Grasslin by Intermatic FM1D14-AV-U Digitalni tajmer Uputstvo za upotrebu

Uvod

This manual provides detailed instructions for the installation, programming, and operation of the Grasslin by Intermatic FM1D14-AV-U Digital Timer. This one-circuit panel mount timer is designed for 24-hour or 7-day applications, offering precise control over electrical loads. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Sigurnosne informacije

WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installing or servicing. All wiring should be performed by a qualified electrician and comply with local and national electrical codes.

• Do not exceed the electrical ratings of the device.
• Uvjerite se da su svi priključci sigurni i pravilno izolirani.
• This device is intended for indoor use in a dry location unless otherwise specified by its enclosure rating.
• Držite djecu dalje od električnih uređaja.

Product Overview

The FM1D14-AV-U is a versatile digital timer featuring a single circuit for controlling various electrical applications. Key features include:

• 14 Set Point Programs: Allows for flexible scheduling over 24 hours or 7 days.
• Ručno poništavanje: Provides temporary control without altering programmed settings.
• Rezervna baterija za punjenje: Maintains time and program settings during power outages for up to 2500 hours.
• 5 Preset Adjustable Block Programs: Simplifies common scheduling needs.
• Voltage Kompatibilnost: Radi na 120-277VAC, 50/60Hz.
• Montaža: Dizajniran za montažu na panel.

Slika: Front view of the FM1D14-AV-U Digital Timer, showing the display and control buttons. This timer is designed for panel mounting and offers digital programming capabilities.

Postavljanje i instalacija

The FM1D14-AV-U timer is designed for panel mounting. Follow these general steps for installation. Refer to the wiring diagram provided with the product for specific connection details.

1. Isključivanje struje: Before beginning any installation, ensure that power to the circuit is completely disconnected at the main service panel (breaker or fuse box). Verify with a voltage tester.
2. Montaža: Mount the timer securely into a suitable panel cutout. Ensure adequate clearance for wiring and ventilation. The timer's dimensions are approximately 1.26"D x 2.36"W x 2.36"H.
3. Ožičenje: Connect the timer according to the wiring diagram. This device supports 120-277VAC, 50/60Hz. Ensure proper connection of line, load, and neutral wires. The timer features a SPDT (Single Pole Double Throw) switch style.
4. Aktivacija baterije: The internal rechargeable battery provides backup for settings. It will charge automatically once power is applied to the timer.
5. Obnova napajanja: Nakon što su svi priključci sigurni i provjereni, vratite napajanje u strujno kolo.

For detailed wiring diagrams, consult the documentation included in the product packaging or visit the official Intermatic support website.

Uputstvo za upotrebu

The FM1D14-AV-U timer offers intuitive programming for various scheduling needs.

Postavljanje trenutnog vremena i datuma

Prilikom prvog uključivanja ili nakon dužeg nestanka strujetage (beyond battery backup), you may need to set the current time and date. Refer to the on-screen prompts or the specific button sequence outlined in the full product manual.

Programming ON/OFF Events (14 Set Points)

The timer allows for up to 14 individual ON/OFF programs. Each program can be set for specific times and days of the week.

1. Access the programming mode using the designated button (e.g., "PROG" or "MENU").
2. Select a program number (P1-P14).
3. Set the desired ON time for the program.
4. Select the days of the week for this ON event (e.g., Mon-Fri, Daily, or specific days).
5. Set the desired OFF time for the same program.
6. Select the days of the week for this OFF event.
7. Ponovite za dodatne programe po potrebi.
8. Exit programming mode to save settings.

Using Preset Adjustable Block Programs

The timer includes 5 preset block programs for common scheduling patterns. These can be adjusted to fit specific requirements.

• Consult the full manual for details on selecting and customizing these block programs.

Manual Override

To temporarily change the timer's output state without affecting the programmed schedule, use the manual override function. This is typically done via a dedicated button (e.g., "MANUAL" or "OVERRIDE"). The display will usually indicate the current status (ON/OFF) and if it's in manual override mode.

Održavanje

The Grasslin by Intermatic FM1D14-AV-U Digital Timer requires minimal maintenance.

• čišćenje: Periodically wipe the exterior of the timer with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• baterija: The internal rechargeable battery is designed for long life and typically does not require replacement. If the timer consistently loses time or program settings during power outages, the battery may be nearing the end of its life. Contact customer support for service options.
• inspekcija: Annually inspect the timer and its wiring for any signs of damage, loose connections, or overheating.

Rješavanje problema

Specifikacije

Garancija i podrška

For warranty information, technical support, or service inquiries, please contact Intermatic customer service. Keep your purchase receipt as proof of purchase.

Intermatic Contact Information:

• Refer to the official Intermatic webnajnovije kontakt podatke potražite na lokaciji ili pakovanju proizvoda.
• Online resources, FAQs, and additional documentation may be available on the manufacturer's website.