Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit Manual

1. Uvod

This manual provides comprehensive instructions for the Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit, model 11014085. This kit is designed to regulate airflow and reduce noise, ensuring optimal indoor air quality. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of the product.

Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit, white

Figure 1: Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit. This image shows the compact, rectangular design of the white air inlet unit.

2. Sigurnosna uputstva

Always follow basic safety precautions when installing or maintaining this product to reduce the risk of injury or damage.

Preporučena profesionalna instalacija: Installation should ideally be performed by a qualified professional to ensure compliance with local building codes and proper functionality.
Pročitajte uputstva: Prije početka instalacije pažljivo pročitajte sva uputstva.
Nosite zaštitnu opremu: Koristite odgovarajuću ličnu zaštitnu opremu (LZO) kao što su rukavice i zaštita za oči tokom instalacije.
Pregledajte ima li oštećenja: Prije instalacije, provjerite da li proizvod ima znakova oštećenja. Nemojte ugrađivati oštećene komponente.
Pravilna ventilacija: Ensure adequate ventilation during and after installation.
Čuvati van dohvata djece: Ovaj proizvod nije igračka. Držite ga van domašaja djece.
odlaganje: Dispose of packaging materials responsibly and according to local regulations.

3. Sadržaj paketa

Prije nego što nastavite s instalacijom, provjerite jesu li sve komponente prisutne i neoštećene.

1 x Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Unit
Installation accessories (e.g., mounting screws, seals - may vary by kit version)
Korisnički priručnik (ovaj dokument)

4. Podešavanje i instalacija

This section outlines the general steps for installing the Aldes EHL air inlet. Specific installation details may vary based on the type of wall or window and local building codes. Consult a professional if unsure.

Odaberite lokaciju: Select an appropriate location for the air inlet, typically on an exterior wall or window frame, ensuring it is not obstructed.
Pripremite otvaranje: Create an opening in the wall or window frame according to the dimensions specified in the product's technical data sheet (not provided in this manual, refer to manufacturer's webweb lokacija).
Install Outer Grille (if applicable): Secure the exterior grille to the outside of the opening.
Insert Air Inlet Unit: Carefully insert the Aldes EHL air inlet unit into the prepared opening from the interior side.
Sigurnosna jedinica: Use the provided mounting screws to firmly secure the air inlet unit to the wall or window frame. Ensure it is level and sealed properly to prevent air leaks.
Apply Seals: Apply any necessary seals or gaskets to ensure airtightness and acoustic performance.
Test funkcionalnost: After installation, verify that the air inlet's hygro-adjustable mechanism moves freely and that airflow is established.

Note: For detailed diagrams and specific mounting instructions, please refer to the technical documentation provided by ALDES or consult their official website.

5. Uputstvo za upotrebu

The Aldes EHL air inlet is a hygro-adjustable device, meaning its airflow capacity automatically adapts based on the humidity level in the room. This ensures optimal ventilation without manual intervention.

Automatsko podešavanje: The internal sensor detects changes in ambient humidity. As humidity increases (e.g., during showering or cooking), the air inlet opens further to allow more fresh air in. As humidity decreases, it reduces the airflow.
Akustične performanse: The "39dB" rating indicates its acoustic attenuation capabilities, designed to reduce external noise transmission while maintaining ventilation.
Nema korisničkih kontrola: This unit operates automatically and does not typically feature manual controls for airflow adjustment. Its design is intended for passive, demand-controlled ventilation.

6. Održavanje

Regular maintenance ensures the efficient and long-lasting operation of your Aldes EHL air inlet.

Učestalost čišćenja: It is recommended to clean the air inlet at least once a year, or more frequently in dusty environments.
Procedura čišćenja:
1. Gently remove the front cover of the air inlet.
2. Use a soft brush or a vacuum cleaner with a brush attachment to remove dust and debris from the grille and internal components.
3. Obrišite vanjske površine oglasomamp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili rastvarače.
4. Ensure the humidity sensor (if visible) is free from dust and obstructions.
5. Ponovo čvrsto pričvrstite prednji poklopac.
Do Not Obstruct: Ensure that the air inlet is never blocked by furniture, curtains, or other objects, as this will impair its performance.
inspekcija: Povremeno pregledavajte uređaj da li ima znakova oštećenja ili istrošenosti.

7. Otkrivanje problema

If you encounter issues with your Aldes EHL air inlet, refer to the following common problems and solutions.

Problem	Mogući uzrok	Rješenje
Nedovoljan protok vazduha	Air inlet or outer grille is obstructed. Dust accumulation on internal components. Humidity sensor is blocked or faulty. Incorrect installation or sealing.	Provjerite i uklonite sve prepreke. Clean the air inlet as described in the Maintenance section. Ensure the humidity sensor is clear. If still faulty, contact support. Verify proper installation and sealing.
Prekomjerna buka	Loose components or improper sealing. External noise sources. Air inlet operating at maximum flow due to high humidity.	Check mounting screws and seals. Identify and address external noise sources. This is normal operation. Ensure the unit is clean.
Unit Not Adjusting	Humidity sensor is dirty or damaged. Mechanical obstruction of the adjustment mechanism.	Clean the humidity sensor. If still unresponsive, the sensor may be faulty. Pregledajte ima li fizičkih prepreka koje sprječavaju kretanje.

If the problem persists after attempting these solutions, please contact Aldes customer support or a qualified technician.

8. Specifikacije

Key technical specifications for the Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit.

Broj modela: 11014085 (also AJA50015)
Brand: ALDES
Vrsta: Hygro-Adjustable Acoustic Air Inlet Kit
Raspon protoka zraka: 6 to 45 Liters per second (L/s)
Acoustic Attenuation: 39 dB
Boja: Bijelo
Oblik: Pravougaona
Proizvođač: ALDES AERAULIQUE
Uključene komponente: 1 Product (Air Inlet Unit)
Potrebne baterije: br
Kategorija proizvoda: Performance Part (HVAC, Ducts)
ASIN: B00DCK2EMW

9. Jamstvo i podrška

For warranty information, technical support, or to inquire about spare parts, please contact ALDES directly.

Proizvođač: ALDES AERAULIQUE
Webstranica: www.aldes.com
Služba za korisnike: Refer to the ALDES webstranica za regionalne kontakt informacije.
rezervni dijelovi: Information regarding spare parts availability is not provided in the product specifications. Please contact ALDES customer service for details.

	Aldes EHL L 6-44 m³/h - 39 dB - White: Acoustic Hygrometric Air Inlet Kit Detailed information on the Aldes EHL L hygrometric air inlet kit, including its technical specifications, acoustic performance, dimensions, and installation guidelines. This kit provides adjustable airflow for residential buildings, ensuring optimal air quality and acoustic comfort.
	Aldes EHL S 6-44 m³/h - 37 dB - White: Hygro-Regulated Air Inlet Detailed information on the Aldes EHL S hygro-regulated air inlet, featuring acoustic performance up to 42 dB, adjustable airflow, and ceiling-directed air flow. Includes technical specifications, dimensions, and installation guidelines.
	Aldes EHL S 6-44 m³/h - 37 dB Aluminium Air Inlet - Technical Specifications Detailed technical specifications for the Aldes EHL S 6-44 m³/h - 37 dB Aluminium hygro-regulated air inlet, including features, dimensions, acoustic data, and installation guidelines.
	Aldes EHL L 6-44 m³/h - 39 dB Antracit Higro-regulisani ulaz vazduha Tehničke specifikacije i uputstvo za ugradnju higroregulisanog usisnog otvora za vazduh Aldes EHL L, model 11014138, u antracit boji. Ima akustičnu atenuaciju do 42 dB i podesiv protok vazduha od 6-44 m³/h.
	Aldes EHL S 6-44 m³/h - 37 dB - Brown Hygro-regulated Air Inlet Technical specifications and installation guide for the Aldes EHL S hygro-regulated air inlet, featuring acoustic performance up to 42 dB, adjustable airflow based on humidity, and a discreet design. Includes dimensions, accessories, and acoustic data.
	Aldes EHL S 6-44 m³/h - 37 dB - Anthracite: Hygro-regulated Air Inlet Detailed information on the Aldes EHL S hygro-regulated air inlet, featuring acoustic performance up to 42 dB, adjustable airflow based on humidity, and a sleek design. Includes technical specifications, dimensions, and available accessories.

ALDES 11014085

Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit