Zoom H6 Six-Track Portable Recorder Instruction Manual

1. Proizvod je gotovview

The Zoom H6 is an advanced portable recorder designed for high-quality audio capture. It features a system of interchangeable input capsules, allowing for versatile microphone configurations. The device supports simultaneous recording across multiple tracks and offers flexible input options for various audio sources.

Ključne karakteristike uključuju:

• Direct recording to SD cards up to 128GB.
• Gain knobs, pads, and phantom power for each input.
• Newly redesigned preamps with an ultra-low noise floor.
• Up to 24-bit/96kHz audio recording in WAV or MP3 format.
• Multichannel and stereo USB audio interface for PC/Mac/iPad.
• Includes XYH-6 X/Y capsule, MSH-6 MS capsule, AA batteries, USB cable, sponge windscreen, and Cubase LE software.

Figure 1: Zoom H6 Recorder with the XYH-6 X/Y capsule installed.

2. Podešavanje

2.1. Umetanje baterija

The Zoom H6 operates on 4 AA batteries. To insert them:

1. Pronađite odjeljak za bateriju na stražnjoj strani uređaja.
2. Otvorite poklopac baterije.
3. Umetnite 4 AA baterije, vodeći računa o ispravnom polaritetu (+/-).
4. Čvrsto zatvorite poklopac baterije.

2.2. Umetanje SD kartice

The H6 records directly to SD cards. It supports cards up to 128GB.

1. Pronađite utor za SD karticu sa strane uređaja.
2. Insert a compatible SD card until it clicks into place.
3. Da biste uklonili karticu, lagano je pritisnite da biste je izbacili.

2.3. Attaching Microphone Capsules

The H6 comes with interchangeable capsules. The XYH-6 X/Y capsule and MSH-6 MS capsule are included.

1. Align the desired capsule with the connector on top of the H6.
2. Slide the capsule onto the connector until it locks into place.
3. To remove, press the release button and slide the capsule off.

Figure 2: Zoom H6 with interchangeable microphone capsules.

2.4. Connecting External Microphones/Line Inputs

The H6 features four XLR/TRS combo inputs for external microphones or line-level devices.

1. Connect your XLR or TRS cables to the corresponding inputs (1-4) on the side of the H6.
2. If using condenser microphones requiring phantom power, enable it in the device settings (see Section 3.2).

Figure 3: Zoom H6 with external microphones connected to XLR/TRS inputs.

3. Uputstvo za upotrebu

3.1. Uključivanje / isključivanje napajanja

To power on the H6, press and hold the power button located on the side until the screen illuminates. To power off, press and hold the power button until the shutdown prompt appears, then confirm.

3.2. Adjusting Input Levels and Phantom Power

Each input (1-4 and the attached capsule) has a dedicated gain knob. Use these to set appropriate recording levels.

• Potenciometri za pojačanje: Rotate to adjust the input sensitivity. Monitor the level meters on the display to avoid clipping.
• Jastučići: If an input signal is too strong even with the gain at minimum, engage the -20dB pad switch for that channel.
• Fantomska snaga: For condenser microphones, phantom power (+12V/+24V/+48V) can be enabled per channel through the menu settings.

3.3. Snimanje zvuka

The H6 supports up to six tracks of simultaneous recording.

1. Select the desired input channels for recording by pressing their respective arm buttons.
2. Adjust the input levels using the gain knobs and pads.
3. Pritisnite REC button once to enter record standby mode.
4. Pritisnite REC button again to start recording.
5. Pritisnite STOP dugme za zaustavljanje snimanja.

3.4. Praćenje zvuka

You can monitor your audio during recording or playback.

• slušalice: Connect headphones to the 3.5mm headphone jack on the side of the device. Adjust headphone volume using the dedicated volume control.
• Ugrađeni zvučnik: The H6 has a small built-in speaker for quick playback review.
• Izlaz: Use the 3.5mm Line Out jack to send audio to an external device like a camera or mixer.

Slika 4: Bočna strana view of Zoom H6 showing headphone and line out connections.

3.5. Funkcionalnost USB audio interfejsa

The H6 can function as a multi-channel or stereo USB audio interface for computers (PC/Mac) and iPads.

1. Connect the H6 to your computer or iPad using the supplied USB cable.
2. Select the desired USB mode (Audio Interface or Storage) on the H6 display.
3. Configure your computer's or iPad's audio settings to use the H6 as the input/output device.

4. Održavanje

• Uređaj održavajte čistim brisanjem mekom, suhom krpom. Izbjegavajte upotrebu tečnih sredstava za čišćenje.
• Store the H6 in a cool, dry place away from direct sunlight and extreme temperatures.
• Do not expose the device to very high humidity or allow it to be splashed by water.
• Izvadite baterije ako uređaj nećete koristiti duži period kako biste spriječili curenje.

5. Otkrivanje problema

5.1. Uređaj se ne uključuje

• Check if the batteries are inserted correctly and are not depleted.
• Ensure the power button is pressed and held sufficiently long.
• Ako koristite USB napajanje, provjerite je li USB kabel sigurno spojen i je li izvor napajanja aktivan.

5.2. No Audio Recording

• Verify that an SD card is inserted and has sufficient free space.
• Ensure the desired input channels are armed for recording.
• Check microphone connections and ensure phantom power is enabled if required.
• Adjust gain levels to ensure the input signal is not too low.

5.3. Poor Audio Quality (Distortion/Noise)

• Reduce input gain levels if the level meters are consistently peaking (going into the red). Engage the -20dB pad if necessary.
• Ensure microphone cables are in good condition and securely connected.
• Avoid recording in environments with excessive background noise.

6. Specifikacije

Figure 5: Detailed specifications for the Zoom H6 Recorder.

7. Garancija i podrška

Za informacije o garanciji i tehničkoj podršci, molimo pogledajte službenu Zoom stranicu. webweb-mjesto ili direktno kontaktirajte njihovu korisničku službu. Sačuvajte dokaz o kupovini za bilo kakve reklamacije u vezi s garancijom.