Linear 212LS-C26DCR-RT

Linear 212LS-C26DCR-RT Elektronska kontrola pristupa Cilindrična brava Korisnički priručnik

Model: 212LS-C26DCR-RT

1. Uvod

This manual provides instructions for the installation, operation, and maintenance of the Linear 212LS-C26DCR-RT Electronic Access Control Cylindrical Lockset. This lockset is designed for secure access control in both commercial and residential environments.

Ključne karakteristike:

  • Durable construction for extended lifespan.
  • Clutch lever design for enhanced security.
  • Long battery life (up to 15,000 keypad activations) with low-battery alert.
  • Password retention during battery removal.
  • Easy installation into standard cylindrical door preps (ANSI 151.8).
  • Master password control system for managing up to 120 user passwords.
  • Mechanical key override for emergency situations.

2. Sigurnosne informacije

Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in damage to the product, property, or personal injury.

  • Prilikom umetanja baterija, pazite na pravilan polaritet baterija.
  • Do not expose the lockset to extreme temperatures or moisture beyond its intended operating conditions.
  • Keep mechanical keys in a secure location, separate from the lockset.
  • Do not attempt to disassemble or repair the lockset yourself. Refer to qualified personnel for service.

3. Sadržaj paketa

Prije početka instalacije provjerite da li su svi elementi prisutni:

  • Linear 212LS-C26DCR-RT Electronic Access Control Cylindrical Lockset
  • Montažni hardver
  • 2 Mechanical keys
  • Korisnički priručnik (ovaj dokument)

Note: Four AA 1.5 volt batteries are required and are not included in the package.

4. Instalacija

The lockset is designed for easy installation into a standard cylindrical door preparation (ANSI 151.8).

4.1. Pripremite vrata

Ensure your door has a standard cylindrical door prep. If not, consult a professional for proper door preparation.

4.2. Install the Lockset

  1. Follow the detailed instructions provided with the mounting hardware to secure the lockset components to the door.
  2. Ensure all cables are properly connected and routed to avoid pinching.

4.3. Instalirajte baterije

  1. Locate the battery compartment, typically on the interior side of the lockset.
  2. Insert four (4) AA 1.5 volt batteries, ensuring correct polarity.
  3. Čvrsto zatvorite poklopac odeljka za baterije.

Linear 212LS-C26DCR-RT Electronic Access Control Cylindrical Lockset, Right Hand OpeningFigure 1: Linear 212LS-C26DCR-RT Lockset showing keypad and lever handle.

5. Operacija

The lockset operates using a keypad for electronic access or mechanical keys for override.

5.1. Initial Setup and Master Password

Upon initial power-up, you will need to set a master password. Refer to the specific programming instructions included with your lockset for this procedure. The master password allows for the management of up to 120 individual user passwords.

5.2. Adding User Passwords

Using the master password, you can add or delete up to 120 unique user passwords. Each user password grants access through the keypad.

5.3. Unos putem tastature

  1. Enter a valid user password on the keypad.
  2. The lock will disengage, allowing the handle to operate.
  3. If an incorrect code is entered, the handle will not mechanically engage the cylinder, preventing unauthorized entry.

5.4. Mehanički ključ za poništavanje

In emergency situations or if batteries are depleted, the provided mechanical keys can be used to unlock the door. Insert the key into the keyway and turn to unlock.

6. Održavanje

6.1. Zamjena baterije

The lockset is designed for approximately 15,000 keypad activations, which translates to about 5 years of usage based on 10 activations per day. A low-battery alert will indicate when batteries need replacement. Replace all four AA batteries simultaneously with new, high-quality alkaline batteries.

6.2. Čišćenje

Clean the lockset exterior with a soft, damp cloth. Avoid abrasive cleaners or solvents that may damage the finish or electronic components.

7. Otkrivanje problema

ProblemMogući uzrokRješenje
Handle does not engage after entering correct code.Low batteries or mechanical issue.Replace batteries. If problem persists, use mechanical key and contact support.
Tastatura ne reaguje.Dead batteries or internal electronic fault.Replace batteries. If still unresponsive, use mechanical key and contact support.
Cannot add or delete user passwords.Incorrect master password or programming error.Verify master password. Refer to programming instructions for correct procedure.

8. Specifikacije

FeatureDetalj
Broj modela212LS-C26DCR-RT
Dimenzije (D x Š x V)10.1 x 8.5 x 7.4 inča
Težina5.5 funti
Izvor napajanja4 AA 1.5V baterije (nisu uključene)
Trajanje baterijeApprox. 15,000 activations
Tip braveTastatura
Posebna karakteristikaVodootporan
MaterijalMetal

9. Garancija i podrška

This product typically comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Linear customer service. Contact information can usually be found on the manufacturer's webweb-mjestu ili na ambalaži proizvoda.

Note: The warranty period for this product is generally 24 months, primarily for wholesale purchasers. Please confirm your specific warranty coverage.

Povezani dokumenti - 212LS-C26DCR-RT

Preview Linear AK-11 Digital Keyless Entry System Installation and Programming Manual
The Linear AK-11 is a robust digital keyless entry system designed for access control applications. It features a durable cast aluminum enclosure, supports up to 480 programmable entry codes (1-6 digits), and offers multiple output options including two relays and two solid-state outputs. This system is ideal for controlling access to doors and gates, providing features like anti-passback, keypad lockout, and various input functionalities for enhanced security and convenience.
Preview Linear AK-11 Digital Keyless Entry System Installation and Programming Instructions
Comprehensive guide for installing and programming the Linear AK-11 Digital Keyless Entry System, covering features, specifications, wiring, setup, operation, and troubleshooting.
Preview Uputstvo za instalaciju Linear Entry Pro serije: Podešavanje hardvera i sistema
Ovaj priručnik pruža sveobuhvatne smjernice za instalaciju, ožičenje i konfiguraciju telefonskih sistema za ulaz i kontrolu pristupa Linear Entry Pro serije (EP-4xx, EP-7xx). Detaljno opisuje hardverske karakteristike, lokacije komponenti, dijagnostiku sistema, rješavanje problema i specifikacije za sigurno upravljanje pristupom.
Preview Linear AccessKey AK-1 Digital Keypad Entry System - Technical Specifications and Features
Detailed information on the Linear AccessKey AK-1, a digital keypad entry system for commercial access control, featuring rugged design, multiple outputs, and programmable PIN codes.
Preview Linearni bežični sistemi za ulaz: Tastature i kontroleri
Istražite Linear-ovu ponudu bežičnih sistema za ulaz, uključujući MDKP tastature, AP-5 kontrolere i razne tastature AK serije za sigurnu kontrolu pristupa u stambenim, komercijalnim i industrijskim primjenama.
Preview Bežični sistem kontrole pristupa Linear AM/II: Vodič za instalaciju i programiranje
Sveobuhvatna uputstva za instalaciju i programiranje bežičnog sistema kontrole pristupa Linear AM/II, koja obuhvataju funkcije, podešavanje i rad. Saznajte više o njegovim bežičnim mogućnostima, Wiegand/RS-232 interfejsima i opcijama umrežavanja.