Gravity GR-EQ9

Gravity 7 Band Graphic Equalizer GR-EQ9

Uputstvo za upotrebu

1. Uvod

Thank you for choosing the Gravity 7 Band Graphic Equalizer GR-EQ9. This equalizer is designed to provide precise control over your car audio system, allowing you to fine-tune sound frequencies for an enhanced listening experience. Please read this manual thoroughly before installation and operation to ensure proper use and optimal performance.

2. Sigurnosne informacije

3. Sadržaj paketa

Verify that all items are present in your GR-EQ9 package:

Gravity GR-EQ9 mounting accessories including brackets, screws, and wiring harness.

Image: Included mounting brackets, screws, and wiring harness for the GR-EQ9.

4. Proizvod je gotovview

4.1. Kontrole na prednjoj ploči

Front panel of the Gravity GR-EQ9 showing all rotary knobs and input selector.

Slika: Vrh view of the GR-EQ9 front panel with all controls.

4.2. Priključci na stražnjoj ploči

Rear panel of the Gravity GR-EQ9 showing RCA inputs and outputs, and power terminals.

Image: Close-up of the GR-EQ9 rear panel connections.

5. Podešavanje

5.1. Instalacija

The GR-EQ9 is designed for flexible installation in various vehicle locations. Consider a location that allows for easy access to controls and proper ventilation.

Diagram showing how to mount the Gravity GR-EQ9 using brackets and screws.

Image: Mounting diagram for the GR-EQ9.

  1. Choose a suitable mounting location (e.g., under the dashboard, in the center console).
  2. Use the provided mounting brackets as a template to mark screw holes.
  3. Drill pilot holes and secure the brackets using the supplied screws.
  4. Attach the GR-EQ9 unit to the mounted brackets.

5.2. Ožičenje

Proper wiring is crucial for optimal performance and safety. Ensure all connections are secure and correctly polarized.

  1. Priključak za napajanje (+12V): Connect the +12V wire from the equalizer to a constant +12V power source from the vehicle's battery. Use an inline fuse (not supplied) for protection. The unit operates between 9V and 16V.
  2. Uzemljenje (GND): Connect the GND wire to a clean, unpainted metal surface on the vehicle chassis.
  3. Daljinsko uključivanje (REM): Connect the REM wire to the remote output of your head unit. This will turn the equalizer on and off with your car's audio system.
  4. RCA ulazi: Connect the RCA output from your head unit to the MAIN IN (L/R) inputs on the GR-EQ9. If using an auxiliary device, connect its RCA output to the AUX IN (L/R) inputs.
  5. RCA izlazi: Povežite FRONT OUT (L/R), REAR OUT (L/R), and SUB OUT (L/R) from the GR-EQ9 to the corresponding inputs on your amplifiers.

6. Uputstvo za upotrebu

Once installed, the GR-EQ9 allows for precise audio customization.

  1. Uključeno: The unit will power on automatically when the remote turn-on signal is received from your head unit.
  2. Odabir ulaza: Koristite AUX/CD Selector button to switch between your main audio source (CD) and the auxiliary input (AUX).
  3. Kontrola jačine zvuka: Podesite VOLUME knob to set the overall listening level.
  4. Kontrola subwoofera:
    • Koristite PODNIVO knob to control the output volume of your subwoofer.
    • Podesite SUB FREQ knob to set the low-pass crossover point for the subwoofer, typically between 60Hz and 90Hz, to blend with your main speakers.
  5. Podešavanja ekvilajzera: Use the seven individual frequency knobs (50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6KHz, 16KHz) to boost or cut specific frequency ranges. Adjust these to tailor the sound to your preference and vehicle acoustics. Each band offers a range of -12dB to +12dB.
  6. Fader kontrola: The FADER knob allows you to adjust the balance of sound between your front and rear speakers.
  7. Podešavanje ulaznog nivoa: Koristite HIGH LEVEL / MAIN LEVEL switch and corresponding knobs to match the input signal level from your head unit, preventing distortion.

7. Održavanje

8. Otkrivanje problema

ProblemMogući uzrokRješenje
Nema strujeBlown fuse; incorrect wiring; no remote signal.Check and replace fuse; verify +12V, GND, and REM connections.
Nema zvukaIncorrect RCA connections; amplifier not powered; input source issue.Verify all RCA cables are connected correctly; ensure amplifiers are on; check head unit output.
Izobličen zvukInput level too high; equalizer settings too extreme; poor grounding.Adjust input level using HIGH LEVEL/MAIN LEVEL controls; reduce EQ boost; check ground connection.
Noise/HissPoor grounding; RCA cables too close to power wires; gain settings too high.Ensure proper grounding; reroute RCA cables away from power wires; adjust amppostavke pojačanja lifiera.

9. Specifikacije

10. Garancija

This Gravity product is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase or contact customer support for specific terms and conditions. Keep your proof of purchase for warranty claims.

11. Podrška

For technical assistance, troubleshooting, or warranty inquiries, please contact Gravity customer support. Contact details can typically be found on the product packaging or the official Gravity website.