GROHE 23352000 Start Loop Single-Lever Bidet Mixer User Manual

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your GROHE 23352000 Start Loop Single-Lever Bidet Mixer. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.

Figure 1: GROHE 23352000 Start Loop Single-Lever Bidet Mixer. This image shows the complete bidet mixer with its single lever handle and chrome finish, designed for modern bathroom aesthetics.

2. Sigurnosne informacije

• Uvijek isključite glavni dovod vode prije početka bilo kakvih instalacijskih ili održavajućih radova.
• Osigurajte da su svi spojevi sigurni kako biste spriječili curenje.
• Ako niste sigurni u vezi bilo kojeg dijela procesa instalacije, obratite se kvalificiranom vodoinstalateru.
• Zaštitite proizvod od mraza.
• Use only genuine GROHE spare parts for repairs.

3. Sadržaj paketa

Verify that all components are present before starting installation. The package typically includes:

• GROHE Start Loop Single-Lever Bidet Mixer
• Pop-up waste set (1 1/4")
• Montažni hardver
• Flexible connection hoses (G3/8)
• Uputstvo za upotrebu

4. Postavljanje i instalacija

The GROHE 23352000 bidet mixer is designed for single-hole installation. The GROHE QuickFix design facilitates faster and easier installation.

4.1. Priprema

1. Turn off the main water supply to the bidet.
2. Očistite prostor za instalaciju i osigurajte da imate sav potreban alat.
3. Refer to the dimension diagram for precise measurements and clearances.

4.2. Koraci instalacije

1. Insert the bidet mixer into the single mounting hole on the bidet.
2. Secure the mixer from underneath the bidet using the provided mounting hardware. Ensure it is firmly tightened but do not overtighten.
3. Connect the flexible G3/8 connection hoses to the hot and cold water supply lines. Ensure proper sealing with washers.
4. Install the pop-up waste set. The waste set is designed for easy operation when filling or draining the basin. Connect the pull rod from the mixer to the pop-up mechanism.
5. Nakon što su svi priključci napravljeni, polako uključite glavni dovod vode i provjerite ima li curenja.
6. Test the mixer's function by operating the lever and checking water flow and temperature control.

Figure 2: Installation Dimensions. This diagram illustrates key measurements for installation. The overall height from the deck to the top of the mixer is 157mm, with the spout outlet at 127mm. The total height from the bottom of the connection to the top of the mixer is 420mm, with a maximum deck thickness of 45mm. The required mounting hole diameter is Ø34mm. The flexible connection hoses are G3/8. The pop-up waste connection is G1 1/4, with a waste diameter of Ø63mm and adjustable height between 35-45mm. The single lever handle has a movement range of 50 degrees in both directions.

5. Uputstvo za upotrebu

Your GROHE Start Loop Single-Lever Bidet Mixer is equipped with advanced technologies for comfort and efficiency.

• Kontrola protoka vode i temperature: The single lever allows for precise control over both water flow and temperature. Move the lever up to increase flow and down to decrease it. Move the lever left for hot water and right for cold water. The GROHE SilkMove technology ensures smooth and effortless handle movement.
• Ušteda vode: The integrated GROHE EcoJoy technology helps reduce water consumption without compromising performance, providing a perfect flow while saving water.
• Pop-up otpad: Operate the pop-up waste by pulling or pushing the small rod located at the back of the mixer.

6. Održavanje

To maintain the pristine appearance and functionality of your GROHE bidet mixer, follow these maintenance guidelines:

• čišćenje: Clean the chrome surfaces regularly with a soft cloth and a mild, non-abrasive cleaner. Avoid using harsh chemicals, abrasive sponges, or cleaners containing alcohol, acid, or ammonia, as these can damage the GROHE StarLight chrome coating.
• Održavanje aeratora: Periodically unscrew and clean the aerator (spout tip) to remove any mineral deposits or debris that may affect water flow.
• Opšta njega: Ensure no heavy objects are placed on the mixer and avoid any impacts that could damage the finish or internal components.

7. Otkrivanje problema

If you encounter any issues with your bidet mixer, refer to the following common troubleshooting steps:

• Nizak protok vode: Check if the main water supply is fully open. Clean the aerator for any blockages. Inspect the supply hoses for kinks.
• curenja: Ensure all connections are tightly secured. Check the condition of washers and O-rings. If leaks persist, professional assistance may be required.
• Problemi kontrole temperature: Verify that both hot and cold water supplies are active. If the issue persists, the cartridge may need inspection or replacement by a qualified technician.

For problems not resolved by these steps, please contact GROHE customer support or a certified plumber.

8. Specifikacije

9. Garancija i podrška

Your GROHE 23352000 Start Loop Single-Lever Bidet Mixer comes with a 5-godišnja garancija proizvođača, covering defects in materials and workmanship under normal use and service.

For warranty claims, technical assistance, or to purchase genuine GROHE spare parts, please contact GROHE customer support through their official weblokaciju ili ovlaštene servisne centre. Uvijek navedite broj modela (23352000) kada tražite podršku.

Posjetite službeni GROHE webweb mjesto za više informacija.