Westinghouse 0471300 100W T4 GY8.6 Halogen Light Bulb User Manual

Uvod

This manual provides instructions for the safe installation, operation, and maintenance of the Westinghouse 0471300 100W T4 GY8.6 Halogen Light Bulb. Please read all instructions carefully before use to ensure proper function and safety.

Image: A Westinghouse 0471300 100W T4 GY8.6 Halogen Light Bulb, showing its compact T4 shape and two-pin GY8.6 base.

Sigurnosne informacije

Pridržavajte se sljedećih sigurnosnih mjera opreza kako biste spriječili ozljede ili štetu:

• Iskljuciti: Always ensure the power supply to the fixture is turned off before installing, removing, or cleaning the bulb.
• Pažljivo rukujte: Halogene sijalice rade na visokim temperaturama. Ostavite sijalicu da se potpuno ohladi prije rukovanja.
• Izbjegavajte kontakt sa kožom: Do not touch the glass portion of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature bulb failure. Use a clean cloth or gloves when handling.
• Proper Fixture: Use this bulb only in fixtures designed for 100W, 120V, GY8.6 base halogen bulbs. Ensure the fixture has adequate ventilation.
• odlaganje: Iskorišćene sijalice odložite u skladu s lokalnim propisima.

Postavljanje i instalacija

1. Isključite napajanje: Locate the light switch or circuit breaker controlling the fixture and turn off the power.
2. Dozvoli hlađenje: If replacing an old bulb, allow it to cool down completely before touching.
3. Uklonite staru sijalicu: Carefully pull the old bulb straight out from its GY8.6 base socket.
4. Rukujte novom sijalicom: Using a clean, dry cloth or gloves, carefully remove the new Westinghouse 0471300 bulb from its packaging. Avoid touching the glass with bare hands.
5. Umetnite novu žarulju: Align the two pins of the GY8.6 base with the holes in the socket. Gently push the bulb straight into the socket until it is fully seated. Do not force the bulb.
6. Vrati snagu: Turn the power supply back on at the switch or circuit breaker.

Uputstvo za upotrebu

The Westinghouse 0471300 halogen bulb operates like a standard light bulb. Once properly installed and power is restored:

• On/Off: Use the fixture's switch to turn the light on or off.
• Funkcija zatamnjivanja: This bulb is dimmable. If your fixture is connected to a compatible dimmer switch, you can adjust the light output. Ensure your dimmer switch is rated for halogen bulbs and the total wattage of bulbs connected.

Održavanje

Minimal maintenance is required for this halogen bulb:

• čišćenje: If the bulb requires cleaning, ensure the power is off and the bulb is cool. Gently wipe the glass with a clean, dry, lint-free cloth. Do not use liquid cleaners.
• Zamjena: When the bulb reaches the end of its lifespan (approximately 1500 hours) or burns out, follow the 'Setup and Installation' steps to replace it with a new, compatible bulb.

Rješavanje problema

If the bulb does not light or exhibits unusual behavior, consider the following:

• Sijalica ne pali:
  • Proverite da li je prekidač za napajanje uključen.
  • Provjerite da li je prekidač strujnog kruga isključen.
  • Ensure the bulb is fully and correctly seated in the socket.
  • Test the bulb in another known working fixture, if possible, or try a new bulb in the current fixture to rule out a faulty bulb or fixture.
• Kratak vijek trajanja:
  • Ensure the bulb was handled with a clean cloth or gloves during installation to avoid skin oils on the glass.
  • Verify that the fixture provides adequate ventilation to prevent overheating.
  • Potvrdite voltage supplied to the fixture matches the bulb's rated voltage (120 V).

Specifikacije

Garancija i podrška

For warranty information and customer support, please refer to the documentation provided with your purchase or contact Westinghouse directly. You can also visit the official Westinghouse store for more product details and support resources.

Visit the Westinghouse Store