1. Uvod
This manual provides essential information for the safe and correct installation, operation, and maintenance of your Thule Brink 380000 Tow Bar. Please read these instructions thoroughly before proceeding with installation or use. Retain this manual for future reference.
2. Sigurnosne informacije
WARNING: Incorrect installation or use can lead to serious injury or property damage.
- Always ensure the tow bar is correctly installed and secured according to these instructions and any vehicle-specific guidelines.
- Do not exceed the maximum towing load or D-value specified for this tow bar or your vehicle, whichever is lower.
- Regularly inspect the tow bar for signs of wear, damage, or corrosion. Do not use if damaged.
- Ensure all bolts and fasteners are tightened to the manufacturer's specified torque settings.
- Profesionalna instalacija se toplo preporučuje.
3. Sadržaj paketa
Prije početka instalacije provjerite da li su sve komponente prisutne:
- Thule Brink 380000 Tow Bar main frame
- Removable tow ball head
- Mounting hardware (bolts, nuts, washers) - Specific quantities and types may vary; refer to the packing list.
- Uputstvo za upotrebu (ovaj dokument)

Figure 1: Thule Brink 380000 Tow Bar. An image showing the Thule Brink 380000 Tow Bar, a black metal structure designed for vehicle towing. It features a main horizontal bar, two angled mounting arms, and a removable tow ball mechanism attached to the center of the horizontal bar.
4. Postavljanje i instalacija
The Thule Brink 380000 Tow Bar is designed for specific vehicle models. Always consult your vehicle's owner's manual and the specific fitting instructions provided with the tow bar for your vehicle make and model.
- Priprema: Park the vehicle on a level surface, engage the parking brake, and turn off the engine. Disconnect the vehicle's battery if required by vehicle-specific instructions.
- Pristup: Depending on the vehicle, it may be necessary to remove parts of the bumper, trim, or exhaust system to access the chassis mounting points.
- Mounting the Main Frame: Position the tow bar main frame against the vehicle's chassis mounting points. Secure it using the provided hardware. Ensure all bolts are correctly aligned and hand-tightened initially.
- Postavke obrtnog momenta: Refer to the vehicle-specific instructions for the correct torque settings for all fasteners. Use a calibrated torque wrench to tighten all bolts to the specified values.
- Installing the Removable Ball Head: Insert the removable ball head into its housing on the main frame from diagonally below, as indicated by the design. Ensure it locks securely into place. Follow specific instructions for engaging any locking mechanisms or safety pins.
- Electrical Connection (Sold Separately): If towing requires electrical connections for trailer lights, a separate wiring kit must be installed according to its own instructions and relevant regulations.
- Konačna provjera: Double-check all connections and ensure the tow bar is firmly attached and free from any movement. Reinstall any removed vehicle components.
NOTE: It is crucial to follow vehicle-specific instructions for proper fitment and safety. If you are unsure about any step, seek professional assistance.
5. Uputstvo za upotrebu
Before each use, perform a visual inspection of the tow bar and its components.
- Attaching a Trailer:
- Ensure the removable ball head is securely installed.
- Back your vehicle slowly towards the trailer hitch.
- Lower the trailer coupling onto the tow ball. Ensure it is fully seated and locked.
- Connect the safety chain(s) and any electrical connections.
- Verify that the trailer lights are functioning correctly.
- Detaching a Trailer:
- Park on a level surface and engage the vehicle's parking brake.
- Disconnect electrical connections and safety chain(s).
- Raise the trailer coupling off the tow ball.
- Removing the Ball Head: Follow the specific instructions for your removable ball head mechanism to unlock and remove it when not in use. This typically involves a key and a release lever.
IMPORTANT: Always adhere to local traffic laws and regulations regarding towing.
6. Održavanje
Regular maintenance ensures the longevity and safe operation of your tow bar.
- čišćenje: Clean the tow bar regularly, especially after exposure to road salt, dirt, or harsh weather conditions. Use mild soap and water, then rinse thoroughly.
- podmazivanje: Apply a suitable grease to the tow ball and any moving parts of the removable ball head mechanism periodically to ensure smooth operation and prevent corrosion.
- inspekcija: Before each towing operation, inspect the tow bar for:
- Cracks, bends, or deformation in the metal structure.
- Loose or missing bolts/nuts.
- Excessive wear on the tow ball.
- Corrosion or rust.
- Storage (Removable Ball Head): When the ball head is removed, store it in a clean, dry place to protect it from elements and damage.
7. Otkrivanje problema
Ovaj odjeljak se bavi uobičajenim problemima s kojima se možete susresti.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Tow ball head difficult to insert/remove. | Lack of lubrication, dirt/debris, mechanism misalignment. | Clean and lubricate the mechanism. Ensure correct alignment during insertion. Do not force. |
| Rattling noise from tow bar. | Loose mounting bolts, worn components, improper trailer coupling. | Check and re-torque all mounting bolts. Inspect for wear. Ensure trailer coupling is fully engaged. |
| Trailer sways excessively. | Improper weight distribution on trailer, excessive speed, worn vehicle suspension. | Adjust trailer load distribution. Reduce speed. Consult vehicle mechanic for suspension check. |
If you encounter issues not listed here or if solutions do not resolve the problem, contact Thule customer support or a qualified mechanic.
8. Specifikacije
- Model: Thule Brink 380000
- Towing Load: 3500 kg
- D-vrijednost: 15.9 kN
- Vrsta kuke: Ball bar inserted from diagonally below; with removable ball head
- Težina: 2.87 kg (Product only, not including packaging)
- Dimenzije proizvoda: 46.6 x 31.61 x 18.67 cm
- Certifikacija: EC
9. Garancija i podrška
Thule products are manufactured to high-quality standards and are guaranteed against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty information provided with your purchase or visit the official Thule website.
For technical support, spare parts, or warranty claims, please contact Thule customer service through their official channels. When contacting support, please have your product model number (380000) and purchase details available.
Službenik Thulea Webstranica: www.thule.com





