Intermatic ST01K Astronomski digitalni zidni tajmer - uputstvo za upotrebu

1. Uvod

Thank you for choosing the Intermatic ST01K Astronomic Digital In-Wall Timer. This advanced timer is designed to provide convenient and energy-efficient control of your lighting. Featuring astronomic capabilities, it automatically adjusts to daily sunrise/sunset changes and daylight saving time, ensuring your lights operate precisely when needed. Its unique design allows for installation without a neutral wire, making it ideal for retrofits and remodels. The ST01K supports both single-pole and 3-way applications and is compatible with LED, CFL, and incandescent lighting.

2. Važne informacije o sigurnosti

WARNING: Risk of Electric Shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing. Improper installation can result in serious injury or death.

• Prije instalacije i rada pažljivo pročitajte sva uputstva.
• This device must be installed by a qualified electrician in accordance with all national and local electrical codes.
• Do not use this timer with appliances that could cause unsafe conditions if operated unattended (e.g., sunlamps, saunas, heaters, etc.).
• Osigurajte da su svi spojevi žica sigurni i pravilno izolirani.
• Raspon radne temperature: 32°F do 122°F (0°C do 50°C).

3. Sadržaj paketa

Molimo Vas da provjerite da li su sve komponente prisutne prije početka instalacije:

• Intermatic ST01K Astronomic Digital In-Wall Timer
• Upute za instalaciju i upotrebu
• CR2 baterija (unaprijed instalirana)

Note: A decorator style wall plate is sold separately and is required for a finished installation.

4. Postavljanje i instalacija

The ST01K timer is designed for easy installation in standard wall boxes and does not require a neutral wire, making it suitable for older homes or locations where a neutral wire is not readily available. It can be used in both single-pole and 3-way wiring configurations.

4.1 Wiring Diagram (Single-Pole Application)

1. Isključite napajanje: Pronađite prekidač ili osigurač koji kontrolira prekidač za svjetlo koji zamjenjujete i isključite ga. Provjerite je li napajanje isključeno pomoću regulatora glasnoće.tage tester.
2. Uklonite stari prekidač: Carefully remove the existing wall plate and switch from the wall box. Disconnect the wires from the old switch.
3. Identifikujte žice: In a single-pole setup, you will typically have two hot wires (line and load) and a ground wire. The ST01K does not require a neutral wire.
4. Spojite žice:
   • Connect the timer's crna žica to the incoming line (hot) wire sa električne ploče.
   • Connect the timer's crvena žica to the load wire going to the light fixture.
   • Connect the timer's zelena žica to the žica za uzemljenje in the wall box.
   • Cap off any unused wires (e.g., the blue wire for 3-way applications) with a wire nut.
5. Tajmer montiranja: Carefully push the wired timer into the wall box. Secure it with the provided screws.
6. Instalirajte zidnu ploču: Attach your decorator style wall plate (sold separately).
7. Vrati snagu: Ponovo uključite napajanje na prekidaču.

4.2 Wiring Diagram (3-Way Application)

For 3-way applications, the ST01K can replace one of the existing 3-way switches. The blue wire on the timer is used as the traveler wire. Refer to the detailed wiring diagrams provided in the physical manual for specific 3-way configurations, as they can vary.

An image showing the white Intermatic ST01K Astronomic Digital In-Wall Timer. The timer features a digital LCD display showing '12:00' and a large rocker switch below it. The unit is designed for in-wall installation, with metal mounting brackets visible on the top and bottom. The side of the unit shows the 'INTERMATIC INC' branding.

5. Uputstvo za upotrebu

The ST01K timer features a large LCD display for easy readout and intuitive programming. It supports up to 20 ON/OFF events and includes astronomic, random, and automatic daylight saving time adjustment features.

5.1 Početno podešavanje i podešavanje vremena

1. Uključeno: After installation, turn on the power at the circuit breaker. The display will illuminate.
2. Postavite trenutno vrijeme: Press the 'CLOCK' button. Use the 'HOUR' and 'MIN' buttons to set the current time. Press 'DAY' to set the current day of the week. Press 'CLOCK' again to save.
3. Set Location (Astronomic Feature): The astronomic feature requires setting your geographical location for accurate sunrise/sunset calculations. Refer to the full manual for detailed steps on setting your latitude and longitude or selecting a pre-programmed city.
4. Ljetno računanje vremena (DST): The timer automatically adjusts for Daylight Saving Time. Ensure this feature is enabled in the settings (refer to the full manual for menu navigation).

5.2 Programiranje događaja UKLJUČENO/ISKLJUČENO

The ST01K allows for up to 20 ON/OFF events. Events can be programmed for specific times or relative to sunrise/sunset (astronomic events).

1. Uđite u programski način rada: Press the 'PROG' button. The display will show '1 ON'.
2. Set ON Time: Use 'HOUR', 'MIN', and 'DAY' buttons to set the desired ON time and days of the week for Program 1. You can select specific days, weekdays, weekends, or everyday.
3. Set OFF Time: Press 'PROG' again. The display will show '1 OFF'. Set the desired OFF time and days for Program 1.
4. Add More Programs: Continue pressing 'PROG' to cycle through and set up to 20 ON/OFF programs.
5. Izlaz iz programskog moda: Press the 'CLOCK' button to exit program mode and return to normal operation.

5.3 Manual Override and Random Feature

• Ručno poništavanje: The large rocker switch on the timer allows for instant manual ON/OFF control, overriding the programmed schedule temporarily. The timer will resume its schedule at the next programmed event.
• Random Feature: This feature can vary the programmed ON/OFF times by a few minutes (typically 0-30 minutes) to give your home a 'lived-in' appearance when you are away. Activate this feature through the timer's menu settings (refer to the full manual).

6. Održavanje

The Intermatic ST01K timer is designed for long-lasting, maintenance-free operation. However, occasional care can ensure optimal performance.

• čišćenje: To clean the timer, gently wipe the surface with a soft, damp krpom. Ne koristite abrazivna sredstva za čišćenje, rastvarače ili sredstva za čišćenje u spreju direktno na uređaj.
• Rezervna kopija baterije: The timer includes a CR2 battery for backup, preserving settings during power outages. The average battery life is approximately 8000 hours. If the display becomes dim or erratic during a power outage, the battery may need replacement. Refer to the full manual for battery replacement instructions.

7. Otkrivanje problema

If you experience issues with your ST01K timer, please consult the following common problems and solutions:

If the problem persists after trying these solutions, please contact Intermatic Customer Support.

8. Specifikacije

9. Garancija i podrška

Intermatic products are designed for reliability and performance. This product comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty documentation included with your product or visit the official Intermatic website.

Korisnička podrška

If you have any questions regarding the installation, operation, or troubleshooting of your Intermatic ST01K timer, please contact Intermatic Customer Support:

• Webstranica: www.intermatic.com
• Telefon: Pogledajte na webstranica za trenutne kontaktne brojeve.

Please have your model number (ST01K) and purchase information ready when contacting support.