Uvod
Thank you for choosing the AIMS Power 5000 Watt Pure Sine Power Inverter. This industrial-grade inverter is designed to convert 12 Volt DC power from batteries into 120 Volt AC pure sine wave power, suitable for a wide range of sensitive electronics and heavy-duty appliances. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your inverter.
Ključne karakteristike:
- 5000 Watt Continuous Power: Provides stable power for demanding applications.
- 10000 Watt Surge Capacity: Handles high startup loads from motors and appliances.
- 12 Volt DC Input: Compatible with standard 12V battery systems.
- Izlaz čistog sinusnog vala: Ensures clean, stable power for sensitive electronics.
- Selectable Frequency (50Hz/60Hz): Adaptable to various regional power standards.
- Visoka efikasnost: Improved output performance even at low input voltages.
- Dual GFCI Outlets: Two 20A Ground Fault Circuit Interrupter outlets for enhanced safety.
- AC Terminal Block Connector: Direct connect option for hardwired applications.
- Remote On/Off Switch Capability: For convenient control.
- Sveobuhvatna zaštita: Includes short circuit, overload, over-temperature, low/high voltage zaštita.
- 5 Function Protection LED Indicator: Provides visual status and fault alerts.
- Thermally Controlled Dual Cooling Fans: Ensures optimal operating temperature.
Sigurnosne informacije
Read all instructions and warnings before operating the inverter. Failure to follow these instructions may result in electric shock, fire, serious injury, or death.
- ventilacija: Osigurajte odgovarajuću ventilaciju oko invertera. Ne blokirajte otvore za hlađenje.
- Okruženje: Install the inverter in a dry, cool, and well-ventilated area, away from direct sunlight, heat sources, and flammable materials. Avoid exposure to water or excessive humidity.
- Ožičenje: Use appropriate gauge wiring for DC input connections to prevent overheating and voltage drop. Ensure all connections are tight and secure.
- uzemljenje: Pravilno uzemljite kućište invertera na odgovarajuće uzemljenje.
- Sigurnost baterije: Work in a well-ventilated area when connecting batteries. Wear eye protection. Do not short-circuit battery terminals.
- Kvalificirano osoblje: Instalaciju i servisiranje treba da obavlja kvalifikovano osoblje.
- Nosivost: Do not exceed the inverter's continuous or surge power ratings.
Pravno odricanje od odgovornosti: Ovaj proizvod može sadržavati materijale na koje se upozorava prema kalifornijskom prijedlogu 65.
Postavljanje i instalacija
Proper installation is crucial for the performance and longevity of your inverter. Follow these steps carefully.
1. Choosing a Location:
- Select a location that is dry, cool, and well-ventilated.
- Osigurajte dovoljan prostor oko invertera za protok zraka, posebno oko ventilatora za hlađenje.
- Mount the inverter securely on a flat, non-flammable surface.
2. DC Input Connections:
Connect the inverter directly to your 12V battery bank using heavy-gauge cables. Shorter cables and larger gauge wires minimize voltagsmanjite i maksimizirajte efikasnost.
- Connect the positive (+) terminal of the inverter to the positive (+) terminal of the battery bank.
- Connect the negative (-) terminal of the inverter to the negative (-) terminal of the battery bank.
- Ensure all connections are clean, tight, and free of corrosion.
Slika 1: Pozadi view of the inverter with DC input terminals and cooling fans.
Slika 2: Nagnuti zadnji dio view showing the robust battery connection points.
3. AC Output Connections:
The inverter features two GFCI dual outlets and a direct connect AC terminal block.
- For standard appliances, plug them directly into the GFCI outlets.
- For hardwired applications, use the AC terminal block. Ensure proper wiring of Neutral, Earth (Ground), and Hot lines.
Slika 3: Prednja strana view of the inverter with AC outlets and control panel.
4. Uzemljenje:
Connect the inverter's chassis ground terminal to a reliable earth ground point. This is essential for safety and proper operation.
Uputstvo za upotrebu
Once installed, operating your AIMS Power inverter is straightforward.
1. Uključivanje/isključivanje:
- Ensure all DC and AC connections are secure before powering on.
- Locate the red power switch on the front panel.
- To turn on, press the power switch to the 'ON' position. The green 'on' LED indicator should illuminate.
- To turn off, press the power switch to the 'OFF' position.
Figure 4: Close-up of the inverter's front panel, showing the power switch and indicators.
2. Odabir frekvencije:
A switch on the front panel allows you to select between 50Hz and 60Hz output frequency. Ensure this matches the requirements of your connected appliances.
3. Remote On/Off Switch:
The inverter supports a remote on/off switch for convenient operation from a distance. Connect the remote switch cable to the designated port on the inverter.
4. Understanding LED Indicators:
The 5 Function Protection LED indicator provides visual feedback on the inverter's status and any active protections. Refer to the troubleshooting section for specific fault indications.
Održavanje
Regular maintenance ensures optimal performance and extends the lifespan of your inverter.
- čišćenje: Periodically clean the exterior of the inverter with a dry cloth. Do not use liquid cleaners.
- ventilacija: Ensure cooling vents are free from dust and debris. The dual cooling fans are thermally controlled and will activate as needed to maintain optimal temperature.
- Veze: Regularly check all DC and AC connections for tightness and signs of corrosion. Loose connections can lead to overheating and poor performance.
- Zdravlje baterije: Maintain your battery bank according to the battery manufacturer's recommendations. A healthy battery bank is essential for inverter performance.
Rješavanje problema
This section provides guidance for common issues you might encounter. For complex problems, contact AIMS Power technical support.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Inverter se ne uključuje. | No DC input power; Loose battery connections; Blown DC fuse (external); Inverter fault. | Provjerite zapreminu baterijetage; Verify all DC connections are secure; Check external DC fuse; Contact support if problem persists. |
| Nema AC izlaza. | Overload protection; Low battery shutdown; Over-temperature shutdown; Short circuit on AC output; AC breaker tripped. | Reduce load; Recharge batteries; Allow inverter to cool; Check AC wiring for shorts; Reset AC breaker. |
| Inverter beeps or shuts down under load. | Niska zapremina baterijetage; Overload; Over-temperature. | Provjerite zapreminu baterijetage and charge level (Low Battery Shut Down: 10.0V); Reduce connected load; Ensure adequate ventilation. |
| Fans not running. | Normal operation (thermally controlled); Fan malfunction. | Fans only run when temperature reaches 40ºC. If inverter is hot and fans are not running, contact support. |
| Miris dima ili paljevine. | Interni kvar komponente. | Immediately disconnect power from the inverter. Do not attempt to operate. Contact AIMS Power support for repair or replacement. |
Specifikacije
Detailed technical specifications for the AIMS Power 5000 Watt Pure Sine Power Inverter.
| Specifikacija | Vrijednost |
|---|---|
| Kontinuirana izlazna snaga | 5000 Watts |
| Surge Output Power | 10000 Watts (1/2 second) |
| DC Input Voltage | 13.2 V (Operating Range: 10.5V - 15V) |
| Output Voltage (bez opterećenja) | 120Vac +/- 3% |
| Izlazni talasni oblik | Čisti sinusni val |
| Izlazna frekvencija | 50Hz or 60Hz (Selectable) |
| Efikasnost | 91% |
| No Load Current (Fan Off) | 2.6A (12 V) |
| No Load Current (Fan On) | 4.4A (12 V) |
| Low Battery Shut Down | 10.0V |
| Low Battery Return on Power | 11.2V |
| High Battery Shut Down | 15.9V |
| High Battery Return on Power | 15.0V |
| Zaštita od previsoke temperature | -25ºC - 79ºC |
| Cooling Fan Activation Temperature | 40ºC |
| Dimenzije (D x Š x V) | 25.59 x 8.86 x 6.22 inča |
| Težina | 25.7 funte |
| AC utičnice | 2 x GFCI Dual Outlets (20A per block) |
Garancija i podrška
AIMS Power is committed to providing reliable products and excellent customer service.
Informacije o garanciji:
This AIMS Power inverter typically comes with a 1 godine garancije covering parts and labor. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the documentation included with your product or contact AIMS Power directly.
tehnička podrška:
For technical assistance, troubleshooting, or warranty inquiries, please contact AIMS Power support:
- Telefon: 775-359-6703
- Zvanični korisnički priručnik (PDF): Preuzmite PDF priručnik
- AIMS Power Store: Visit AIMS Power Store on Amazon
When contacting support, please have your product model number (PWRIG500012120S) and purchase date ready.