Parkside PES 200 B1 Electric Scraper User Manual

1. Uvod

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Parkside PES 200 B1 Electric Scraper. Please read these instructions carefully before using the device and keep them for future reference.

The Parkside PES 200 B1 is designed for removing stubborn residues such as wallpaper, adhesive, paint, silicone, and foam from various surfaces. It is also suitable for light wood carving tasks.

2. Sigurnosna uputstva

Opća sigurnosna upozorenja:

• Uvek nosite odgovarajuću ličnu zaštitnu opremu (PPE) kao što su zaštitne naočare, rukavice i zaštita za uši.
• Pobrinite se da radno područje bude dobro osvijetljeno i da nema prepreka.
• Držite djecu i osobe u blizini dok rukujete alatom.
• Nemojte koristiti električne alate u eksplozivnoj atmosferi, kao što je prisustvo zapaljivih tečnosti, gasova ili prašine.
• Always disconnect the power plug from the socket before making any adjustments, changing accessories, or storing the tool.
• Nemojte zloupotrebljavati kabl. Nikada nemojte koristiti kabel za nošenje, povlačenje ili isključivanje električnog alata. Držite kabl dalje od toplote, ulja, oštrih ivica ili pokretnih delova.
• Pažljivo održavajte alat. Provjerite ima li pokretnih dijelova nepravilnog poravnanja ili blokiranja, loma dijelova i bilo kojeg drugog stanja koje može utjecati na rad električnog alata.

Specific Safety Warnings for Electric Scrapers:

• Ensure the attachment is securely fastened before starting the tool.
• Be aware of hidden electrical wires or pipes when working on walls. Use a detector if necessary.
• Avoid applying excessive pressure; let the tool do the work.
• Do not touch the working end of the attachment during operation or immediately after, as it may be hot.

3. Proizvod je gotovview

3.1 Komponente

The Parkside PES 200 B1 Electric Scraper features a robust design for efficient material removal. Key components include:

• Stroke Rate Selection / On/Off Switch: Allows adjustment of the stroke rate and powers the device on or off.
• Rubberized Grip Area: Omogućava udobno i sigurno rukovanje.
• Karbonske četke: Essential motor components, designed for easy replacement.
• Quick-Change Mechanism for Tool Inserts: Enables fast and tool-free attachment changes.
• Guide Bearing: Supports the tool's movement.
• Cone/Plate Wheel: Internal drive component.
• Ventilator: For motor cooling.
• Housing Shell: Štiti unutrašnje komponente.
• Kabl za napajanje (4 m): Obezbeđuje ample reach.

Figure 1: Internal component diagram of the Parkside PES 200 B1 Electric Scraper. Labels indicate the Hubvorwahl/Ein-/Aus-Schalter (Stroke Rate Selection/On/Off Switch), Gummierter Griffbereich (Rubberized Grip Area), Kohlebürsten (Carbon Brushes), Schnellwechselmechanik für Werkzeugeinsätze (Quick-Change Mechanism for Tool Inserts), FührungsLager (Guide Bearing), Kegel/Tellerrad (Cone/Plate Wheel), Lüfterrad (Fan), Gehäuseschale (Housing Shell), and Netzleitung 4 m (Power Cable 4 m).

3.2 Included Attachments

The Parkside PES 200 B1 comes with 5 versatile attachments for various applications:

• Flat Spatula Attachment: Ideal for removing paint residues, silicone, and foams.
• Angled Knife/Scraper Attachment: Suitable for removing carpets, plaster residues, or unevenness.
• Flat Knife/Scraper Attachment: For removing carpets, felt, cork, plaster, adhesive, and plaster residues.
• Flat Chisel Attachment: For carving in wood.
• 13mm Gouge Attachment: Specifically for carving in softwoods.

Slika 2: Gotovoview of the 5 included attachments. From left to right: Spachtelaufsatz (flach) - Flat Spatula, Messer-/Schabaufsatz (gekröpft) - Angled Knife/Scraper, Messer-/Schabaufsatz (gerade) - Flat Knife/Scraper, Stechbeitelaufsatz (flach) - Flat Chisel, Geißfuß (13 mm) - 13mm Gouge.

4. Podešavanje

4.1 Attaching/Changing Tool Inserts

1. Ensure the electric scraper is unplugged from the power source.
2. Locate the quick-change mechanism at the front of the tool.
3. To insert an attachment, align the base of the desired tool insert with the quick-change mechanism and push it firmly until it clicks into place.
4. To remove an attachment, pull back the quick-change collar (if present) or press the release button, then pull the attachment out.
5. Always ensure the attachment is securely seated before operating the tool.

5. Uputstvo za upotrebu

5.1 Uključivanje/isključivanje

• To turn the tool ON, press the On/Off switch.
• Da biste isključili alat, otpustite prekidač za uključivanje/isključivanje.

5.2 Podešavanje brzine hoda

The PES 200 B1 offers three stroke rate settings for optimal performance on different materials:

• Postavka 1: Approximately 6,500 strokes/min (for delicate surfaces or lighter removal tasks).
• Postavka 2: Approximately 7,500 strokes/min (for general purpose removal).
• Postavka 3: Approximately 8,500 strokes/min (for stubborn residues and robust materials).

Use the stroke rate selection switch to choose the appropriate setting before starting work. Experiment on a scrap piece of material to find the best setting for your task.

5.3 Working with the Scraper

1. Select the appropriate attachment for the material you are working on (refer to Section 3.2).
2. Uključite alat u odgovarajuću utičnicu.
3. Hold the tool firmly with both hands, utilizing the rubberized grip area.
4. Place the attachment flat against the surface to be worked on.
5. Turn on the tool and apply gentle, even pressure. Allow the tool's vibrations to do the work.
6. Move the tool steadily across the surface, overlapping strokes slightly to ensure complete removal.
7. For wood carving, use the chisel or gouge attachments and apply controlled movements to shape the wood.
8. After use, turn off the tool and unplug it from the power source.

6. Održavanje

Regular maintenance ensures the longevity and optimal performance of your electric scraper.

6.1 Čišćenje

• Uvijek isključite alat prije čišćenja.
• Clean the tool's housing with a soft, damp tkanina. Nemojte koristiti jake hemikalije ili abrazivna sredstva za čišćenje.
• Remove any debris or material buildup from the quick-change mechanism and around the attachments.
• Otvore za ventilaciju držite slobodnim kako biste spriječili pregrijavanje.

6.2 Zamjena ugljeničnih četkica

The carbon brushes are wear parts and should be checked periodically. If the motor performance decreases or sparks become excessive, the carbon brushes may need replacement. This procedure should ideally be performed by a qualified technician or according to specific instructions provided with replacement brushes.

6.3 Skladištenje

• Alat čuvajte na suhom, sigurnom mjestu, van dohvata djece.
• Ensure the power cable is neatly coiled and not kinked.
• Store attachments in a protective case to prevent damage and loss.

7. Otkrivanje problema

8. Tehničke specifikacije

• Model: Parkside PES 200 B1
• Ulazna snaga: 200 Watt
• Stopa moždanog udara: 3-stage selectable (approx. 6,500 / 7,500 / 8,500 min^-1)
• Izvor napajanja: AC
• Dužina kabla: Pribl. 4 metara
• Proizvođač: Kompernass GmbH
• Broj dijela: 64186
• Boja: Zeleno
• Odobrenja: TÜV and GS approved

9. Garancija i podrška

This Parkside PES 200 B1 Electric Scraper is manufactured with high-quality materials and undergoes strict quality controls. For warranty claims, please retain your proof of purchase.

For technical support, spare parts, or warranty inquiries, please contact the manufacturer or your local distributor. Refer to your purchase documentation for specific contact details.

Proizvođač: Kompernass GmbH

Note: Information regarding specific warranty periods and conditions may vary by region and retailer.