PROFLO PF5114M Jerrit Uputstvo za upotrebu vodokotlića za WC šolju

1. Uvod

This manual provides detailed instructions for the proper installation, operation, and maintenance of your PROFLO PF5114M Jerrit Toilet Tank. Please read all instructions thoroughly before beginning installation to ensure safe and correct setup. This product is designed to be paired with a compatible toilet bowl (sold separately).

2. Sigurnosne informacije

• Always turn off the water supply to the toilet before beginning any installation or maintenance.
• Tokom instalacije nosite odgovarajuću ličnu zaštitnu opremu, kao što su zaštitne naočale i rukavice.
• Pažljivo rukujte keramičkim komponentama kako biste spriječili njihovo krhotine ili lomljenje.
• Ensure all connections are secure to prevent leaks. Do not overtighten plastic nuts.
• Ako niste sigurni u vezi bilo kojeg dijela procesa instalacije, obratite se kvalificiranom vodoinstalateru.

3. Sadržaj paketa

Prije početka instalacije provjerite da li su sve komponente prisutne.

• PROFLO PF5114M Jerrit Toilet Tank (White)
• Poklopac spremnika
• Internal flush mechanism (pre-installed)
• Tank-to-bowl bolts and washers
• Tank-to-bowl gasket

Note: A toilet bowl and toilet seat are not included with this tank and must be purchased separately.

Slika 3.1: Prednja strana view of the PROFLO PF5114M Jerrit Toilet Tank, showing the white vitreous china construction and the flush lever on the left side.

4. Specifikacije

Image 4.1: Dimensional drawing of the PROFLO PF5114M Jerrit Toilet Tank, indicating a height of 14.75 inches, a depth of 8.5 inches, and a width of 15.75 inches.

5. Postavljanje i instalacija

This section outlines the general steps for installing the PROFLO PF5114M Jerrit Toilet Tank onto a compatible toilet bowl. Ensure the toilet bowl is already securely installed according to its manufacturer's instructions.

5.1 Priprema

1. Ensure the water supply valve is turned off and the toilet bowl is clean and dry where the tank will sit.
2. Inspect the tank and all components for any damage. Do not install if damaged.

5.2 Tank-to-Bowl Connection

1. Place the large rubber tank-to-bowl gasket over the flush valve shank on the underside of the tank. Ensure it is seated firmly and evenly.
2. Carefully align the tank over the bolt holes on the back of the toilet bowl. Lower the tank onto the bowl, ensuring the gasket creates a seal and the flush valve tailpiece passes through the opening in the bowl.
3. Insert the tank-to-bowl bolts through the holes in the tank and bowl. Secure them from underneath the bowl with washers and nuts. Tighten the nuts evenly, alternating between bolts, until the tank is snug and stable. Nemojte previše zategnuti, jer to može uzrokovati pucanje keramike.

5.3 Priključak za dovod vode

1. Connect the flexible water supply line (not included) from the shut-off valve to the fill valve shank on the underside of the tank. Hand-tighten first, then use a wrench for a final quarter-turn. Nemojte previše zategnuti.
2. Slowly turn on the water supply valve, checking for leaks at all connections.
3. Allow the tank to fill. Once full, check for any internal leaks or issues with the fill valve.

5.4 Završnih koraka

1. Test the flush mechanism several times to ensure proper operation.
2. Place the tank lid securely on top of the tank.

6. Operacija

The PROFLO PF5114M Jerrit Toilet Tank operates using a standard flush lever mechanism. To flush the toilet, simply press down on the flush lever located on the side of the tank. This action lifts the flapper or flush valve, allowing water to flow from the tank into the toilet bowl, initiating the flush cycle. Once the tank is empty, the flapper closes, and the fill valve refills the tank to the appropriate water level.

7. Održavanje

Regular maintenance helps ensure the longevity and efficient operation of your toilet tank.

7.1 Čišćenje

• Clean the exterior of the tank with a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive scrubbers, which can damage the ceramic finish.
• For internal cleaning, periodically add a toilet bowl cleaner designed for tanks (follow product instructions) or use a solution of white vinegar to help prevent mineral buildup.

7.2 Provjere curenja

• Regularly inspect the base of the tank and the water supply line connection for any signs of leaks.
• Check the flapper or flush valve for proper sealing. A worn flapper can cause continuous running water.

7.3 Unutrašnje komponente

• Periodically check the fill valve and flush valve for wear or damage. Replace components as needed with genuine PROFLO parts or compatible alternatives.
• Ensure the flush chain has the correct amount of slack; too much or too little can affect flushing performance.

8. Otkrivanje problema

This section addresses common issues you might encounter with your toilet tank.

9. Informacije o garanciji

PROFLO products are manufactured to high-quality standards. For specific warranty details regarding your PF5114M Jerrit Toilet Tank, please refer to the warranty documentation provided at the time of purchase or visit the official PROFLO webSačuvajte dokaz o kupovini za slučaj reklamacije.

10. Korisnička podrška

If you require further assistance, have questions about installation, or need to order replacement parts, please contact PROFLO customer support. Contact information can typically be found on the PROFLO webweb stranici ili na ambalaži vašeg proizvoda.

Za više informacija posjetite PROFLO trgovina na Amazonu.