Raymarine ST4000MK2 Wheel Drive Installation and Maintenance Guide

1. Uvod

This manual provides essential instructions for the proper installation, operation, and maintenance of your Raymarine ST4000MK2 Wheel Drive. This unit is designed to integrate with a complete autopilot system and is not a standalone pilot. Please read this guide thoroughly before proceeding with installation or use to ensure safe and efficient performance.

2. Sigurnosne informacije

• Uvijek isključite napajanje prije instalacije ili održavanja.
• Ensure all connections are secure and waterproof to prevent damage.
• Ako niste sigurni u vezi s bilo kojim koracima instalacije, obratite se kvalificiranom pomorskom tehničaru.
• This device is part of a larger system; refer to your main autopilot unit's manual for complete operational safety guidelines.

3. Šta se nalazi u kutiji

Prilikom raspakivanja, provjerite da li su sve komponente prisutne:

• Raymarine ST4000MK2 Wheel Drive Unit
• Pribor za montažu (vijci, podloške, matice)
• Uputstvo za upotrebu (ovaj dokument)

Slika 1: Raymarine ST4000MK2 Wheel Drive unit. This image shows the main wheel drive component.

4. Vodič za instalaciju

The following steps detail the installation process for the ST4000MK2 Wheel Drive. For a visual guide, please refer to the installation video below.

4.1 Disassembly (if replacing an old unit)

1. Uklonite staru jedinicu: Carefully unscrew and remove the existing wheel drive unit from the steering wheel.
2. Detach Components: Separate the main drive ring from the mounting plate. Remove any rubber or plastic components from the old unit.
3. Čisto područje: Ensure the mounting surface on the steering wheel is clean and free of debris.

4.2 Reassembly and New Unit Installation

1. Attach Rubber Ring: Place the rubber ring onto the inner part of the new wheel drive unit. Ensure it slides on smoothly and is seated correctly.
2. Secure Drive Ring: Position the main drive ring onto the mounting plate. Ensure all internal components are properly aligned and seated.
3. Align Arrows: Locate the alignment arrows on both the inner and outer parts of the wheel drive unit. Carefully align these arrows to ensure proper fitment and function. This alignment is crucial for the mounting holes to match up correctly.
4. Mount to Steering Wheel: Place the assembled wheel drive unit onto the boat's steering wheel. Ensure the mounting holes on the wheel drive align with the spokes or mounting points on your steering wheel.
5. Zategnite pričvršćivače: Secure the wheel drive unit to the steering wheel using the provided fasteners. Tighten all screws evenly to ensure a snug and stable fit. Do not overtighten.
6. Konačna provjera: Once installed, manually rotate the steering wheel to confirm smooth operation and ensure there is no binding or excessive play in the wheel drive unit.

5. Uputstvo za upotrebu

The Raymarine ST4000MK2 Wheel Drive is a component of a larger autopilot system. Its operation is controlled by the main autopilot head unit (sold separately). Refer to your autopilot system's user manual for detailed operating instructions, including engaging/disengaging the autopilot, setting courses, and adjusting parameters.

Ensure the wheel drive is securely engaged before activating the autopilot. Disengage the autopilot before manually steering the vessel.

6. Održavanje

• Redovni pregled: Periodically inspect the wheel drive unit for any signs of wear, damage, or loose fasteners.
• čišćenje: Clean the unit with fresh water and a soft cloth to remove salt, dirt, and other marine contaminants. Avoid using harsh chemicals or abrasive cleaners.
• podmazivanje: Consult your main autopilot manual for any specific lubrication requirements for the drive mechanism.
• Provjera kablova: Inspect the electrical cables for chafing or damage. Ensure connections remain tight and corrosion-free.

7. Otkrivanje problema

• Unit Not Engaging: Check all electrical connections and ensure the main autopilot unit is powered on and functioning correctly. Verify the wheel drive is properly installed and aligned.
• Neobična buka/vibracije: Inspect the unit for loose components or foreign objects. Ensure the drive belt (if applicable) is correctly tensioned and free from damage.
• Nepravilno upravljanje: This may indicate an issue with the main autopilot computer or sensor. Refer to your autopilot system's manual for diagnostic steps.
• Problemi sa napajanjem: Check the vessel's power supply and circuit breakers. Ensure the autopilot system is receiving adequate voltage.

8. Specifikacije

9. Informacije o garanciji

This product comes with a standard manufacturer's warranty. For specific details regarding coverage, duration, and claims procedures, please refer to the official Raymarine warranty documentation included with your purchase or visit the Raymarine website. The warranty description provided is: Garancija.

10. Podrška

For technical assistance, troubleshooting, or further information, please contact Raymarine Customer Support. You can typically find contact details on the official Raymarine webweb-mjestu ili u dokumentaciji koja se isporučuje s vašim proizvodom.

Online resursi: Visit the Raymarine website for FAQs, software updates, and additional product information.