PAC LCGM29

PAC LCGM29 Radio Replacement Interface User Manual

Model: LCGM29

Uvod

This manual provides instructions for the installation and operation of the PAC LCGM29 Radio Replacement Interface. This interface is designed to retain essential vehicle features when replacing the factory radio in select non-amplified 29-Bit LAN GM vehicles without Bose or OnStar systems.

PAC LCGM29 Radio Replacement Interface module and wiring harness
This image displays the PAC LCGM29 interface module alongside its multi-colored wiring harness, ready for connection to a vehicle's electrical system and an aftermarket radio.

Ključne karakteristike

  • Retains all safety warning chimes when the factory radio is replaced.
  • Provides 10-minute Retained Accessory Power (RAP) output.
  • In-package updatable using the PAC-UP.
  • Includes 14-Pin & 16-pin connectors.

Kompatibilnost vozila

The LCGM29 interface is compatible with select General Motors (GM) vehicles equipped with a 29-Bit LAN system and without factory Bose or OnStar audio systems. It is designed for non-amplified vehicle sound systems.

Sadržaj paketa

  • Radio Replacement Interface (LCGM29 module and wiring harness)
Close-up of PAC LCGM29 module label
Krupni plan view of the PAC LCGM29 module, clearly showing the 'LCGM29' model designation printed on its label.

Uputstva za instalaciju

Važno: Professional installation is recommended. Disconnect the vehicle's negative battery terminal before beginning installation.

  1. Remove the factory radio from the vehicle dashboard.
  2. Connect the PAC LCGM29 wiring harness to the aftermarket radio's wiring harness according to the wiring diagram provided with your aftermarket radio and the LCGM29.
  3. Connect the vehicle-specific connector from the LCGM29 harness to the vehicle's factory radio harness.
  4. Connect the LCGM29 module to its corresponding connector on the harness.
  5. Secure the LCGM29 module and excess wiring in a safe location behind the dashboard, away from moving parts or heat sources.
  6. Reinstall the aftermarket radio into the dashboard.
  7. Ponovo spojite negativni pol akumulatora vozila.
  8. Test all functions of the aftermarket radio and vehicle chimes.

Uputstvo za upotrebu

The PAC LCGM29 operates automatically once installed. It ensures that safety warning chimes function correctly and provides retained accessory power (RAP) for a period after the ignition is turned off, mimicking the factory radio's behavior.

  • Zadržana pomoćna snaga (RAP): After turning off the ignition, the aftermarket radio will remain powered for approximately 10 minutes or until a vehicle door is opened, whichever occurs first.
  • Safety Chimes: All factory safety warning chimes (e.g., seatbelt, door ajar, low fuel) will be retained and function through the vehicle's audio system.

Održavanje

The PAC LCGM29 interface is designed for maintenance-free operation. Ensure all connections are secure during installation. No user-serviceable parts are inside the module.

  • Keep the module free from moisture and extreme temperatures.
  • Do not attempt to open or modify the module, as this will void the warranty.

Rješavanje problema

IssueMogući uzrokRješenje
No audio from aftermarket radio.Neispravne veze ožičenja.Verify all wiring connections between the LCGM29, aftermarket radio, and vehicle harness.
No safety chimes.LCGM29 module not powered or faulty.Check power connections to the LCGM29. Ensure the module is securely connected to its harness.
Retained Accessory Power (RAP) not functioning.Incorrect wiring or vehicle specific issue.Confirm the accessory wire from the LCGM29 is correctly connected to the aftermarket radio.
Vehicle battery drain.Incorrect wiring or module malfunction.Ensure all connections are correct and secure. If the issue persists, contact technical support.

For further assistance, refer to the PAC webstranice ili kontaktirajte tehničku podršku.

Specifikacije

  • Brand: PAC
  • Model: LCGM29
  • Materijal: Copper (Core), Polyvinyl Chloride (PVC) (Jacket)
  • Dimenzije artikla (D x Š x V): 12 x 1 x 5 inča
  • Težina artikla: 3.2 unce
  • Tip konektora: IDC, 3.5mm Jack or 3.5mm Mini-phone
  • Kompatibilnost: Select Non-Amplified 29-Bit LAN GM Vehicles (without Bose or OnStar)

Pravno odricanje od odgovornosti

Ovaj proizvod sadrži kemikalije za koje je u državi Kalifornija poznato da uzrokuju rak i urođene mane ili druge reproduktivne štete.

Podrška i garancija

For technical support or warranty information, please visit the official PAC webweb-mjesto ili kontaktirajte njihovu službu za korisnike. Sačuvajte račun za kupovinu u slučaju reklamacije.

Povezani dokumenti - LCGM29

Preview BCI-GM31: Interfejs za otključavanje navigacije i kameru za vožnju unazad za GM vozila
Uputstvo za instalaciju i upotrebu PAC BCI-GM31, GM LAN 29-bitnog interfejsa za omogućavanje otključavanja navigacije i funkcija kamere za vožnju unazad za putnike.
Preview Vodič za instalaciju zamjenskog interfejsa za PAC C2R-GM11b GM radio
Comprehensive installation guide for the PAC C2R-GM11b, a radio replacement interface for GM GMLAN 11-bit vehicles without OnStar. This interface retains factory warning chimes, turn signal indicators, and the Retained Accessory Power (RAP) feature, while enabling aftermarket stereo installation.
Preview PAC GM6A-RST Radio Replacement Interface for GM Vehicles - Installation & Features
Detailed guide for the PAC GM6A-RST Radio Replacement Interface for General Motors vehicles (29-bit V2). Covers installation, wiring, SWC programming, VS41 camera integration, and RadioPRO PC App usage. Retains factory features like BOSE, OnStar, and steering wheel controls.
Preview PAC RP4.2-BM21 Zamjena za radio i interfejs za upravljanje volanom za BMW vozila - Vodič za instalaciju
Sveobuhvatni vodič za instalaciju PAC RP4.2-BM21 zamjenskog radija i interfejsa za upravljanje volanom za odabrana BMW vozila sa CAN-Busom. Zadržite fabričke karakteristike, programirajte SWC dugmad i koristite izlaze sabirnice podataka pomoću ovog naprednog interfejsa.
Preview AP4-FD32 Napredno AmpInterfejs za spašavanje zraka za odabrana Ford vozila
Korisnički priručnik i vodič za instalaciju za AP4-FD32 Advanced AmpInterfejs za održavanje, dizajniran za odabrana Ford vozila sa A2B premium zvučnim sistemima. Saznajte više o karakteristikama, ožičenju, podešavanju, konfiguraciji i rješavanju problema.
Preview Vodič za zamjenu radija PAC CH1A-RSX i instalaciju interfejsa za upravljanje na volanu
Ovaj vodič pruža upute za instalaciju PAC CH1A-RSX interfejsa, omogućavajući zamjenu radija i zadržavanje kontrola na volanu u vozilima Chrysler, Dodge i Jeep sa specifičnim radio uređajima sa podatkovnom sabirnicom. Obuhvata ožičenje, programiranje i verifikaciju funkcija.