Intermatic EC210WK Countdown Timer User Manual

1. Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Intermatic EC210WK Countdown Timer. This device is designed to provide silent, timed control for various electrical loads, enhancing energy savings and convenience in your home or office.

The EC210WK offers selectable countdown times of 10, 20, 30, and 60 minutes, along with a "HOLD" function for continuous operation. It is suitable for controlling indoor and outdoor lighting, bathroom and exhaust fans, and other energy-consuming appliances.

2. Važne informacije o sigurnosti

UPOZORENJE: Risk of electric shock. Improper installation can lead to serious injury or death. Always turn off power at the circuit breaker or fuse box before installing or servicing this device. Installation should be performed by a qualified electrician or in accordance with local electrical codes.

• Prije instalacije isključite struju na prekidaču.
• Osigurajte da su svi spojevi ožičenja sigurni.
• Ovaj uređaj je samo za upotrebu u zatvorenom prostoru.
• Ne prekoračujte maksimalna opterećenja navedena u odjeljku sa specifikacijama.
• A neutral wire is required for operation.

3. Sadržaj paketa

Prije početka instalacije provjerite da li su sve komponente prisutne:

• Intermatic EC210WK Countdown Timer (1 unit)
• Uputstvo za upotrebu (ovaj dokument)

Note: A wall plate is sold separately and is not included with this unit.

4. Instalacija

4.1 Potreban alat

• Odvijač (Phillips i/ili ravni)
• Skidači žice
• Električna traka (opciono)
• Voltage Tester (preporučeno)

4.2 Dijagram ožičenja i priključci

The EC210WK timer requires a neutral wire for proper operation. Ensure your electrical box has a neutral wire available. Refer to the wiring diagram below for correct connections.

1. Isključite napajanje: Pronađite prekidač koji kontrolira prekidač koji zamjenjujete i isključite ga. Provjerite je li napajanje isključeno pomoću regulatora glasnoće.tage tester.
2. Uklonite stari prekidač: Carefully remove the existing wall plate and unscrew the old switch from the electrical box. Disconnect the wires from the old switch.
3. Identifikujte žice:
   • crna žica: Connects to the incoming 120 VAC HOT line.
   • Bijela žica: Connects to the NEUTRAL line.
   • crvena žica: Connects to the LOAD (the appliance or light fixture).
   • zelena žica: Connects to the GROUND wire.
4. Connect New Timer: Using wire nuts (not included), connect the wires from the EC210WK timer to the corresponding wires in the electrical box.
   • Timer's Black wire to House Hot wire.
   • Timer's White wire to House Neutral wire.
   • Timer's Red wire to House Load wire.
   • Timer's Green wire to House Ground wire.
5. Tajmer montiranja: Carefully fold the wires into the electrical box, ensuring no wires are pinched. Secure the timer to the electrical box using the provided screws.
6. Instalirajte zidnu ploču: Attach a standard decorator-style wall plate (not included) over the timer.
7. Vrati snagu: Ponovo uključite napajanje na prekidaču.

5. Operacija

The Intermatic EC210WK timer features five push buttons for selecting countdown durations and a "HOLD" function.

1. Selecting a Countdown Time: Press the desired time button (10 MIN, 20 MIN, 30 MIN, or 60 MIN). The corresponding LED indicator will illuminate, and the connected load will turn ON for the selected duration. The load will automatically turn OFF when the countdown expires.
2. "HOLD" Function: Press the "HOLD" button to keep the connected load ON continuously. The "HOLD" LED indicator will illuminate. To exit the "HOLD" function, press any of the countdown time buttons, or press the "HOLD" button again to turn the load OFF.
3. Canceling a Countdown: To turn OFF the connected load before the countdown expires, press the currently active countdown button again, or press the "HOLD" button (which will then require a second press to turn off if the load was already on).

6. Održavanje

The Intermatic EC210WK Countdown Timer requires minimal maintenance.

• čišćenje: To clean the surface of the timer, wipe with a soft, damp krpu. Ne koristite abrazivna sredstva za čišćenje ili rastvarače. Prije čišćenja provjerite da li je napajanje isključeno.
• inspekcija: Periodically inspect the timer and wall plate for any signs of damage or loose connections. If any issues are found, turn off power at the circuit breaker and consult a qualified electrician.

7. Otkrivanje problema

If you experience issues with your EC210WK timer, refer to the following common problems and solutions:

8. Specifikacije

Technical specifications for the Intermatic EC210WK Countdown Timer:

• Model: EC210WK
• Boja: Bijelo
• Ulazni voltage: 120 VAC, 60 Hz
• Otporno opterećenje: 15 A, 1800 W
• Tungsten Load: 8.3 A, 1000 W
• Inductive Ballast: 8A, 1000 VA
• Elektronski balast: 500 VA
• motor: 1 / 4 KS
• Countdown Settings: 10, 20, 30, 60 minutes, and HOLD
• Vrsta montaže: U zidu
• Stil prebacivanja: SPST
• Težina artikla: 5.3 unce
• Certifikati: UL Listed

9. Garancija i podrška

garancija: This Intermatic EC210WK Countdown Timer is covered by a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

Korisnička podrška: For technical assistance, warranty claims, or further information, please contact Intermatic customer service. Refer to the official Intermatic webstranicu za trenutne kontakt podatke.

Molimo sačuvajte dokaz o kupovini u svrhu garancije.