina glasovne zavojnice | 2.03" |
| Impedansa | 8 Ohma |
| Frekvencijski odziv | 800Hz - 18.5kHz |
| Materijal dijafragme | Titanijum |
| Horn Material | Aluminijum |
| Magnet Weight | 35oz |
| Horn Dimensions | 157 x 157 x 132mm (6"D x 6"W x 7.75"H) |
| Prečnik grla | 2" |
| Ukupna dubina | 123 mm / 4.84" |
| Težina artikla | 7 funti |
| Uključene komponente | Aluminum Horn |
Postavljanje i instalacija
Pravilna instalacija je ključna za optimalne performanse i sigurnost. Preporučuje se da instalaciju izvrši kvalificirani stručnjak.
Montaža
- Ensure the mounting surface is sturdy enough to support the weight of the compression driver (7 pounds).
- Refer to the product dimensions (6"D x 6"W x 7.75"H) and throat diameter (2") to prepare the mounting hole.
- Secure the compression driver using appropriate fasteners through the mounting holes on the horn.
Ožičenje
- Connect the positive (+) terminal of the compression driver to the positive output of your amplifier.
- Connect the negative (-) terminal of the compression driver to the negative output of your amplifier.
- Osigurajte da su svi priključci sigurni i pravilno izolirani kako biste spriječili kratki spoj.
- It is recommended to use a high-pass filter (HPF) to protect the driver from low frequencies. A crossover that cuts frequencies below 800Hz is ideal for this unit.
Figure 1: DS18 PRO-DKH1 Compression Driver with Aluminum Horn.
Figure 2: Technical drawing showing dimensions and a frequency response graph for the PRO-DKH1.
Uputstvo za upotrebu
The DS18 PRO-DKH1 is designed to reproduce high frequencies with clarity and power. Follow these guidelines for optimal operation:
- Osigurajte svoje amplifier is properly matched to the 8 Ohm impedance of the driver.
- Avoid exceeding the recommended RMS power of 600W to prevent damage.
- Use a high-pass filter (HPF) to prevent low-frequency signals from reaching the driver, which can cause distortion and damage.
- Gradually increase volume levels to prevent sudden peaks that could harm the driver or your hearing.
Održavanje
Regular maintenance helps ensure the longevity and performance of your compression driver.
- čišćenje: Use a soft, dry cloth to wipe down the horn and driver body. Avoid using harsh chemicals or abrasive materials.
- inspekcija: Povremeno provjeravajte sve spojeve ožičenja na čvrstoću i znakove habanja ili korozije.
- Okruženje: Keep the driver in a dry environment, away from direct sunlight and extreme temperatures.
Rješavanje problema
If you experience issues with your DS18 PRO-DKH1, refer to the following common problems and solutions:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Nema zvuka | Loose wiring, incorrect connections, amplifier off, damaged voice coil. | Check all wiring, ensure correct polarity, verify amplifier power, inspect voice coil for damage. |
| Distorted Sound | Overpowering, improper crossover settings, damaged diaphragm. | Smanji amplifier gain, verify HPF settings, inspect diaphragm for tears or creases. |
| Low Output | Incorrect impedance matching, low amplifier power, phase issues. | Osigurati amplifier matches 8 Ohm impedance, check amplifier output, verify speaker phase. |
If problems persist, contact DS18 customer support or a qualified audio technician.
Product Demonstration (Related Model)
Video 1: Demonstration of the DS18 PRO-DRNSC1.5DK Neodymium Driver. While not the exact PRO-DKH1 model, this video provides a general overview and sound test of a related DS18 compression driver.
Garancija i podrška
The DS18 PRO-DKH1 Compression Driver comes with a Ograničena garancija. For specific warranty terms, conditions, and duration, please refer to the warranty card included with your product or visit the official DS18 website.
For technical support, service, or further inquiries, please contact DS18 customer service through their official channels. Keep your purchase receipt and product model number (PRO-DKH1) handy when contacting support.
