AUTONICS CT6Y-I2 Digitalni brojač/tajmer Uputstvo za upotrebu

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of the AUTONICS CT6Y-I2 Digital Counter/Timer. The CT6Y-I2 is a compact, 6-digit LED indicator designed for precise counting and timing applications, featuring selectable PNP or NPN input and flexible power options.

2. Sigurnosne informacije

Please read and understand all safety precautions before installing or operating the CT6Y-I2 unit. Failure to follow these instructions may result in personal injury or product damage.

• Ensure power is disconnected before wiring or performing maintenance.
• Nemojte rastavljati niti modificirati jedinicu.
• Install the unit in an environment free from excessive dust, moisture, vibration, and corrosive gases.
• Use appropriate wire gauges and ensure secure connections.
• This device is intended for industrial control applications.

3. Proizvod je gotovview

The AUTONICS CT6Y-I2 is a versatile digital counter/timer with a dual 6-digit LED display. It is designed for panel mounting and offers various input and power supply options.

3.1 Ključne karakteristike

• Dual 6-Digit LED Display (Red for upper, Green for lower)
• Selectable Input Signal: Voltage (PNP) or No Voltage (NPN)
• Wide Power Supply Range: 24-48VDC / 24VAC
• High Counting Speed: Up to 10,000 counts per second
• Panel Mount Design (W72xH36mm)
• Prescaling Functionality
• Front Key Operation for easy setup and reset

3.2 Komponente prednje ploče

This image shows the front panel of the AUTONICS CT6Y-I2 Digital Counter/Timer. It features a dual 6-digit LED display, with the upper display typically showing the current count/time and the lower display showing the preset value or other parameters. To the right of the display are control buttons: RST (Reset), MD (Mode), and four arrow buttons (Up, Down, Left, Right) for navigation and adjustment. Indicators for OUT, CNT, TMR, LOCK, and PS are visible on the left side of the display, indicating operational status.

• Led displej: Shows current count/time and settings.
• RST dugme: Resets the counter or timer.
• MD Button: Used to cycle through modes or confirm settings.
• Dugmad sa strelicama: Used for navigating menus and adjusting values.
• Indicators (OUT, CNT, TMR, LOCK, PS): Provide visual feedback on the unit's status and selected function.

4. Postavljanje i instalacija

4.1 Montaža na panel

The CT6Y-I2 is designed for flush panel mounting. Ensure the panel cutout dimensions are W72mm x H36mm. Secure the unit using the provided mounting brackets.

4.2 Ožičenje

Refer to the wiring diagram on the unit's casing or in the full technical manual for precise connections. Ensure all connections are secure and correct before applying power.

• Napajanje: Connect to 24-48VDC or 24VAC. Verify correct polarity for DC power.
• Ulazni signal: The unit supports selectable Voltage (PNP) or No Voltage (NPN) inputs.
  • Voltage Input (PNP): Visok ulazni voltage (H) is 5-30VDC.
  • No Voltage Input (NPN): Niska ulazna voltage (L) is 0-2VDC.
• Izlazni priključci: Connect to external devices as required for control or indication.

5. Uputstvo za upotrebu

The CT6Y-I2 can function as both a counter and a timer. The specific operating mode and parameters are configured via the front panel buttons.

5.1 Osnovni rad

• Uključeno: Once wired correctly, apply power. The display will illuminate.
• Reset (RST): Press the RST button to clear the current count or timer value.
• Mode Selection (MD): Press the MD button to cycle through different operating modes or parameter settings. Hold the MD button to enter setup menus.
• Value Adjustment (Arrow Buttons): Use the Up/Down arrow buttons to change numerical values. Use the Left/Right arrow buttons to move the cursor for digit selection during setting adjustments.

5.2 Counter Mode

In counter mode, the unit increments or decrements based on input signals. Configure the input type (PNP/NPN) and counting direction in the setup menu.

• Brzina brojanja: The unit supports high-speed counting up to 10,000 counts per second.
• Prescaling: Set the prescaling range from 0.00001 to 99999.9 to adjust the display value relative to the input pulses.

5.3 Režim tajmera

In timer mode, the unit measures time intervals. Various timing operations (e.g., ON delay, OFF delay) can be selected. The minimum ON/OFF pulse duration is 0.1ms.

6. Održavanje

The AUTONICS CT6Y-I2 is designed for reliable operation with minimal maintenance.

• čišćenje: Pažljivo obrišite prednju ploču mekom, suhom krpom. Ne koristite abrazivna sredstva za čišćenje ili rastvarače.
• inspekcija: Povremeno provjeravajte spojeve ožičenja na čvrstoću i znakove istrošenosti ili oštećenja.
• Okruženje: Ensure the operating environment remains within specified conditions (temperature, humidity, absence of corrosive gases).

7. Otkrivanje problema

If the unit does not operate as expected, consider the following common issues:

• Bez prikaza: Provjerite priključke napajanja i jačinu zvukatage. Ensure the unit is receiving power within its specified range (24-48VDC / 24VAC).
• Incorrect Counting/Timing: Verify input signal wiring and type (PNP/NPN) settings. Check the prescaling value and minimum ON/OFF pulse settings. Ensure the input signal meets the required voltage levels (H: 5-30VDC, L: 0-2VDC).
• Dugmad ne reagiraju: Check if the unit is in a locked state (indicated by 'LOCK' indicator). Refer to the full manual for unlocking procedures.
• Nepravilno ponašanje: Check for electrical noise or interference in the environment. Ensure proper grounding.

For persistent issues, consult the comprehensive technical manual or contact AUTONICS support.

8. Specifikacije

9. Garancija i podrška

AUTONICS products are manufactured under strict quality control. For warranty information, please refer to the official AUTONICS website or contact your local distributor. For technical support, product inquiries, or service, please contact AUTONICS customer service directly.

Proizvođač: Autonics

Webstranica: www.autonics.com (Molimo provjerite najnovije kontakt informacije)