NEC NP-V260 DLP projektor - uputstvo za upotrebu

1. Uvod

This manual provides essential information for the safe and efficient operation of your NEC NP-V260 DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference. This projector is designed for presenting high-definition content with 2600 ANSI lumens brightness.

2. Podešavanje

2.1 Raspakivanje i sadržaj

Carefully remove the projector and all accessories from the packaging. Verify that all components are present:

• NEC NP-V260 DLP Projector
• Kabl za napajanje
• Daljinski upravljač (ako je uključen)
• Korisnički priručnik (ovaj dokument)

2.2 Postavljanje projektora

Place the projector on a stable, level surface or mount it securely. Ensure adequate ventilation around the projector to prevent overheating. Maintain a suitable distance from the screen for the desired image size.

2.3 Povezivanje napajanja

1. Spojite kabel za napajanje na AC utičnicu projektora.
2. Uključite drugi kraj kabla za napajanje u uzemljenu električnu utičnicu.

2.4 Povezivanje ulaznih izvora

The NEC NP-V260 supports various input sources. Connect your device to the appropriate port:

• HDMI: Za digitalni video i audio visoke definicije.
• USB: For connecting USB devices or for firmware updates.
• Network (Wired & Wireless): For network control and content streaming, if supported by your model.

2.5 Početno uključivanje

Press the power button on the projector or remote control to turn on the unit. The power indicator light will change color, and the projector lamp će osvijetliti.

2.6 Podešavanje fokusa i zuma

This image displays the top panel of the NEC NP-V260 projector. Visible features include the focus and zoom rings on the lens, the NEC logo, a warning label for lamp type NP18LP, and the control panel with menu navigation buttons, source selection, and power button.

Adjust the focus ring around the lens until the projected image is sharp and clear. Use the zoom ring to adjust the image size to fit your screen.

3. Uputstvo za upotrebu

3.1 Osnovne kontrole

The projector features an on-board control panel. The main controls include:

• Dugme za napajanje: Uključuje ili isključuje projektor.
• Tipka Izvor: Cycles through available input sources (HDMI, USB, Network).
• Dugme menija: Pristupa meniju na ekranu (OSD).
• Navigacijski gumbi (gore/dolje/lijevo/desno): Used to navigate through OSD menus.
• Dugme Enter: Potvrđuje odabire u OSD meniju.
• Dugme za izlaz: Exits the current OSD menu or returns to the previous level.

3.2 Navigacija kroz ekranski meni (OSD)

Pritisnite Meni button to open the OSD. Use the navigation buttons to highlight options and the Enter button to select. Adjust settings such as picture mode, aspect ratio, and keystone correction.

3.3 Podešavanje postavki slike

Within the OSD, navigate to the 'Picture' or 'Image' menu to adjust:

• Svjetlina: Kontroliše ukupnu svjetlinu ili tamu slike.
• Kontrast: Podešava razliku između najsvjetlijih i najtamnijih dijelova slike.
• Boja: Modifies the intensity of colors.
• Nijansa: Adjusts the balance between red and green colors (NTSC only).
• Oštrina: Enhances or softens image edges.
• Omjer širine i visine: Selects the display format (e.g., 4:3, 16:9, Auto).

3.4 Shutting Down the Projector

Press the power button twice (or as indicated by the on-screen prompt) to safely shut down the projector. Allow the projector to cool down completely before unplugging or moving it.

4. Održavanje

4.1 Čišćenje objektiva

Pažljivo obrišite sočivo projektora mekom krpom koja ne ostavlja dlačice, posebno dizajniranom za optičke površine. Nemojte koristiti abrazivna sredstva za čišćenje ili prekomjernu silu.

4.2 Čišćenje vazdušnog filtera

Regularly clean the air filter to ensure proper ventilation and prevent overheating. Refer to the projector's specific instructions for filter removal and cleaning. A clogged filter can significantly reduce lamp life and projector performance.

4.3 Lamp Zamjena

Projektor lamp (Type: NP18LP) has a finite lifespan. When the lamp Ako indikatorska lampica svijetli ili slika postaje tamna, vrijeme je za zamjenuamp. Always use genuine NEC replacement lamps. Refer to the detailed lamp replacement procedure in the full user manual for safety precautions and steps.

4.4 Skladištenje

When not in use for extended periods, store the projector in a cool, dry place, protected from dust and extreme temperatures. Use the original packaging or a protective case if available.

5. Otkrivanje problema

Ako naiđete na probleme s projektorom, pogledajte sljedeće uobičajene korake za rješavanje problema:

• Nema slike: Ensure the power cord is securely connected, the projector is turned on, and the correct input source is selected. Check the connection cable between the projector and the source device.
• Zamućena slika: Adjust the focus ring on the lens. Ensure the projector is placed at an appropriate distance from the screen.
• Nema zvuka: Verify that the audio cable is connected (if using an analog input), the volume is turned up on both the projector and the source device, and the correct audio input is selected. HDMI connections typically carry audio automatically.
• Pregrijavanje projektora: Ensure air vents are not blocked. Clean the air filter. Operate the projector in a well-ventilated area.
• Lamp Indikatorska lampica uključena: This indicates the lamp is nearing its end of life or has failed. Replace the lamp (Type: NP18LP).

For more complex issues, contact NEC customer support or a qualified service technician.

6. Specifikacije

7. Garancija i podrška

7.1 Informacije o garanciji

The NEC NP-V260 DLP Projector is covered by a limited warranty. Please refer to the warranty card included with your product or visit the official NEC webZa detaljne uslove i odredbe posjetite stranicu. Sačuvajte dokaz o kupovini za slučaj reklamacije.

7.2 Korisnička podrška

For technical assistance, service, or further inquiries, please contact NEC customer support. You can find contact information and support resources on the official NEC Display Solutions webstranica: www.necdisplay.com/support