1. Uvod
This user manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of the Pedrollo Top Multi 2 multi-stage submersible electric pump. This pump is specifically designed for handling clear water in various applications, including domestic, agricultural, and industrial uses. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of the product.
2. Sigurnosne informacije
Always adhere to local regulations and safety standards when installing, operating, or maintaining the pump. Failure to do so may result in injury, damage to the equipment, or property damage.
- električna sigurnost: Ensure the power supply matches the pump's specifications (220 Volts, Monophase). All electrical connections must be performed by a qualified electrician and comply with national and local electrical codes. Disconnect power before any installation or maintenance.
- Sigurnost vode: This pump is designed for clear water. Do not use it for flammable, corrosive, or explosive liquids.
- Rukovanje: The pump weighs approximately 9.4 kg. Use appropriate lifting techniques or assistance when moving the pump to prevent injury.
- Djeca i neovlašteno osoblje: Držite djecu i neovlašteno osoblje dalje od pumpe tokom rada.
- Zaštita od pregrijavanja: The pump is equipped with thermal protection. If the pump stops unexpectedly, allow it to cool down before attempting to restart.
3. Proizvod je gotovview

Image: Pedrollo Top Multi 2 Electric Submersible Pump. This image displays the orange and black submersible pump with its power cable and discharge outlet. The 'TOP MULTI' and 'pedrollo' logos are visible on the side.
The Pedrollo Top Multi 2 is a robust multi-stage submersible pump. Key features include:
- Flow rate up to 80 liters per minute (4.8 m3/h).
- Discharge head up to 42 meters.
- Motor power of 0.55 kW (0.75 HP).
- Constructed with technopolymer for durability.
4. Postavljanje i instalacija
4.1 Raspakivanje i pregled
- Pažljivo izvadite pumpu iz ambalaže.
- Inspect the pump for any visible damage that may have occurred during transit. Do not install if damaged.
- Provjerite da li su prisutne sve komponente navedene na listi za pakovanje.
4.2 Električni priključak
- Ensure the power supply is 220 Volts, Monophase, and has adequate current capacity for a 0.75 HP motor.
- Connect the pump to a grounded electrical outlet protected by a residual current device (RCD) for safety.
- Do not use extension cords unless absolutely necessary, and ensure they are rated for outdoor use and the pump's power requirements.
4.3 Placement and Submersion
- The pump must be fully submerged in clear water during operation. Ensure the water level is above the minimum operating level indicated on the pump or in the technical specifications.
- Position the pump on a stable, flat surface to prevent it from tipping over. Avoid placing it directly on muddy or sandy bottoms to prevent clogging.
- Connect the discharge hose or pipe securely to the pump's outlet. Ensure there are no kinks or obstructions in the discharge line.
5. Uputstvo za upotrebu
5.1 Prvo pokretanje
- Before starting, ensure the pump is correctly installed and fully submerged.
- Connect the pump to the power supply. The pump should start automatically if equipped with a float switch, or manually if not.
- Observe the pump for the first few minutes of operation to ensure it is pumping water smoothly and without unusual noises or vibrations.
5.2 Normalan rad
- The pump is designed for continuous operation within its specified limits.
- Monitor the water level to ensure the pump remains submerged. Running the pump dry will cause severe damage.
- The maximum flow rate is 7200 Liters per hour, and the maximum pressure is 4.2 Bars. Do not exceed these limits.
6. Održavanje
Regular maintenance ensures optimal performance and extends the life of your pump. Always disconnect the pump from the power supply before performing any maintenance.
6.1 Redovne provjere
- Periodically check the power cable for any signs of damage or wear.
- Inspect the pump's intake screen for blockages from debris.
- Ensure the float switch (if present) moves freely and is not obstructed.
6.2 Čišćenje
- If the pump's performance decreases, it may be due to debris accumulation. Remove the pump from the water and clean the intake screen and impeller area.
- Use clear water to rinse off any dirt or sediment. Do not use harsh chemicals or abrasive materials.
6.3 Skladištenje
- If the pump will not be used for an extended period, especially in freezing temperatures, drain all water from the pump and hoses.
- Pumpu čuvajte na suhom mjestu, zaštićenom od mraza.
7. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Pumpa se ne pokreće | No power supply; Thermal overload activated; Float switch stuck; Impeller jammed. | Check power connection and circuit breaker; Allow pump to cool down; Check float switch position; Clean impeller area. |
| Pumpa radi, ali se voda ne ispušta ili je protok nizak | Intake screen clogged; Discharge hose kinked or blocked; Water level too low; Air lock. | Clean intake screen; Clear hose obstruction; Ensure pump is fully submerged; Tilt pump to release air. |
| Pumpa se često zaustavlja | Thermal overload due to overheating; Water level fluctuating; Debris interfering with float switch. | Check for blockages; Ensure adequate water level; Clean float switch area. |
| Neobična buka ili vibracija | Debris in impeller; Pump not stable; Worn bearings (professional service required). | Clean impeller; Secure pump on a stable surface; Contact qualified technician. |
8. Specifikacije
| Atribut | Vrijednost |
|---|---|
| Proizvođač | PEDROLLO |
| Brand | Pedrollo |
| Model Reference | PSG 48TPM070A1U |
| Boja | Crveni |
| Materijal | Tehnopolimer |
| Vrsta napajanja | Monofaza |
| Voltage | 220 Volts |
| konjske snage (HP) | 0.75 |
| Količina artikala | 1 |
| Maksimalni protok | 7200 litara na sat |
| Maksimalni pritisak | 4.2 Barova |
| Dimenzije paketa | 41 x 24 x 20 cm; 9.4 kilogram |
| ASIN | B00ITSN0ZC |
| UPC | 662425080472 |
| Dostupnost rezervnih dijelova | Informacije o rezervnim dijelovima nisu dostupne |
9. Garancija i podrška
Specific warranty information for the Pedrollo Top Multi 2 pump is not provided in the product details. Please refer to the warranty card included with your purchase or contact the retailer or manufacturer directly for details regarding warranty coverage and terms.
For technical support, spare parts, or service inquiries, please contact your authorized Pedrollo dealer or the seller from whom you purchased the product. Provide your model number (PSG 48TPM070A1U) and serial number (if applicable) when seeking assistance.





