Fluke 362 200A AC/DC prekidačamp Uputstvo za upotrebu brojila

1. Uvod

This manual provides essential instructions for the safe and effective operation, maintenance, and troubleshooting of your Fluke 362 200A AC/DC Clamp Meter. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

The Fluke 362 is a compact and versatile clamp meter designed for measuring AC and DC current up to 200A, AC and DC voltage up to 600V, resistance up to 3000 Ω, and continuity. Its ergonomic design and robust construction make it suitable for various electrical measurement tasks.

2. Sigurnosne informacije

WARNING: To prevent possible electrical shock, fire, or personal injury, read all safety information before you use the product.

• Uvijek se pridržavajte lokalnih i nacionalnih sigurnosnih propisa.
• Do not use the meter if it is damaged or operating abnormally.
• Provjerite je li funkcijski prekidač u ispravnom položaju za mjerenje koje se izvodi.
• Nemojte nanositi više od naznačenog volumenatage, kako je označeno na brojilu, između terminala ili između bilo kojeg terminala i uzemljenja.
• The Fluke 362 is rated for CAT III 600 V. This rating indicates suitability for measurements in distribution boards, circuit breakers, wiring, including cables, bus-bars, junction boxes, switches, and socket outlets in the fixed installation, and industrial use equipment.
• Budite oprezni kada radite sa voltagiznad 30 V AC RMS, 42 V peak ili 60 V DC. Ovi volumenitagpredstavljaju opasnost od strujnog udara.
• Remove test leads from the circuit before opening the battery cover.
• Zamijenite baterije kada se pojavi indikator slabe baterije kako biste osigurali tačna očitavanja.

3. Proizvod je gotovview

The Fluke 362 clamp meter features a robust design for reliable performance in various environments. Familiarize yourself with its components:

Slika 1: Prednja strana view of the Fluke 362 Clamp Meter, showing the display, function dial, jaw, and buttons.

Figure 2: The Fluke 362 Clamp Meter held in a gloved hand, illustrating its compact size and ergonomic design for single-hand operation.

Ključne komponente:

• Trenutni Clamp vilica: For non-contact AC/DC current measurements. Features an 18 mm triangular jaw for access in tight spaces.
• Funkcijski kotačić: Rotary switch to select measurement functions (AC/DC current, AC/DC voltage, otpor, kontinuitet).
• LCD ekran: Large, easy-to-read digital display for measurement results.
• Dugme HOLD: Zamrzava trenutno očitavanje na ekranu.
• Dugme ZERO: Used to clear the display for DC current measurements, compensating for any offset.
• Ulazni priključci: Za spajanje mjernih kabela za volumentagmjerenja e, otpora i kontinuiteta.

Ključne karakteristike:

• 200 A AC/DC current measurement capability.
• 600 V AC/DC voltagmogućnost mjerenja.
• 3000 Ω resistance range.
• Continuity detection with audible indicator.
• Zero function for accurate DC measurements.
• Data hold function to capture readings.
• Veliki, jasan ekran za jednostavno viewing.
• Compact and lightweight design for one-hand operation.
• CAT III 600 V safety rating.

4. Podešavanje

4.1 Instalacija baterije

The Fluke 362 is battery-powered. Although batteries are not included with all packages, they are required for operation. To install or replace batteries:

1. Ensure the meter is turned OFF and no test leads are connected.
2. Pronađite poklopac odjeljka za baterije na stražnjoj strani mjerača.
3. Koristite odvijač da biste otpustili vijak(e) koji pričvršćuju poklopac.
4. Uklonite poklopac i umetnite potrebne baterije, pazeći na ispravan polaritet (+/-).
5. Vratite poklopac baterije i zategnite vijke.

4.2 Spajanje mjernog kabela

Za voltage, resistance, and continuity measurements, connect the test leads to the input terminals:

• Insert the black test lead into the “COM” (common) terminal.
• Insert the red test lead into the “VΩ” (voltage/resistance) terminal.

5. Uputstvo za upotrebu

5.1 Uključivanje/isključivanje

Rotate the function dial from the “OFF” position to any desired measurement function to power on the meter. To power off, rotate the dial back to the “OFF” position.

5.2 Odabir funkcije

Use the rotary function dial to select the desired measurement mode (e.g., A∼ for AC current, A— for DC current, V∼ for AC voltage, V— for DC voltage, Ω for resistance, or continuity).

5.3 Mjerenje AC/DC struje (Clamp)

To measure current using the clamp vilica:

1. Rotate the function dial to A∼ (AC current) or A— (DC current).
2. For DC current measurements, press the “ZERO” button to clear any offset before clamping.
3. Otvorite clamp vilicu pritiskom na okidač.
4. Enclose only one conductor within the jaw. Ensure the jaw is fully closed.
5. Očitajte trenutnu vrijednost na displeju.

5.4 AC/DC Voltage Measurement

Za mjerenje voltage:

1. Spojite mjerne kablove kao što je opisano u Odjeljku 4.2.
2. Rotate the function dial to V∼ (AC voltage) or V— (DC voltagi).
3. Spojite mjerne sonde paralelno na strujno kolo ili komponentu koju želite mjeriti.
4. Pročitajte voltage vrijednost na ekranu.

5.5 Mjerenje otpora

Za mjerenje otpora:

1. Prije mjerenja otpora provjerite je li strujno kolo ili komponenta bez napona.
2. Spojite mjerne kablove kao što je opisano u Odjeljku 4.2.
3. Rotate the function dial to Ω (resistance).
4. Spojite ispitne sonde preko komponente.
5. Očitajte vrijednost otpora na zaslonu.

5.6 Test kontinuiteta

Da biste izvršili test kontinuiteta:

1. Osigurajte da je strujni krug ili komponenta bez napona.
2. Spojite mjerne kablove kao što je opisano u Odjeljku 4.2.
3. Rotate the function dial to the continuity position (often shared with resistance, indicated by a speaker icon).
4. Connect the test probes across the component or wire.
5. The meter will emit an audible tone if continuity is detected (resistance below a certain threshold).

5.7 Zero Function (DC Measurements)

The “ZERO” button is primarily used for DC current measurements. Before taking a DC current reading, with the clamp jaw open and no conductor inside, press the “ZERO” button to eliminate any residual offset and ensure accurate readings.

5.8 Funkcija zadržavanja podataka

Press the “HOLD” button to freeze the current reading on the display. This is useful for taking readings in hard-to-see locations. Press “HOLD” again to release the reading and return to live measurement.

6. Održavanje

6.1 Čišćenje

To clean the meter, wipe it with a damp krpom i blagim deterdžentom. Ne koristite abrazivna sredstva ili rastvarače. Prije upotrebe provjerite je li mjerač potpuno suh.

6.2 Zamjena baterije

When the low battery indicator appears on the display, replace the batteries promptly to maintain measurement accuracy. Refer to Section 4.1 for battery installation instructions.

6.3 Skladištenje

If the meter is not used for an extended period, remove the batteries to prevent leakage and damage. Store the meter in a dry, cool environment, away from direct sunlight and extreme temperatures.

7. Otkrivanje problema

If you encounter issues with your Fluke 362, refer to the table below for common problems and solutions:

If the problem persists after attempting these solutions, contact Fluke customer support.

8. Specifikacije

9. Garancija i podrška

Fluke products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Fluke webSačuvajte račun kao dokaz o kupovini.

For technical support, service, or calibration, please contact Fluke customer service through their official website or the contact information provided in your product packaging. When contacting support, please have your model number (Fluke 362) and serial number (if applicable) ready.