STABILA 02143

STABILA Nivel 70 M 50cm libela - uputstvo za upotrebu

Model: 02143 | Brand: STABILA

STABILA Brand Logo

For more STABILA products, visit the official STABILA Brand Store.

1. Uvod

The STABILA Nivel 70 M 50cm is a high-quality spirit level designed for precise measurement tasks in various professional and DIY applications. Featuring a robust aluminum profile and a powerful rare-earth magnet system, this tool ensures accurate and reliable leveling. Its integrated vial technology and fluorescent fluid provide optimal readability and long-term accuracy, even under challenging conditions.

STABILA Nivel 70 M 50cm Spirit Level

Image 1.1: The STABILA Nivel 70 M 50cm spirit level, showcasing its robust design and clear vials.

2. Značajke proizvoda

3. Podešavanje

The STABILA Nivel 70 M 50cm spirit level requires minimal setup. Upon receiving your level, please follow these steps:

  1. Raspakirajte: Carefully remove the spirit level from its packaging.
  2. Pregledajte: Check the level for any visible damage that might have occurred during shipping. Ensure the vials are clear and free of bubbles (other than the measurement bubble).
  3. Upoznajte se: Take a moment to familiarize yourself with the level's features, including the magnetic strips on the measuring surface and the protective end caps.

4. Uputstvo za upotrebu

Using the STABILA Nivel 70 M 50cm is straightforward. Always ensure the measuring surface is clean before use to guarantee accuracy.

4.1. Horizontal Measurement

  1. Place the spirit level flat on the surface you wish to check for horizontal alignment.
  2. Observe the horizontal vial (the longer one). The bubble should be centered precisely between the two indicator lines.
  3. Adjust the surface until the bubble is perfectly centered.

4.2. Vertical Measurement

  1. Hold the spirit level vertically against the surface you wish to check for plumb (vertical alignment).
  2. Observe the vertical vial (the shorter one). The bubble should be centered precisely between the two indicator lines.
  3. Adjust the surface until the bubble is perfectly centered.

4.3. Using the Magnetic System

The integrated rare-earth magnets allow for hands-free operation on ferromagnetic surfaces.

Construction worker using a STABILA spirit level on a formwork

Image 4.1: A construction worker utilizing the spirit level for vertical alignment on a construction site.

5. Održavanje

Proper maintenance will ensure the longevity and accuracy of your STABILA spirit level.

6. Otkrivanje problema

If you encounter issues with your STABILA Nivel 70 M 50cm, consider the following:

ProblemMogući uzrokRješenje
Netačna očitavanjaDirty measuring surface; Level is not flat on surface; Level has been dropped or damaged.Clean the measuring surface; Ensure level is fully seated; If damaged, consider professional calibration or replacement.
Bubble not moving freelyVial fluid is frozen (extreme cold); Internal damage to vial.Allow level to warm to room temperature; If persistent, contact support.
Magnets not adhering stronglySurface is not ferromagnetic; Surface is too rough or dirty; Magnets are damaged.Ensure surface is suitable metal; Clean surface; Contact support if magnets are damaged.

7. Specifikacije

AtributVrijednost
ProizvođačSTABILA
Broj dijela02143
Dimenzije proizvoda50 x 2.1 x 5 cm
Težina410 g
Veličina50 cm
BojaMULTICOLOR (Yellow)
StilSa magnetom
MaterijalAluminijum
Izvor napajanjaHand Powered
Broj stavki u pakovanju1
Merni sistemMetric
Posebne karakteristikeRare-earth magnet system – strong adhesion
GTIN (globalni broj trgovinske jedinice)04005069021436

8. Garancija i podrška

STABILA products are known for their quality and durability. For specific warranty information, please refer to the documentation included with your purchase or visit the official STABILA website. In case of technical issues or questions not covered in this manual, please contact STABILA customer support.

Za dodatnu pomoć, možete se obratiti i STABILA Brand Store on Amazon.

Povezani dokumenti - 02143

Preview Upute za upotrebu laserskog nivelira STABILA LAX 300 G
Sveobuhvatno uputstvo za upotrebu laserskog nivelira STABILA LAX 300 G, koje detaljno opisuje njegovu namjenu, glavne komponente, načine rada, puštanje u rad, provjere kalibracije i tehničke specifikacije.
Preview Upute za upotrebu STABILA LAX serije 600
Sveobuhvatno uputstvo za upotrebu laserskog nivelira STABILA LAX serije 600, koje obuhvata namenu, komponente uređaja, puštanje u rad, funkcije, LED indikatore, upotrebu nosača, provere tačnosti i tehničke specifikacije. Uključuje sigurnosne smernice i operativne procedure.
Preview STABILA LAR 160 / LAR 160 G Uputstvo za upotrebu rotacionog laserskog nivelira
Uputstvo za upotrebu za rotacijske laserske nivelire STABILA LAR 160 i LAR 160 G. Uključuje uputstva za upotrebu, sigurnosne informacije, funkcije, tehničke specifikacije i provjere tačnosti za profesionalnu upotrebu na gradilištima.
Preview STABILA LD 220 Laserski mjerač udaljenosti - uputstvo za upotrebu
Sveobuhvatno uputstvo za upotrebu laserskog mjerača udaljenosti STABILA LD 220, koje pokriva proizvod prekoview, podešavanje instrumenta, tehničke specifikacije, kodovi poruka, garancija i kontakt informacije.
Preview STABILA LAR 160 / LAR 160 G Navodi za upotrebu - Rotacijski laser
Celovita uputstva za upotrebu za rotacijski laser STABILA LAR 160 in LAR 160 G. Uključuje sigurnosno upozorenje, opis elemenata uređaja, načine rada, funkcije, LED prikaz, provjerava točne tehničke podatke.
Preview STABILA LD 250 BT Laserski mjerač udaljenosti - uputstvo za upotrebu
Uputstvo za upotrebu laserskog mjerača udaljenosti STABILA LD 250 BT, u kojem su detaljno opisane njegove karakteristike, tehničke specifikacije, rad, sigurnosne smjernice i rješavanje problema.