SEIKO SQ767W Digital Alarm Clock User Manual

1. Uvod

Hvala na kupoviniasing the SEIKO SQ767W Digital Alarm Clock. This compact and versatile clock features a digital display, dual alarms, a calendar, and displays both temperature and humidity. It is designed for convenience on your bedside table or desktop. This manual provides essential information for setup, operation, and maintenance to ensure optimal performance.

Slika 1: Prednja strana view of the SEIKO SQ767W Digital Alarm Clock.

2. Značajke proizvoda

• Dvostruki alarmi: Set two independent alarm times.
• Radio Wave Correction: Automatically corrects time by receiving standard radio waves (40 kHz/60 kHz automatic selection). Includes a radio wave off function.
• Digitalni prikaz: Clear display of time, date, temperature, and humidity.
• Funkcija odgode: Temporarily pauses the alarm.
• Funkcija svjetla: Osvjetljava ekran radi bolje vidljivosti pri slabom osvjetljenju.
• Alarm Monitor: Allows checking the alarm sound.
• Alarm Auto Stop: Alarm automatically stops after 5 minutes.
• Potpuno automatski kalendar: Displays the correct date automatically.
• Temperature/Humidity Display: Provides current room temperature and humidity readings.

3. Podešavanje

3.1 Instalacija baterije

1. Otvorite poklopac odeljka za baterije koji se nalazi na poleđini sata.
2. Insert two (2) AA manganese batteries, ensuring correct polarity (+/-).
3. Čvrsto zatvorite poklopac odeljka za baterije.

The clock requires 2 AA batteries, which are included with the product.

3.2 Početno uključivanje i prijem radio talasa

Upon battery installation, the clock will attempt to receive radio waves to set the time automatically. For best reception:

• Postavite sat blizu prozora.
• Avoid locations with potential radio interference, such as:
  • Inside buildings, basements, or areas with thick walls.
  • Blizu visoke jačinetage lines, TV towers, or train rails.
  • Close to electronic appliances (TVs, refrigerators, air conditioners, computers, etc.).
  • In vehicles (automotive, train, airplane).
  • Near metal furniture like steel desks.

If radio waves are not received, the clock will operate with quartz accuracy. Reception may vary depending on environmental conditions.

Figure 2: Radio wave coverage map for time synchronization.

4. Uputstvo za upotrebu

The control buttons are located on the back of the clock. Refer to Figure 3 for button identification.

Slika 3: Natrag view with control buttons.

4.1 Podešavanje vremena i datuma

• Automatic Setting (Radio Wave): The clock attempts to set the time and date automatically via radio wave reception. Ensure the clock is placed in an optimal reception area.
• Ručno podešavanje: If radio wave reception is not possible or desired, you can manually set the time and date using the '時刻/日付合わせ' (Time/Date Adjustment) button and other relevant controls on the back. Consult the detailed instructions for specific button sequences.

4.2 Podešavanje alarma (Alarm 1 i Alarm 2)

Sat ima dva nezavisna alarma.

1. Use the 'アラーム時刻合わせ' (Alarm Time Adjustment) button to select Alarm 1 or Alarm 2.
2. Adjust the desired alarm time using the appropriate adjustment buttons.
3. Toggle the 'アラーム1 ON/OFF' or 'アラーム2 ON/OFF' switch to activate or deactivate each alarm.

4.3 Snooze and Light Function

Press the large button on top of the clock to activate the snooze function when an alarm sounds. This button also illuminates the display temporarily when pressed outside of an alarm event.

4.4 Prikaz temperature i vlažnosti

The clock continuously displays the current room temperature and humidity on its screen. No special action is required to view these readings.

Figure 4: Close-up of the digital display.

5. Održavanje

5.1 Čišćenje

Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the casing ili prikaz.

5.2 Zamjena baterije

Replace batteries when the display dims or the clock's functions become unreliable. Always replace both batteries at the same time with new AA manganese batteries. Dispose of used batteries according to local regulations.

6. Otkrivanje problema

• Clock not displaying time/functions: Provjerite instalaciju baterija i uvjerite se da baterije nisu ispražnjene.
• Vrijeme je netačno: Ensure the clock is in an optimal location for radio wave reception. If automatic correction fails, manually set the time.
• Alarm se ne oglašava: Verify that the alarm is set to 'ON' and the alarm time is correctly configured.
• Ekran je taman: Zamijenite baterije.
• Radio wave reception issues: Relocate the clock away from electronic devices, metal objects, or large structures that may interfere with signals.

7. Specifikacije

8. Garancija i podrška

For warranty information or technical support, please refer to the documentation included with your purchase or contact SEIKO customer service. Keep your purchase receipt as proof of purchase.