Bixolon SRP-350IIICOSG Thermal Receipt Printer User Manual

1. Uvod

This manual provides essential instructions for the safe and efficient use of your Bixolon SRP-350IIICOSG Thermal Receipt Printer. Please read this manual thoroughly before operating the printer and retain it for future reference. This printer is designed for point-of-sale (POS) receipt printing applications.

2. Sigurnosne informacije

• Napajanje: Use only the power supply provided with the printer. Using an incorrect power supply may damage the printer and void the warranty.
• plasman: Place the printer on a stable, level surface. Avoid locations with excessive dust, humidity, or direct sunlight.
• ventilacija: Ensure adequate ventilation around the printer to prevent overheating. Do not block ventilation openings.
• Kontakt s tekućinom: Keep the printer away from liquids. In case of accidental liquid spillage, immediately disconnect the power and contact qualified service personnel.
• Pokretni dijelovi: Keep hands and foreign objects away from the paper cutter and other moving parts during operation.

3. Sadržaj paketa

Provjerite da li su sve stavke prisutne u paketu:

• Bixolon SRP-350IIICOSG Thermal Receipt Printer
• Napajanje
• Kabl za napajanje
• Rolna papira za početnike
• Korisnički priručnik (ovaj dokument)

4. Podešavanje

4.1 Raspakivanje i postavljanje

Carefully remove the printer from its packaging. Place the printer on a flat, stable surface near your computer or POS system.

4.2 Povezivanje napajanja

1. Priključite kabl za napajanje na napajanje.
2. Plug the power supply connector into the power port on the back of the printer.
3. Uključite kabl za napajanje u uzemljenu električnu utičnicu.

4.3 Connecting Data Cables

The SRP-350IIICOSG printer supports Serial and USB interfaces.

Slika 4.3.1: Pozadi view of the Bixolon SRP-350IIICOSG printer, illustrating the various connection ports including power, USB, serial, and Ethernet.

• USB veza: Connect one end of a USB cable (Type B) to the USB port on the printer and the other end to an available USB port on your computer or POS system.
• Serijska veza: Connect one end of a serial cable (DB9) to the serial port on the printer and the other end to an available serial port on your computer or POS system.

4.4 Loading the Paper Roll

1. Otvorite poklopac štampača pritiskom na polugu za otvaranje poklopca.
2. Insert the new paper roll into the paper compartment with the paper feeding from the bottom.
3. Izvucite malu količinu papira pored rezača.
4. Čvrsto zatvorite poklopac štampača dok ne klikne na svoje mjesto.

Slika 4.4.1: Prednja strana view of the Bixolon SRP-350IIICOSG printer, showing a paper roll correctly loaded and ready for printing.

4.5 Instalacija drajvera

Before using the printer, you must install the appropriate drivers on your computer or POS system. Drivers are typically available on the Bixolon official webstranica. Slijedite upute koje ste dobili uz paket upravljačkih programa za instalaciju.

5. Upravljanje štampačem

5.1 Uključivanje/isključivanje

To power on the printer, press the power switch located on the side or back of the printer to the 'ON' position. To power off, press the switch to the 'OFF' position.

5.2 Indikatori statusa

The printer features LED indicators to show its current status:

• LED za napajanje: Illuminates when the printer is powered on.
• LED dioda greške: Flashes or illuminates to indicate an error condition (e.g., paper out, cover open, cutter error). Refer to the troubleshooting section for details.
• Papirna LED dioda: Svetli kada je rolna papira pri kraju ili je nestala.

5.3 Štampanje probne stranice

To print a self-test page:

1. Provjerite da li je štampač isključen i da li je papir umetnut.
2. Držite pritisnuto dugme FEED.
3. While holding the FEED button, turn on the printer.
4. Release the FEED button once the printer starts printing.

The printer will print a test page showing its current settings and status.

6. Održavanje

6.1 Čišćenje glave za štampanje

Regular cleaning of the print head ensures optimal print quality and extends printer life. Clean the print head using an alcohol swab or a specialized print head cleaning pen.

1. Isključite štampač i iskopčajte kabl za napajanje.
2. Otvorite poklopac štampača.
3. Gently wipe the thermal elements of the print head with the cleaning tool.
4. Ostavite glavu za štampanje da se potpuno osuši prije nego što zatvorite poklopac i ponovo uključite napajanje.

6.2 Zamjena role papira

When the paper roll is depleted, the paper out LED will illuminate. Follow the steps in Section 4.4 to replace the paper roll.

6.3 Čišćenje automatskog rezača

If the auto cutter experiences frequent jams or malfunctions, it may require cleaning. Use a soft brush or compressed air to remove paper dust and debris from the cutter mechanism.

7. Otkrivanje problema

Ovaj odjeljak se bavi uobičajenim problemima na koje možete naići pri radu s vašim pisačem.

8. Specifikacije

Key technical specifications for the Bixolon SRP-350IIICOSG Thermal Receipt Printer:

9. Garancija i podrška

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Bixolon webstranica. Tamo možete pronaći upravljačke programe, često postavljana pitanja i kontakt informacije za korisničku podršku.

Bixolon Official Webstranica: www.bixolon.com