ADT Commercial Ice Machine User Manual

Uvod

Thank you for choosing the ADT Commercial Ice Machine, Model HZB-36F. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new ice maker. Please read this manual thoroughly before operating the appliance and retain it for future reference.

This commercial ice machine is designed to produce up to 80 lbs of clear ice cubes daily, with a storage capacity of 20 lbs. Its compact design allows for flexible installation as an undercounter or freestanding unit.

Važne informacije o sigurnosti

Please read all safety warnings and instructions carefully before use to prevent potential hazards and ensure proper operation.

• Uvjerite se da je uređaj pravilno uzemljen.
• Ne koristite aparat za led ako je oštećen kabel za napajanje ili utikač.
• Otvore za ventilaciju držite dalje od prepreka.
• Nemojte skladištiti eksplozivne materije kao što su aerosolne limenke sa zapaljivim gorivom u ovom uređaju.
• Ovaj uređaj je namijenjen za komercijalnu upotrebu.
• Uvijek isključite napajanje prije čišćenja ili održavanja.
• If your drain outlet height is more than 5.9 inches, a drain pump must be configured. The drain outlet should be no further than 12 inches from the ice machine. Failure to do so may result in water leakage.

Product Overview

The ADT Commercial Ice Machine HZB-36F features a durable stainless steel exterior and an intuitive LCD control panel for ease of use.

Ključne karakteristike:

• Brzo pravljenje leda: Produces 40 clear ice cubes per cycle in 11-20 minutes, with a daily output of up to 80 lbs. Each cube weighs 9g.
• Fleksibilna instalacija: Dimensions of 14.96"W x 19.29"D x 33.85"H (including 1.18" adjustable feet) allow for undercounter or freestanding placement. Features a front breathing design.
• LCD ekran: User-friendly control panel for power, delay, cleaning, and ice cube size adjustments.
• Izdržljiv dizajn: Stainless steel door with a full-length handle and bright blue LED interior lighting.

Postavljanje i instalacija

Proper installation is crucial for the performance and longevity of your ice machine. Please follow these steps carefully.

Raspakivanje:

1. Pažljivo uklonite sav materijal za pakovanje.
2. Inspect the ice machine for any shipping damage. Report any damage to your supplier immediately.
3. Ensure all accessories are present: Ice Scoop, In-Line Hose, Drain Hose.

Zahtjevi za lokaciju:

• Place the ice machine on a flat, stable surface.
• Ensure adequate ventilation around the unit. The front breathing design allows for built-in installation, but clearances should still be maintained as per local codes.
• Izbjegavajte direktnu sunčevu svjetlost ili izvore topline.
• Temperatura okoline treba biti između 10°C i 32°C.

Priključci za vodu i odvod:

1. Connect the supplied in-line hose to a potable water supply. Ensure the water pressure is within the recommended range (15-80 PSI).
2. Spojite odvodno crijevo na odgovarajući odvod. Važno: If your drain outlet height is more than 5.9 inches, or if the drain outlet is further than 12 inches from the ice machine, a separate drain pump mora be installed. This unit does not include a built-in drain pump.
3. Uvjerite se da su svi spojevi sigurni i da ne propuštaju.

Električni priključak:

• Plug the ice machine into a dedicated, grounded 115V AC outlet.
• Nemojte koristiti produžne kablove ili adapterske utikače.

Uputstvo za upotrebu

Familiarize yourself with the control panel and basic operations.

Control Panel (Refer to Figure 3):

• Dugme za napajanje (UKLJ./ISKLJUČ.): Pritisnite da uključite ili isključite jedinicu.
• Postavka tajmera: Allows you to set a time for the unit to turn on or off automatically.
• Ice Making Time Adjustment (+/-): Increase or decrease the ice making time to adjust ice cube size. Longer time results in larger cubes.
• Clean Function: Press and hold the power button for automatic cleaning.

Početna operacija:

1. After connecting water and power, press the Power button to turn on the unit.
2. The ice making process will begin automatically. The first few cycles may produce smaller or irregular ice cubes. This is normal.
3. Allow the unit to run for several hours to stabilize ice production.

Ice Making Reservation:

The unit supports setting a reservation time for ice making, allowing you to schedule when the ice production starts or stops.

Održavanje i čišćenje

Regular cleaning and maintenance will ensure optimal performance and extend the lifespan of your ice machine.

Svakodnevno održavanje:

• Obrišite spoljašnjost mekom krpom, damp tkanina.
• Ensure the ice scoop is clean and stored hygienically.

Sedmično/dvonedeljno čišćenje:

• Empty the ice storage bin and clean it with a mild detergent and warm water. Rinse thoroughly.
• Clean the water reservoir and ice making components.

Funkcija automatskog čišćenja:

The ice machine is equipped with an auto-cleaning feature for convenience.

1. Provjerite je li posuda za led prazna.
2. Add a small amount of ice machine cleaner (food-grade) to the water reservoir as per cleaner instructions.
3. Press and hold the "Clean" button (often integrated with the Power button, refer to Figure 3) to activate the auto-cleaning cycle.
4. Once the cycle is complete, drain the cleaning solution and rinse the unit thoroughly with fresh water by running several ice-making cycles and discarding the ice.

Čišćenje kondenzatora:

Periodically clean the condenser coils to ensure efficient operation. This should be done by a qualified technician or by following specific instructions in a more detailed service manual.

Rješavanje problema

Prije nego što kontaktirate korisničku službu, molimo pogledajte sljedeću tabelu za uobičajene probleme i njihova rješenja.

Specifikacije

Garancija i korisnička podrška

For warranty information, please refer to the warranty card included with your product or contact ADT customer support directly. Keep your proof of purchase for any warranty claims.

If you encounter issues not covered in the troubleshooting section or require further assistance, please contact ADT customer support. Contact details can typically be found on the manufacturer's webweb-mjestu ili na ambalaži proizvoda.

For the latest information and support, please visit the official ADT webweb-mjesto ili kontaktirajte njihovu liniju za korisničku podršku.