Fosmon HD8006 3-Gang 7.1 Surround Sound Distribution Home Theater Wall Plate User Manual

Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Fosmon HD8006 3-Gang 7.1 Surround Sound Distribution Home Theater Wall Plate. Please read this manual thoroughly before installation to ensure proper setup and optimal performance. Retain this manual for future reference.

Sigurnosne informacije

• Ensure power to the installation area is turned off before beginning any wiring to prevent electrical shock.
• Ovaj proizvod je dizajniran samo za upotrebu u zatvorenom prostoru.
• Do not expose the wall plate to moisture or extreme temperatures.
• Use appropriate tools for installation. If unsure, consult a qualified electrician or installer.
• The subwoofer connection is an RCA connector on both the front and back side.
• The HDMI connection is an HDMI connector on both the front and back side.
• Banana jacks do not work with paired/dual banana plugs. Only single/individual banana plugs are compatible.

Sadržaj paketa

• 1 x Fosmon HD8006 3-Gang 7.1 Surround Sound Distribution Home Theater Wall Plate
• Montažni vijci

Note: Gang box/mounting bracket is not included and must be purchased separately.

Karakteristike proizvoda

• 7.1 Surround Sound Support: Provides connections for 7 speakers (Front Left, Front Right, Center, Side Left, Side Right, Rear Left, Rear Right) and 1 subwoofer.
• HDMI priključak: Supports 4K@60Hz for high-resolution video signals.
• Pozlaćeni konektori: Ensures improved signal quality and corrosion resistance for all banana binding posts, RCA jack, and HDMI port.
• 3-Gang Design: Fits standard 3-gang electrical boxes, offering a clean and organized installation.
• Smanjeni nered kablova: Allows for in-wall cable routing, providing a neat home theater setup.

Postavljanje i instalacija

Follow these steps for proper installation of your Fosmon HD8006 wall plate. Ensure all power is disconnected before proceeding.

1. Pripremite prostor za instalaciju

• Turn off power to the circuit where you will be installing the wall plate.
• Install a standard 3-gang low-voltage mounting bracket or electrical box (not included) in your desired wall location. Ensure there is sufficient space behind the wall for cable routing.

Figure 1: The wall plate is compatible with a standard low-voltage 3-gang bracket (sold separately).

2. Route Cables

• Carefully route your speaker wires, subwoofer RCA cable, and HDMI cable through the wall to the opening of the mounting bracket. Leave enough slack for easy connection.

3. Connect Cables to the Wall Plate (Rear)

Slika 2: Pozadi view of the wall plate with binding posts, RCA, and HDMI connections.

• Žice zvučnika: For each speaker, connect the positive (+) and negative (-) wires to the corresponding banana binding posts on the rear of the wall plate. Unscrew the binding post cap, insert the bare wire or spade connector, and tighten the cap. Ensure correct polarity (red for positive, black for negative) for each speaker channel (Front Left, Front Right, Center, Side Left, Side Right, Rear Left, Rear Right).
• Subwoofer RCA: Connect your subwoofer RCA cable to the RCA jack on the rear of the wall plate.
• HDMI kabl: Connect your HDMI cable to the HDMI port on the rear of the wall plate.

Figure 3: Speaker wires connected to the rear of the wall plate's binding posts.

4. Montirajte zidnu ploču

• Carefully push the connected wall plate into the mounting bracket/electrical box.
• Secure the wall plate to the mounting bracket using the provided screws. Do not overtighten.

Figure 4: The Fosmon HD8006 wall plate installed, showing front connections.

Uputstvo za upotrebu

Once the Fosmon HD8006 wall plate is installed, you can connect your home theater components.

• Priključci zvučnika: Connect your speakers to the front banana binding posts using single banana plugs. Ensure each speaker is connected to its corresponding labeled post (e.g., Front Left speaker to "Front Left" post).
• Veza za subwoofer: Connect your subwoofer's RCA cable to the "Subwoofer" RCA jack on the front of the wall plate.
• HDMI veza: Connect your HDMI source device (e.g., Blu-ray player, gaming console) or display device (e.g., TV, projector) to the "HDMI" port on the front of the wall plate.

Figure 5: Banana plugs connected to the front of the wall plate for speaker connections.

Note: Always ensure proper polarity for speaker connections to maintain optimal audio performance.

Održavanje

• Keep the wall plate clean by wiping it with a soft, dry cloth.
• Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish or connectors.
• Periodically check all connections to ensure they are secure.

Rješavanje problema

Specifikacije

Garancija i podrška

Fosmon products typically come with a limited lifetime warranty. For warranty claims, technical support, or customer service inquiries, please visit the official Fosmon website or contact their customer support team. Please have your product model number (HD8006) and purchase information ready.

Online podrška: www.fosmon.com/support