KanexPro Adjustable Tilt Wall Mount Instruction Manual

Uvod

This manual provides comprehensive instructions for the safe and proper installation and operation of your KanexPro Adjustable Tilt Wall Mount. Please read this manual thoroughly before installation and retain it for future reference. This high-quality tilting wall mount bracket is designed for compatible televisions, offering a secure and adjustable viewing iskustvo.

Sigurnosne informacije

UPOZORENJE: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions, or have doubts about the safety of the installation, please contact a qualified installer.

• Do not install this product on walls that are not structurally sound. Ensure the mounting surface can safely support the combined weight of the mount and the display.
• Always use a stud finder to locate wooden studs. If mounting to concrete, ensure appropriate anchors are used.
• Ne prekoračujte maksimalnu nosivost od 75 kg (165 lbs).
• This mount is designed for indoor use only.
• Držite male dijelove podalje od djece.
• Uvijek neka instalaciju obavljaju najmanje dvije osobe kako bi se spriječile povrede ili oštećenja.

Sadržaj paketa

Please verify that all components are present and undamaged before installation. If any parts are missing or defective, contact KanexPro customer support.

• Sklapanje zidne ploče
• Nosači za TV (2)
• Komplet montažnog pribora (razni vijci, podloške, odstojnici, tiplovi)
• Upute za instalaciju (ovaj priručnik)

Image: The main components of the KanexPro wall mount, showing the wall plate and two vertical TV bracket arms.

Postavljanje i instalacija

Potreban alat (nije uključen): Pencil, Drill, Phillips Head Screwdriver, Level, Stud Finder, Measuring Tape, Hammer (for concrete anchors).

Korak 1: Pričvrstite TV nosače na TV

1. Pažljivo postavite televizor licem prema dolje na meku, čistu površinu kako biste spriječili oštećenje ekrana.
2. Identifikujte VESA rupe za montažu na poleđini vašeg TV-a.
3. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's mounting holes.
4. Attach the two TV bracket arms to the back of your TV, ensuring they are vertically aligned and securely fastened. The hooks on the bracket arms should face downwards.

Korak 2: Montirajte zidnu ploču na zid

1. Determine the desired height for your TV. Hold the wall plate against the wall and mark the top and bottom center points.
2. Use a stud finder to locate two adjacent wooden studs. Mark the center of each stud. The wall plate is designed to span two studs.
3. Position the wall plate against the wall, aligning the mounting holes with the marked stud centers. Use a level to ensure the wall plate is perfectly horizontal.
4. Mark the drill points through the holes on the wall plate.
5. Drill pilot holes at the marked locations. For wood studs, use a smaller drill bit than the lag bolts. For concrete, use a masonry drill bit and insert concrete anchors.
6. Pričvrstite zidnu ploču na zid pomoću priloženih vijaka i podloški. Čvrsto zategnite, ali nemojte previše zategnuti.

Image: Technical diagram illustrating the VESA compatibility ranges (min/max) for both horizontal and vertical dimensions, along with the overall measurements of the wall plate (32" wide x 8 7/8" high).

Korak 3: Objesite TV na zidnu ploču

1. Uz pomoć, pažljivo podignite TV pomoću priloženih nosača.
2. Align the hooks on the TV bracket arms with the top edge of the wall plate.
3. Pažljivo spustite TV, pazeći da se kuke sigurno zakače za zidnu ploču.
4. Once the TV is hanging, locate the safety screws or locking mechanisms on the bottom of the TV bracket arms. Tighten these to secure the TV to the wall plate and prevent accidental dislodging.
5. Verify that the TV is level and securely mounted.

Slika: Ugaona view of the KanexPro wall mount, highlighting the robust construction and the tilting mechanism on the bracket arms.

Operating the Tilt Feature

This wall mount features a variable downward tilt from 0° to -15°.

1. To adjust the tilt, locate the tilt adjustment knobs or bolts on the side of each TV bracket arm.
2. Loosen these knobs/bolts slightly.
3. Carefully tilt the bottom of your TV forward or backward to achieve the desired viewing kut.
4. Once the desired angle is set, firmly tighten the tilt adjustment knobs/bolts to secure the TV in place.

Održavanje

Redovno održavanje osigurava dugotrajnost i siguran rad vašeg zidnog nosača.

• čišćenje: Obrišite nosač mekom, suhom krpom. Ne koristite abrazivna sredstva za čišćenje ili rastvarače.
• Periodična provjera: Periodically check all screws and bolts to ensure they remain tight and secure. Retighten if necessary.
• Šteta: If any part of the mount appears damaged or worn, do not use it. Contact KanexPro for replacement parts or professional assistance.

Rješavanje problema

Specifikacije

• Broj modela: K-WALLM-14-BLK-0847
• Vrsta montaže: Zidni nosač
• Vrsta pokreta: Tilt
• Materijal: legirani čelik
• Boja: Black scratch resistant finish
• Maksimalni kapacitet težine: 165 lbs (75 kg)
• Funkcija nagiba: 0° to -15° Degrees (Variable Downward Tilt)
• Maximum Compatible TV Size: 51 inča
• Kompatibilni uređaji: Televizija
• Težina artikla: 13 funte (otprilike 5.9 kg)

Garancija i podrška

For warranty information and customer support, please refer to the KanexPro official website or contact their customer service department directly. Please have your model number (K-WALLM-14-BLK-0847) and purchase details ready when contacting support.

Proizvođač: KanexPro