1. Uvod
1.1. prekoview
The Hager WITTY charging station is designed for charging electric vehicles in accordance with Mode 3 (IEC 61851-1) and Mode 2 standards. It supports both Type 3 and standard socket connections, offering flexible charging solutions for various electric vehicles. This device operates on a 3-phase + Neutral, 32A electrical supply, delivering power from 4 kW to 22 kW.
1.2. Sigurnosna uputstva
- Installation must be performed by a qualified electrician in accordance with local and national electrical codes.
- Do not attempt to open or repair the charging station yourself. Contact qualified service personnel.
- Ensure the charging station is properly grounded.
- Do not use the charging station if it is damaged or shows signs of malfunction.
- Keep children and unauthorized persons away from the charging station during operation.
- Avoid exposing the charging station to extreme temperatures, direct sunlight for prolonged periods, or corrosive substances.
2. Opis proizvoda
2.1. Karakteristike
- Compatible with Mode 3 (Type 3) and Mode 2 charging.
- Free access operation.
- Power output: 4 kW to 22 kW.
- Input: 3-phase + Neutral, 32A.
- Integrated status indicator light.
2.2. Komponente
The Hager WITTY charging station typically includes:
- Charging station unit
- Montažni okovi (šrafovi, ankeri)
- Uputstvo za upotrebu (ovaj dokument)
Slika 1: Front view of the Hager WITTY charging station with a green operational light, mounted on a textured wall.
Slika 2: Side view of the Hager WITTY charging station, illustrating the cable connection point and the unit's profile.
Slika 3: Detaljan prednji dio view of the Hager WITTY charging station, emphasizing the integrated green status light.
3. Podešavanje
3.1. Lokacija instalacije
Choose a suitable location that is protected from direct impact, excessive moisture, and extreme temperatures. Ensure adequate ventilation and accessibility for maintenance.
3.2. Montaža
- Označite tačke za bušenje na zidu koristeći priloženi šablon (ako je primjenjivo) ili mjerenjem rupa za montažu na uređaju.
- Izbušite rupe i umetnite odgovarajuće zidne tiple.
- Secure the charging station to the wall using the provided screws.
3.3. Električni priključak
UPOZORENJE: Električnu instalaciju mora izvesti kvalifikovani električar.
- Ensure the main power supply is disconnected before beginning any electrical work.
- Connect the 3-phase + Neutral (3Ph+N) 32A power supply to the designated terminals inside the charging station.
- Osigurajte da je uspostavljeno pravilno uzemljenje.
- Verify all connections are secure and correctly wired according to the wiring diagram provided with the unit (refer to the separate installation guide for detailed diagrams).
- Close the charging station cover securely.
4. Operativni
4.1. Starting a Charge
- Ensure the charging station is powered on and the status indicator light is green (ready).
- Connect the charging cable to your electric vehicle's charging port.
- Connect the other end of the charging cable to the charging station's outlet (Type 3 or Mode 2 socket).
- The charging station will automatically initiate the charging process. The status indicator light may change to blue or flashing green, depending on the charging status.
4.2. Stopping a Charge
- Prvo isključite kabel za punjenje iz svog električnog vozila.
- Disconnect the charging cable from the charging station.
- The charging station will return to a ready state (green indicator light).
4.3. Indikatori statusa
- zeleno svjetlo: Ready for charging.
- Blue Light (or flashing green): Punjenje je u toku.
- Red Light (or flashing red): Error or fault detected. Refer to the Troubleshooting section.
- bez svjetla: Power off or system fault.
5. Održavanje
5.1. Čišćenje
Clean the exterior of the charging station with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals. Ensure the unit is powered off before cleaning.
5.2. Inspekcija
Periodically inspect the charging station for any signs of damage, wear, or loose connections. Check the charging cable for fraying or damage. If any damage is found, discontinue use and contact a qualified technician.
6. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| No power/No light | Power supply disconnected; Circuit breaker tripped. | Check power supply; Reset circuit breaker. If problem persists, contact a qualified electrician. |
| Crvena indikatorska lampica | Internal fault; Overcurrent; Ground fault. | Disconnect and reconnect the vehicle. If the error persists, power cycle the unit. If still red, contact service. |
| Punjenje ne počinje | Cable not properly connected; Vehicle not ready to charge; Charging station fault. | Ensure cable is securely connected to both vehicle and station. Check vehicle's charging status. Power cycle the charging station. |
7. Specifikacije
| Feature | Detalj |
|---|---|
| Model | XEV103 |
| Način punjenja | Mode 3 (IEC 61851-1), Mode 2 |
| Tip konektora | Type 3 / Standard Socket |
| Ulazni voltage | 3-phase + Neutral |
| Maks. Struja | 32A |
| Izlazna snaga | 4 kW do 22 kW |
| Pristup | Free Access |
| ASIN | B00CSJUVKA |
8. Garancija i podrška
For warranty information and technical support, please refer to the official Hager website or contact your local Hager distributor. Keep your purchase receipt for warranty claims.
Spare parts availability: Information not available.
