CRUX SOOGM-16 Uputstvo za upotrebu za zamjenski radio interfejs

Uvod

This manual provides comprehensive instructions for the installation and operation of the CRUX SOOGM-16 Radio Replacement Interface. This interface is designed to facilitate the integration of an aftermarket radio into select General Motors (GM) LAN 29-Bit vehicles, while retaining essential factory features such as OnStar, warning chimes, and steering wheel control functionality.

Please read this manual thoroughly before beginning the installation process to ensure proper setup and to avoid potential damage to your vehicle or the interface.

Product Overview

The CRUX SOOGM-16 is an advanced interface module that allows for seamless integration of an aftermarket car stereo system into compatible GM vehicles. It ensures that critical factory features continue to function after the original radio is replaced.

Slika 1: The CRUX SOOGM-16 interface module shown with its accompanying wiring harnesses and antenna adapter. This image displays all components included in the package, ready for installation.

Ključne karakteristike:

• Retains factory OnStar system.
• Preserves factory warning chimes.
• Maintains steering wheel control (SWC) functionality.
• Compatible with both Standard Bose, Premium Bose (Y91) amplified, and non-ampefikasne audio sisteme.
• Designed for select 2006-2014 GM LAN 29-Bit vehicles.
• Includes necessary module and harness for installation.

Kompatibilnost

The CRUX SOOGM-16 is compatible with specific General Motors vehicles. Please verify your vehicle's make, model, and year against the following criteria:

• Vrsta vozila: Select GM LAN 29-Bit vehicles.
• godine modela: 2006-2014.
• Audio Systems: Works with Standard Bose, Premium Bose (Y91) amplified, and non-amplifikovani sistemi.

Napomena: Always consult the vehicle-specific wiring diagrams and installation guides for your particular vehicle model to confirm compatibility and wiring details.

Sadržaj paketa

Prilikom raspakivanja, molimo Vas da se uvjerite da su sve sljedeće komponente prisutne:

• CRUX SOOGM-16 Interface Module
• Vehicle-Specific Wiring Harnesses
• Antenski adapter
• Steering Wheel Control (SWC) Cable (3.5mm jack)

Slika 2: Detaljno view of the CRUX SOOGM-16 module and its associated wiring components, including the main harness, auxiliary harness, and antenna adapter.

Uputstva za instalaciju

Odricanje od odgovornosti: Professional installation is recommended. Disconnect the vehicle's negative battery terminal before beginning any electrical work.

1. Dip Switch Settings

The CRUX SOOGM-16 module features configurable dip switches to match your specific vehicle and aftermarket radio. Refer to the diagram below and your aftermarket radio's manual for correct settings.

Slika 3: Krupni plan view of the CRUX SOOGM-16 interface module, highlighting the dip switches. These switches must be set correctly according to your vehicle's configuration and aftermarket radio type.

General Dip Switch Configuration Guidelines:

• SWC DIP: Set according to your aftermarket radio brand (e.g., Pioneer, Kenwood, Alpine, Sony, JVC, etc.). Consult the CRUX SOOGM-16 quick reference guide or CRUX website for specific brand settings.
• CAN DIP: Typically set based on vehicle year and system type (e.g., Bose amplificirano ili neamplified).
• Bose DIP: Set to 'ON' for Bose amplified systems, 'OFF' for non-Bose or non-amplifikovani sistemi.

Incorrect dip switch settings can lead to improper functionality or damage.

2. Ožičenje

Connect the CRUX SOOGM-16 wiring harness to your aftermarket radio's harness. Match wire colors and functions carefully. Common connections include:

• Napajanje/Uzemljenje: Red (Accessory), Yellow (Constant 12V), Black (Ground).
• Žice zvučnika: Front Left, Front Right, Rear Left, Rear Right (Positive and Negative).
• osvjetljenje: Orange (Illumination/Dimmer).
• Reverse/Parking Brake: If applicable for your aftermarket radio.
• Kontrola na volanu (SWC): Connect the 3.5mm jack from the SOOGM-16 harness to the SWC input on your aftermarket radio. If your radio uses a wired SWC input (e.g., Key1, Key2), refer to the SOOGM-16 wiring diagram for specific wire connections.
• OnStar/Chime Output: These are managed by the SOOGM-16 module and integrated into the main harness.
• Antenski adapter: Connect the provided antenna adapter between the vehicle's antenna cable and the aftermarket radio's antenna input.

Ensure all connections are secure using crimp connectors or solder and heat shrink tubing. Avoid loose connections.

3. Module Connection

1. Once all wiring harness connections are made between the aftermarket radio and the SOOGM-16 harness, connect the SOOGM-16 harness to the CRUX SOOGM-16 interface module.
2. Connect the vehicle's factory harness to the corresponding connectors on the SOOGM-16 harness.
3. Ponovo spojite negativni pol akumulatora vozila.

4. Testiranje

Before fully reassembling the dashboard, perform the following tests:

• Turn on the vehicle ignition and verify the aftermarket radio powers on.
• Test all audio functions (radio, auxiliary inputs, USB, Bluetooth).
• Verify steering wheel controls function correctly (volume up/down, track skip, mode).
• Confirm OnStar functionality (if applicable).
• Listen for factory warning chimes (e.g., door open, seatbelt reminder).

If any functions are not working, refer to the Troubleshooting section of this manual.

Uputstvo za upotrebu

The CRUX SOOGM-16 interface operates automatically once correctly installed and configured. It translates the vehicle's data signals to allow your aftermarket radio to function seamlessly with retained factory features.

Komande na volanu (SWC)

Your factory steering wheel controls will operate the aftermarket radio as programmed. Common functions include:

• Pojačavanje/stišavanje glasnoće: Podešava nivo audio izlaza.
• Track Up/Down: Skips tracks or changes radio presets.
• Način/Izvor: Cycles through available audio sources on the aftermarket radio.
• Isključi zvuk: Isključuje audio izlaz.

Napomena: Specific button assignments may vary depending on your vehicle and aftermarket radio model. Some aftermarket radios may require a learning process for SWC functionality, which should be detailed in the radio's instruction manual.

OnStar Retention

The SOOGM-16 retains the factory OnStar system. When OnStar is activated, the audio will mute through the aftermarket radio, and the OnStar audio will be heard through the vehicle's speakers. The OnStar microphone and controls will function as they did with the factory radio.

Warning Chimes

All factory warning chimes (e.g., door ajar, seatbelt, low fuel) will be retained and reproduced through the vehicle's audio system, ensuring critical alerts are still audible.

Održavanje

The CRUX SOOGM-16 Radio Replacement Interface is a sealed electronic module and requires no routine maintenance. Ensure it is installed in a dry, secure location within the dashboard, away from excessive heat or moisture.

Periodically check all wiring connections for security, especially if experiencing intermittent issues. Avoid exposing the module to direct sunlight or extreme temperatures.

Rješavanje problema

If you encounter issues after installation, refer to the following common problems and solutions:

No Power to Aftermarket Radio

• Provjerite vezu baterije: Ensure the vehicle's negative battery terminal is securely reconnected.
• Provjerite osigurače: Verify the vehicle's accessory fuse and any inline fuses for the aftermarket radio are intact.
• Ožičenje: Confirm the Yellow (Constant 12V) and Red (Accessory) wires are correctly connected from the SOOGM-16 harness to the aftermarket radio.
• Povezivanje modula: Ensure the SOOGM-16 module is securely plugged into its harness.

Steering Wheel Controls Not Functioning

• Postavke dip prekidača: Re-verify the SWC dip switch settings on the SOOGM-16 module match your aftermarket radio brand.
• SWC Connection: Ensure the 3.5mm SWC jack (or wired connection) is properly connected to the aftermarket radio's SWC input.
• Radio Configuration: Some aftermarket radios require a manual programming or "learning" process for steering wheel controls. Consult your radio's manual.

No Factory Chimes or OnStar Audio

• CAN Dip Switch: Verify the CAN dip switch setting on the SOOGM-16 module is correct for your vehicle's year and system type.
• Bose Dip Switch: If your vehicle has a Bose system, ensure the Bose dip switch is set to 'ON'.
• Povezivanje modula: Ensure the SOOGM-16 module is fully seated in its harness.

Distorted or No Audio

• Ožičenje zvučnika: Check all speaker wire connections for correct polarity and secure contact.
• Bose sistem: If you have a Bose system, ensure the Bose dip switch is correctly set. Incorrect settings can cause audio issues.
• Amplifier Remote: Ensure the remote turn-on wire for any factory or aftermarket amplifier is correctly connected.

If these steps do not resolve the issue, contact CRUX technical support or a qualified car audio installer.

Specifikacije

Garancija i podrška

Informacije o garanciji

CRUX products are typically covered by a limited manufacturer's warranty. For specific warranty terms, duration, and claim procedures, please refer to the warranty card included with your product or visit the official CRUX webSačuvajte dokaz o kupovini za slučaj reklamacije.

Tehnička podrška

For technical assistance, installation questions, or troubleshooting beyond the scope of this manual, please contact CRUX technical support. Contact information can usually be found on the CRUX webweb-mjestu ili na ambalaži proizvoda.

CRUX Webstranica: www.cruxinterfacing.com