Salus 091FLRF

Salus 091FLRF digitalni bežični sobni termostat - uputstvo za upotrebu

Model: 091FLRF | Brand: Salus

Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Salus 091FLRF Digital Wireless Room Thermostat. This advanced thermostat is designed to provide precise temperature control for your home, offering both convenience and energy efficiency through its programmable features. Please read this manual carefully before installation and use to ensure proper functionality and safety.

Salus 091FLRF Digital Wireless Room Thermostat and Receiver Unit

Image: The Salus 091FLRF digital wireless room thermostat (left) with its large display and control buttons, alongside its compact receiver unit (right).

Karakteristike

Setup

1. Raspakivanje

Carefully remove all components from the packaging. Verify that all parts are present: the thermostat unit, the receiver unit, and this user manual. Retain packaging for future transport or storage.

2. Identifikacija komponente

3. Battery Installation (Thermostat Unit)

The thermostat unit requires 2 x AA Alkaline batteries. Open the battery compartment on the back of the thermostat. Insert the batteries, ensuring correct polarity (+/-). Close the battery compartment securely.

4. Ožičenje prijemne jedinice

The receiver unit must be wired to your heating or cooling system. This process involves working with mains voltage (230V) and should only be performed by a qualified electrician to ensure safety and compliance with local regulations. Refer to the wiring diagram provided with the receiver unit for specific connection points. Ensure the main power supply to the heating/cooling system is switched off before commencing any wiring.

5. Pairing the Units

Once the receiver unit is wired and powered, and batteries are installed in the thermostat, the units may need to be paired. Follow these general steps:

  1. Uvjerite se da su obje jedinice uključene.
  2. Press and hold the pairing button on the receiver unit (refer to the receiver's specific instructions for location). The LED indicator on the receiver should flash.
  3. Within a short period, activate the pairing mode on the thermostat unit (consult the thermostat's specific instructions, often by pressing a combination of buttons or accessing a menu).
  4. The LED on the receiver should become solid, indicating successful pairing. The thermostat display may also show a confirmation message.

Uputstvo za upotrebu

1. Display Overview

The large LCD display shows various information:

2. Funkcije gumba

The thermostat typically features buttons for:

3. Podešavanje vremena i datuma

In the main display, press the SET button (or similar) to enter the time/date setting mode. Use the UP/DOWN arrows to adjust the hour, minute, and day. Press SET/OK to confirm each setting and move to the next.

4. Sedmični raspored programa

The thermostat offers 6 preset programs and 3 user-definable programs. To set a custom program:

  1. Press the PROG button to enter programming mode.
  2. Select one of the user-definable programs (e.g., P7, P8, P9) using the UP/DOWN arrows.
  3. Press SET/OK to begin editing the selected program.
  4. For each day of the week, define time periods and corresponding desired temperatures. Use UP/DOWN to adjust values and SET/OK to confirm.
  5. Repeat for all desired time periods and days.
  6. Exit programming mode by pressing PROG again or waiting for the thermostat to return to the main display automatically.

5. Ručno prebacivanje

To temporarily override the current program setting, simply use the UP/DOWN arrows to adjust the temperature. The thermostat will maintain this new temperature until the next programmed event or until manual override is cancelled (refer to specific thermostat instructions for cancellation).

6. Heating/Cooling Mode Selection

If your system supports both heating and cooling, you can typically switch between modes using a dedicated button or through the MODE menu. Ensure the correct mode is selected for your desired operation.

Održavanje

1. Čišćenje

Clean the thermostat and receiver units with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical agents, as these can damage the plastic components and electronic circuits. Keep the units free from dust and debris.

2. Zamjena baterije

When the low battery indicator appears on the thermostat display, replace the 2 x AA Alkaline batteries promptly. Refer to the 'Battery Installation' section for instructions. Dispose of old batteries according to local regulations.

Rješavanje problema

ProblemMogući uzrokRješenje
Displej termostata je prazan.Istrošene baterije.Replace the 2 x AA Alkaline batteries.
Receiver unit LED is off.Nema napajanja prijemnika.Check the mains power supply and wiring to the receiver unit. Consult a qualified electrician if unsure.
Heating/cooling system not responding.Units are not paired; receiver wiring issue; system fault.Re-pair the thermostat and receiver. Check receiver wiring. Ensure the heating/cooling system is operational.
Netačno očitavanje temperature.Thermostat placed in direct sunlight or near heat source/draft.Relocate the thermostat to a more suitable position, away from direct heat sources, sunlight, or drafts.
Thermostat loses settings.Niske baterije.Odmah zamijenite baterije.

Tehničke specifikacije

Salus 091FLRF Thermostat with detailed technical specifications table

Image: The Salus 091FLRF thermostat unit with a table detailing its technical specifications, including temperature ranges and dimensions.

SpecifikacijaVrijednost
ProizvođačSalus
Broj dijela091FLRF
StilClassic
Voltage230 V
Posebne karakteristikePodesivo
Tip kontroleKontrola dugmadi
Pozadinsko osvetljenjeDa
Raspon mjerenja temperature0 - 34.5 °C (0.5 °C step)
Raspon kontrole temperature5 - 30 °C (0.2 °C step)
Preciznost temperature+/- 1 ° C
Preciznost sata+/- 70 Seconds / Month
Preklopni diferencijal0.5 °C ili 1 °C
Control ModeHeating or Cooling System
Battery (Thermostat)2 x AA alkalne baterije
Dimenzije (termostat)154 x 80 x 30 mm
Radna temperatura0 - 40 °C
Temperatura skladištenja-20 do 60 °C

Garancija i podrška

This Salus product is designed for reliability and performance. For information regarding the warranty period and terms, please refer to the warranty card included with your product or visit the official Salus website. In case of technical issues or questions not covered in this manual, please contact Salus customer support or your local distributor for assistance. Do not attempt to repair the unit yourself, as this may void the warranty and pose safety risks.

For further support, please visit the official Salus webstranice ili kontaktirajte njihov odjel za korisničku podršku.

Povezani dokumenti - 091FLRF

Preview Kratki vodič za programabilni termostat SALUS 091FLv2/091FLRFv2
Korisnički priručnik za programabilne termostate SALUS 091FLv2 i 091FLRFv2, s detaljnim opisom instalacije, karakteristika i rada za efikasnu kontrolu grijanja i hlađenja.
Preview Salus 091FLv2/091FLRFv2 Digitalni programabilni termostat - Korisnički priručnik
Sveobuhvatan vodič za digitalne programabilne termostate Salus 091FLv2 i 091FLRFv2, koji obuhvata instalaciju, podešavanje, programiranje i opcije servisnog menija za efikasnu kontrolu grijanja i hlađenja.
Preview SALUS HTR230(20) Žičani Elektronski Termostat - Uputstvo za upotrebu
Sveobuhvatno korisničko uputstvo za neprogramabilni žični elektronski termostat SALUS HTR230(20). Pruža detaljne informacije o instalaciji, radu, funkcijama poput noćnog podešavanja temperature (NSB) i zaštite ventila, postavkama kratkospojnika i tehničkim specifikacijama za sisteme grijanja i hlađenja.
Preview Kratki vodič za digitalni programabilni termostat SALUS T105/T105RF
Korisnički priručnik i kratki vodič za digitalne programabilne termostate SALUS T105 i T105RF, koji pokriva instalaciju, rad, programiranje i tehničke specifikacije.
Preview Salus RT520 | RT520RF Programabilni termostati sa OpenTherm-om
Istražite programabilne termostate Salus RT520 (žični) i RT520RF (bežični), dizajnirane za efikasnu i inteligentnu kontrolu grijanja. Posjeduju OpenTherm protokol, TPI algoritam i jednostavna podešavanja za korištenje.
Preview Salus iT500 Internet termostat: Korisnički priručnik
Sveobuhvatno korisničko uputstvo za Salus iT500 internet termostat, koje obuhvata instalaciju, programiranje, funkcije i sistemske komponente za pametno grijanje doma i kontrolu tople vode.