Nilfisk MC 7P-195/1280 FA 400/3/50 EU High-Pressure Washer User Manual

1. Uvod

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Nilfisk MC 7P-195/1280 FA 400/3/50 EU high-pressure washer. Please read this manual thoroughly before operating the unit to ensure proper use and to prevent injury or damage.

2. Sigurnosne informacije

Uvijek se pridržavajte osnovnih sigurnosnih mjera opreza prilikom korištenja ovog proizvoda kako biste smanjili rizik od ozljeda ili oštećenja. Nepoštivanje ovih uputa može dovesti do ozbiljnih ozljeda ili materijalne štete.

• Pročitajte sva uputstva: Upoznajte se s kontrolama i pravilnom upotrebom opreme.
• električna sigurnost: Ensure the power supply matches the specifications on the product label. Always use a ground fault circuit interrupter (GFCI) for electrical connections. Do not operate with damaged cords or plugs.
• Pritisak vode: High-pressure jets can be dangerous if misused. Never direct the water jet at people, animals, electrical equipment, or the unit itself.
• Lična zaštitna oprema (PPE): Uvijek nosite odgovarajuću zaštitu za oči, zaštitu za sluh i zaštitnu odjeću prilikom rukovanja peračem pod pritiskom.
• Stabilnost: Operate the unit on a stable, level surface to prevent tipping.
• Djeca i kućni ljubimci: Držite djecu i kućne ljubimce podalje od operativnog područja.
• Održavanje: Isključite napajanje prije obavljanja bilo kakvog održavanja ili čišćenja.

3. Podešavanje

3.1 Raspakivanje

Carefully remove all components from the packaging. Check for any damage that may have occurred during transit. Retain packaging materials for future storage or transport.

3.2 Montaža

Assemble the handle and wheels according to the diagrams provided in the separate assembly guide. Ensure all connections are secure.

Slika 1: Front view of the Nilfisk MC 7P high-pressure washer. This image displays the unit's robust blue casing, large rear wheels, and a smaller front swivel wheel for maneuverability. The black handle extends upwards, and the spray gun with its hose is neatly stored on the side. Visible connections for water inlet and high-pressure outlet are located at the base of the unit.

3.3 Priključak za dovod vode

1. Spojite vrtno crijevo (minimalnog promjera 1,25 cm) na dovod vode na peraču pod pritiskom. Provjerite je li dovod vode čist i bez ostataka.
2. Connect the high-pressure hose to the high-pressure outlet on the unit and to the spray gun. Tighten all connections securely to prevent leaks.
3. Turn on the water supply fully to the pressure washer. Allow water to flow through the pump and hose to purge any air before starting the motor.

3.4 Električni priključak

Connect the power cord to a grounded electrical outlet that matches the voltage and frequency specifications of the unit (400V/3/50 EU). Ensure the circuit is protected by a GFCI.

4. Uputstvo za upotrebu

4.1 Prije upotrebe

• Ensure all hoses are properly connected and secured.
• Check that the water supply is fully open and free of kinks.
• Odaberite odgovarajuću mlaznicu za vaš zadatak čišćenja.

4.2 Pokretanje uređaja

1. With the water supply on, squeeze the trigger on the spray gun to release any remaining air from the system.
2. Turn the ON/OFF switch to the 'ON' position. The motor will start.
3. Release the trigger to allow the unit to build pressure.

4.3 Operacija

• Uvijek čvrsto držite pištolj za prskanje s obje ruke tokom rada.
• Održavajte sigurnu udaljenost od površine koja se čisti kako biste izbjegli oštećenja.
• Pomičite pištolj za prskanje širokim pokretima kako biste osigurali ravnomjerno čišćenje.
• For detergent application, refer to the specific instructions for your detergent injector system (if equipped).

4.4 Isključivanje

1. Okrenite prekidač za UKLJUČENO/ISKLJUČENO u položaj 'ISKLJUČENO'.
2. Isključite dovod vode.
3. Stisnite okidač pištolja za prskanje kako biste ispustili preostali pritisak u sistemu.
4. Odspojite visokotlačno crijevo i vrtno crijevo.

5. Održavanje

Redovno održavanje osigurava dugotrajnost i optimalne performanse vašeg perača pod pritiskom.

5.1 Redovno čišćenje

• Obrišite vanjski dio jedinice s oglasomamp krpom nakon svake upotrebe.
• Ensure the nozzles are clear of blockages. Use the provided nozzle cleaning tool if necessary.

5.2 Održavanje filtera

• Povremeno provjeravajte i čistite filter za dovod vode kako biste spriječili ulazak prljavštine u pumpu.
• Replace the filter if it is damaged or excessively clogged.

5.3 Skladištenje

• Before storing, ensure all water is drained from the pump, hoses, and spray gun to prevent freezing damage.
• Čuvajte visokotlačni perač u suvom okruženju bez mraza.
• Coil hoses neatly and store the spray gun and nozzles securely.

6. Otkrivanje problema

Ovaj odjeljak opisuje uobičajene probleme i njihova moguća rješenja.

7. Specifikacije

8. Garancija i podrška

For warranty information, please refer to the separate warranty card included with your product or visit the official Nilfisk website. For technical support, spare parts, or service inquiries, please contact your authorized Nilfisk dealer or customer service center. Keep your purchase receipt and model number handy for faster service.

Nilfisk službenik Webstranica: www.nilfisk.com